From ee930fffee469d076998274a2ca55e13dc1efb67 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 08:50:54 +0000
Subject: [PATCH] enable tun/tap/iptables
---
kernel/drivers/misc/genwqe/card_base.c | 50 +++++++++++++++++++++++++++-----------------------
1 files changed, 27 insertions(+), 23 deletions(-)
diff --git a/kernel/drivers/misc/genwqe/card_base.c b/kernel/drivers/misc/genwqe/card_base.c
index c7cd367..c9b8866 100644
--- a/kernel/drivers/misc/genwqe/card_base.c
+++ b/kernel/drivers/misc/genwqe/card_base.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/**
* IBM Accelerator Family 'GenWQE'
*
@@ -7,15 +8,6 @@
* Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
* Author: Michael Jung <mijung@gmx.net>
* Author: Michael Ruettger <michael@ibmra.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License (version 2 only)
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
/*
@@ -24,7 +16,6 @@
* controlled from here.
*/
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/err.h>
@@ -174,6 +165,7 @@
/**
* genwqe_bus_reset() - Card recovery
+ * @cd: GenWQE device information
*
* pci_reset_function() will recover the device and ensure that the
* registers are accessible again when it completes with success. If
@@ -271,6 +263,7 @@
/**
* genwqe_recovery_on_fatal_gfir_required() - Version depended actions
+ * @cd: GenWQE device information
*
* Bitstreams older than 2013-02-17 have a bug where fatal GFIRs must
* be ignored. This is e.g. true for the bitstream we gave to the card
@@ -289,6 +282,7 @@
/**
* genwqe_T_psec() - Calculate PF/VF timeout register content
+ * @cd: GenWQE device information
*
* Note: From a design perspective it turned out to be a bad idea to
* use codes here to specifiy the frequency/speed values. An old
@@ -312,6 +306,7 @@
/**
* genwqe_setup_pf_jtimer() - Setup PF hardware timeouts for DDCB execution
+ * @cd: GenWQE device information
*
* Do this _after_ card_reset() is called. Otherwise the values will
* vanish. The settings need to be done when the queues are inactive.
@@ -338,6 +333,7 @@
/**
* genwqe_setup_vf_jtimer() - Setup VF hardware timeouts for DDCB execution
+ * @cd: GenWQE device information
*/
static bool genwqe_setup_vf_jtimer(struct genwqe_dev *cd)
{
@@ -552,6 +548,7 @@
/**
* genwqe_stop() - Stop card operation
+ * @cd: GenWQE device information
*
* Recovery notes:
* As long as genwqe_thread runs we might access registers during
@@ -578,6 +575,8 @@
/**
* genwqe_recover_card() - Try to recover the card if it is possible
+ * @cd: GenWQE device information
+ * @fatal_err: Indicate whether to attempt soft reset
*
* If fatal_err is set no register access is possible anymore. It is
* likely that genwqe_start fails in that situation. Proper error
@@ -627,6 +626,7 @@
/**
* genwqe_fir_checking() - Check the fault isolation registers of the card
+ * @cd: GenWQE device information
*
* If this code works ok, can be tried out with help of the genwqe_poke tool:
* sudo ./tools/genwqe_poke 0x8 0xfefefefefef
@@ -771,6 +771,7 @@
/**
* genwqe_pci_fundamental_reset() - trigger a PCIe fundamental reset on the slot
+ * @pci_dev: PCI device information struct
*
* Note: pci_set_pcie_reset_state() is not implemented on all archs, so this
* reset method will not work in all cases.
@@ -835,8 +836,9 @@
return rc;
}
-/*
+/**
* genwqe_reload_bistream() - reload card bitstream
+ * @cd: GenWQE device information
*
* Set the appropriate register and call fundamental reset to reaload the card
* bitstream.
@@ -889,6 +891,7 @@
/**
* genwqe_health_thread() - Health checking thread
+ * @data: GenWQE device information
*
* This thread is only started for the PF of the card.
*
@@ -1052,18 +1055,17 @@
static int genwqe_health_check_stop(struct genwqe_dev *cd)
{
- int rc;
-
if (!genwqe_health_thread_running(cd))
return -EIO;
- rc = kthread_stop(cd->health_thread);
+ kthread_stop(cd->health_thread);
cd->health_thread = NULL;
return 0;
}
/**
* genwqe_pci_setup() - Allocate PCIe related resources for our card
+ * @cd: GenWQE device information
*/
static int genwqe_pci_setup(struct genwqe_dev *cd)
{
@@ -1149,6 +1151,7 @@
/**
* genwqe_pci_remove() - Free PCIe related resources for our card
+ * @cd: GenWQE device information
*/
static void genwqe_pci_remove(struct genwqe_dev *cd)
{
@@ -1163,7 +1166,8 @@
/**
* genwqe_probe() - Device initialization
- * @pdev: PCI device information struct
+ * @pci_dev: PCI device information struct
+ * @id: PCI device ID
*
* Callable for multiple cards. This function is called on bind.
*
@@ -1223,6 +1227,7 @@
/**
* genwqe_remove() - Called when device is removed (hot-plugable)
+ * @pci_dev: PCI device information struct
*
* Or when driver is unloaded respecitively when unbind is done.
*/
@@ -1242,14 +1247,16 @@
genwqe_dev_free(cd);
}
-/*
+/**
* genwqe_err_error_detected() - Error detection callback
+ * @pci_dev: PCI device information struct
+ * @state: PCI channel state
*
* This callback is called by the PCI subsystem whenever a PCI bus
* error is detected.
*/
static pci_ers_result_t genwqe_err_error_detected(struct pci_dev *pci_dev,
- enum pci_channel_state state)
+ pci_channel_state_t state)
{
struct genwqe_dev *cd;
@@ -1333,7 +1340,7 @@
return 0;
}
-static struct pci_error_handlers genwqe_err_handler = {
+static const struct pci_error_handlers genwqe_err_handler = {
.error_detected = genwqe_err_error_detected,
.mmio_enabled = genwqe_err_result_none,
.slot_reset = genwqe_err_slot_reset,
@@ -1351,6 +1358,8 @@
/**
* genwqe_devnode() - Set default access mode for genwqe devices.
+ * @dev: Pointer to device (unused)
+ * @mode: Carrier to pass-back given mode (permissions)
*
* Default mode should be rw for everybody. Do not change default
* device name.
@@ -1378,10 +1387,6 @@
class_genwqe->devnode = genwqe_devnode;
debugfs_genwqe = debugfs_create_dir(GENWQE_DEVNAME, NULL);
- if (!debugfs_genwqe) {
- rc = -ENOMEM;
- goto err_out;
- }
rc = pci_register_driver(&genwqe_driver);
if (rc != 0) {
@@ -1393,7 +1398,6 @@
err_out0:
debugfs_remove(debugfs_genwqe);
- err_out:
class_destroy(class_genwqe);
return rc;
}
--
Gitblit v1.6.2