From ea08eeccae9297f7aabd2ef7f0c2517ac4549acc Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 20 Feb 2024 01:18:26 +0000
Subject: [PATCH] write in 30M
---
kernel/drivers/spi/spi-davinci.c | 82 +++++++---------------------------------
1 files changed, 15 insertions(+), 67 deletions(-)
diff --git a/kernel/drivers/spi/spi-davinci.c b/kernel/drivers/spi/spi-davinci.c
index b560389..fda7322 100644
--- a/kernel/drivers/spi/spi-davinci.c
+++ b/kernel/drivers/spi/spi-davinci.c
@@ -1,21 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2009 Texas Instruments.
* Copyright (C) 2010 EF Johnson Technologies
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
@@ -25,7 +16,6 @@
#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/slab.h>
@@ -208,13 +198,11 @@
static void davinci_spi_chipselect(struct spi_device *spi, int value)
{
struct davinci_spi *dspi;
- struct davinci_spi_platform_data *pdata;
struct davinci_spi_config *spicfg = spi->controller_data;
u8 chip_sel = spi->chip_select;
u16 spidat1 = CS_DEFAULT;
dspi = spi_master_get_devdata(spi->master);
- pdata = &dspi->pdata;
/* program delay transfers if tx_delay is non zero */
if (spicfg && spicfg->wdelay)
@@ -224,15 +212,15 @@
* Board specific chip select logic decides the polarity and cs
* line for the controller
*/
- if (spi->cs_gpio >= 0) {
+ if (spi->cs_gpiod) {
if (value == BITBANG_CS_ACTIVE)
- gpio_set_value(spi->cs_gpio, spi->mode & SPI_CS_HIGH);
+ gpiod_set_value(spi->cs_gpiod, 1);
else
- gpio_set_value(spi->cs_gpio,
- !(spi->mode & SPI_CS_HIGH));
+ gpiod_set_value(spi->cs_gpiod, 0);
} else {
if (value == BITBANG_CS_ACTIVE) {
- spidat1 |= SPIDAT1_CSHOLD_MASK;
+ if (!(spi->mode & SPI_CS_WORD))
+ spidat1 |= SPIDAT1_CSHOLD_MASK;
spidat1 &= ~(0x1 << chip_sel);
}
}
@@ -242,7 +230,8 @@
/**
* davinci_spi_get_prescale - Calculates the correct prescale value
- * @maxspeed_hz: the maximum rate the SPI clock can run at
+ * @dspi: the controller data
+ * @max_speed_hz: the maximum rate the SPI clock can run at
*
* This function calculates the prescale value that generates a clock rate
* less than or equal to the specified maximum.
@@ -419,35 +408,15 @@
*/
static int davinci_spi_setup(struct spi_device *spi)
{
- int retval = 0;
struct davinci_spi *dspi;
- struct davinci_spi_platform_data *pdata;
- struct spi_master *master = spi->master;
struct device_node *np = spi->dev.of_node;
bool internal_cs = true;
dspi = spi_master_get_devdata(spi->master);
- pdata = &dspi->pdata;
if (!(spi->mode & SPI_NO_CS)) {
- if (np && (master->cs_gpios != NULL) && (spi->cs_gpio >= 0)) {
- retval = gpio_direction_output(
- spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
+ if (np && spi->cs_gpiod)
internal_cs = false;
- } else if (pdata->chip_sel &&
- spi->chip_select < pdata->num_chipselect &&
- pdata->chip_sel[spi->chip_select] != SPI_INTERN_CS) {
- spi->cs_gpio = pdata->chip_sel[spi->chip_select];
- retval = gpio_direction_output(
- spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
- internal_cs = false;
- }
-
- if (retval) {
- dev_err(&spi->dev, "GPIO %d setup failed (%d)\n",
- spi->cs_gpio, retval);
- return retval;
- }
if (internal_cs)
set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
@@ -602,7 +571,6 @@
u32 errors = 0;
struct davinci_spi_config *spicfg;
struct davinci_spi_platform_data *pdata;
- unsigned uninitialized_var(rx_buf_count);
dspi = spi_master_get_devdata(spi->master);
pdata = &dspi->pdata;
@@ -737,7 +705,7 @@
/**
* dummy_thread_fn - dummy thread function
* @irq: IRQ number for this SPI Master
- * @context_data: structure for SPI Master controller davinci_spi
+ * @data: structure for SPI Master controller davinci_spi
*
* This is to satisfy the request_threaded_irq() API so that the irq
* handler is called in interrupt context.
@@ -750,7 +718,7 @@
/**
* davinci_spi_irq - Interrupt handler for SPI Master Controller
* @irq: IRQ number for this SPI Master
- * @context_data: structure for SPI Master controller davinci_spi
+ * @data: structure for SPI Master controller davinci_spi
*
* ISR will determine that interrupt arrives either for READ or WRITE command.
* According to command it will do the appropriate action. It will check
@@ -971,11 +939,12 @@
if (ret)
goto free_master;
+ master->use_gpio_descriptors = true;
master->dev.of_node = pdev->dev.of_node;
master->bus_num = pdev->id;
master->num_chipselect = pdata->num_chipselect;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
- master->flags = SPI_MASTER_MUST_RX;
+ master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_GPIO_SS;
master->setup = davinci_spi_setup;
master->cleanup = davinci_spi_cleanup;
master->can_dma = davinci_spi_can_dma;
@@ -985,30 +954,9 @@
dspi->prescaler_limit = pdata->prescaler_limit;
dspi->version = pdata->version;
- dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP;
+ dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP | SPI_CS_WORD;
if (dspi->version == SPI_VERSION_2)
dspi->bitbang.flags |= SPI_READY;
-
- if (pdev->dev.of_node) {
- int i;
-
- for (i = 0; i < pdata->num_chipselect; i++) {
- int cs_gpio = of_get_named_gpio(pdev->dev.of_node,
- "cs-gpios", i);
-
- if (cs_gpio == -EPROBE_DEFER) {
- ret = cs_gpio;
- goto free_clk;
- }
-
- if (gpio_is_valid(cs_gpio)) {
- ret = devm_gpio_request(&pdev->dev, cs_gpio,
- dev_name(&pdev->dev));
- if (ret)
- goto free_clk;
- }
- }
- }
dspi->bitbang.txrx_bufs = davinci_spi_bufs;
--
Gitblit v1.6.2