From ea08eeccae9297f7aabd2ef7f0c2517ac4549acc Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 20 Feb 2024 01:18:26 +0000
Subject: [PATCH] write in 30M
---
kernel/drivers/mfd/lpc_ich.c | 69 +++++++++++++++++++++++++++-------
1 files changed, 55 insertions(+), 14 deletions(-)
diff --git a/kernel/drivers/mfd/lpc_ich.c b/kernel/drivers/mfd/lpc_ich.c
index 53dc1a4..2411b7a 100644
--- a/kernel/drivers/mfd/lpc_ich.c
+++ b/kernel/drivers/mfd/lpc_ich.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* lpc_ich.c - LPC interface for Intel ICH
*
@@ -10,15 +11,6 @@
* Copyright (c) 2011 Extreme Engineering Solution, Inc.
* Author: Aaron Sierra <asierra@xes-inc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*
* This driver supports the following I/O Controller hubs:
* (See the intel documentation on http://developer.intel.com.)
@@ -71,6 +63,8 @@
#define SPIBASE_BYT 0x54
#define SPIBASE_BYT_SZ 512
#define SPIBASE_BYT_EN BIT(1)
+#define BYT_BCR 0xfc
+#define BYT_BCR_WPD BIT(0)
#define SPIBASE_LPT 0x3800
#define SPIBASE_LPT_SZ 512
@@ -1091,12 +1085,57 @@
return ret;
}
+static bool lpc_ich_byt_set_writeable(void __iomem *base, void *data)
+{
+ u32 val;
+
+ val = readl(base + BYT_BCR);
+ if (!(val & BYT_BCR_WPD)) {
+ val |= BYT_BCR_WPD;
+ writel(val, base + BYT_BCR);
+ val = readl(base + BYT_BCR);
+ }
+
+ return val & BYT_BCR_WPD;
+}
+
+static bool lpc_ich_lpt_set_writeable(void __iomem *base, void *data)
+{
+ struct pci_dev *pdev = data;
+ u32 bcr;
+
+ pci_read_config_dword(pdev, BCR, &bcr);
+ if (!(bcr & BCR_WPD)) {
+ bcr |= BCR_WPD;
+ pci_write_config_dword(pdev, BCR, bcr);
+ pci_read_config_dword(pdev, BCR, &bcr);
+ }
+
+ return bcr & BCR_WPD;
+}
+
+static bool lpc_ich_bxt_set_writeable(void __iomem *base, void *data)
+{
+ unsigned int spi = PCI_DEVFN(13, 2);
+ struct pci_bus *bus = data;
+ u32 bcr;
+
+ pci_bus_read_config_dword(bus, spi, BCR, &bcr);
+ if (!(bcr & BCR_WPD)) {
+ bcr |= BCR_WPD;
+ pci_bus_write_config_dword(bus, spi, BCR, bcr);
+ pci_bus_read_config_dword(bus, spi, BCR, &bcr);
+ }
+
+ return bcr & BCR_WPD;
+}
+
static int lpc_ich_init_spi(struct pci_dev *dev)
{
struct lpc_ich_priv *priv = pci_get_drvdata(dev);
struct resource *res = &intel_spi_res[0];
struct intel_spi_boardinfo *info;
- u32 spi_base, rcba, bcr;
+ u32 spi_base, rcba;
info = devm_kzalloc(&dev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
@@ -1110,6 +1149,8 @@
if (spi_base & SPIBASE_BYT_EN) {
res->start = spi_base & ~(SPIBASE_BYT_SZ - 1);
res->end = res->start + SPIBASE_BYT_SZ - 1;
+
+ info->set_writeable = lpc_ich_byt_set_writeable;
}
break;
@@ -1120,8 +1161,8 @@
res->start = spi_base + SPIBASE_LPT;
res->end = res->start + SPIBASE_LPT_SZ - 1;
- pci_read_config_dword(dev, BCR, &bcr);
- info->writeable = !!(bcr & BCR_WPD);
+ info->set_writeable = lpc_ich_lpt_set_writeable;
+ info->data = dev;
}
break;
@@ -1142,8 +1183,8 @@
res->start = spi_base & 0xfffffff0;
res->end = res->start + SPIBASE_APL_SZ - 1;
- pci_bus_read_config_dword(bus, spi, BCR, &bcr);
- info->writeable = !!(bcr & BCR_WPD);
+ info->set_writeable = lpc_ich_bxt_set_writeable;
+ info->data = bus;
}
pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x1);
--
Gitblit v1.6.2