From ee930fffee469d076998274a2ca55e13dc1efb67 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 08:50:54 +0000
Subject: [PATCH] enable tun/tap/iptables
---
kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi | 140 +++++++++++++++++++++++++++++++---------------
1 files changed, 94 insertions(+), 46 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi b/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
index ad8ce8e..7443c1f 100755
--- a/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
+++ b/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
@@ -89,6 +89,24 @@
regulator-boot-on;
};
#endif
+
+ leds: leds {
+ compatible = "gpio-leds";
+ sig_led: sig_led {
+ gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ err_led: err_led {
+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+
ndj_io_init {
compatible = "nk_io_control";
pinctrl-names = "default";
@@ -106,8 +124,18 @@
gpio_function = <0>;
};
- hub_host2_rst {
- gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
+ vcc_3.3v {
+ gpio_num = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
+ gpio_function = <0>;
+ };
+
+ ax88772_rst {
+ gpio_num = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; //AX88772_RST_GPIO3_B5_3V3
+ gpio_function = <3>;
+ };
+
+ ax88631_rst {
+ gpio_num = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>; //AX88772_RST_GPIO3_B6_3V3
gpio_function = <3>;
};
@@ -136,10 +164,10 @@
gpio_function = <0>;
};
- hp_en {
- gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;//HP_EN_GPIO3_A6_3V3
- gpio_function = <0>;
- };
+ //gpio99 {
+ // gpio_num = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;//HP_EN_GPIO3_A6_3V3
+ // gpio_function = <1>;
+ //};
wifi_power_en {
gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
@@ -226,8 +254,8 @@
nodka-lvds = <15>;
display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
+ native-mode = <&timing>;
+ timing: timing {
clock-frequency = <72500000>;
hactive = <1280>;
vactive = <800>;
@@ -244,8 +272,8 @@
};
};
ports {
- panel_in: endpoint {
- remote-endpoint = <&edp_out>;
+ panel_in_lvds: endpoint {
+ remote-endpoint = <&lvds_out>;
};
};
};
@@ -337,7 +365,7 @@
*/
&video_phy1 {
- status = "okay";
+ status = "disabled";
};
&dsi1 {
status = "disabled";
@@ -348,11 +376,11 @@
};
&dsi1_in_vp1 {
- status = "okay";
+ status = "disabled";
};
&dsi1_panel {
- power-supply = <&vcc3v3_lcd1_n>; //MIPI_3V3EN_GPIO3_A3_d_3V3
+// power-supply = <&vcc3v3_lcd1_n>; //MIPI_3V3EN_GPIO3_A3_d_3V3
vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
@@ -372,20 +400,11 @@
&edp {
force-hpd;
- status = "okay";
- ports {
- port@1 {
- reg = <1>;
- edp_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
-
- };
+ status = "disabled";
};
&edp_phy {
- status = "okay";
+ status = "disabled";
};
&edp_in_vp0 {
@@ -393,18 +412,40 @@
};
&edp_in_vp1 {
- status = "okay";
+ status = "disabled";
};
&route_edp {
- status = "okay";
+ status = "disabled";
connect = <&vp1_out_edp>;
};
&route_edp {
- status = "okay";
+ status = "disabled";
};
+
+&lvds {
+ status = "disabled";
+ ports {
+ port@1 {
+ reg = <1>;
+ lvds_out:endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+};
+
+&route_lvds{
+ status = "okay";
+ connect = <&vp1_out_lvds>;
+};
+
+&lvds_in_vp1 {
+ status = "disabled";
+};
+
/*
* edp_end
*/
@@ -622,7 +663,7 @@
&pcie30phy {
- status = "okay";
+ status = "disabled";
};
&pcie2x1 {
@@ -681,11 +722,21 @@
<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
- <2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
- <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
- <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
- <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
+ <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B0_u_3V3 DO1 8
+ <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B3_u_3V3 DO2 11
+ <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B4_u_3V3 DO3 12
+ <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B5_u_3V3 DO4 13
+ <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B6_u_3V3 DO5 14
+
+ <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C0_d_3V3 DI1 16
+ <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C1_d_3V3 DI2 17
+ <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C2_d_3V3 DI3 18
+ <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C3_d_3V3 DI4 19
+ <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C5_d_3V3 DI5 21
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -751,15 +802,6 @@
pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
};
-&vcc3v3_lcd0_n {
- gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-};
-
-&vcc3v3_lcd1_n {
- gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
- enable-active-high;
-};
&wireless_wlan {
pinctrl-names = "default";
@@ -779,17 +821,17 @@
BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
BT,wake_gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ status = "disabled";
};
&uart0 {
- status = "okay";
+ status = "disabled";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
- status = "okay";
+ status = "disabled";
};
&uart3 {
@@ -798,7 +840,7 @@
};
&uart4 {
- status = "okay";
+ status = "disabled";
pinctrl-0 = <&uart4m1_xfer>;
};
@@ -807,12 +849,18 @@
pinctrl-0 = <&uart5m1_xfer>;
};
+
&uart7 {
status = "okay";
pinctrl-0 = <&uart7m1_xfer>;
};
+&uart8 {
+ status = "disabled";
+ pinctrl-0 = <&uart8m1_xfer>;
+};
+
&uart9 {
- status = "okay";
+ status = "disabled";
pinctrl-0 = <&uart9m1_xfer>;
};
--
Gitblit v1.6.2