From ea08eeccae9297f7aabd2ef7f0c2517ac4549acc Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 20 Feb 2024 01:18:26 +0000
Subject: [PATCH] write in 30M
---
kernel/drivers/input/touchscreen/elants_i2c.c | 402 ++++++++++++++++++++++++++++++++++++++-------------------
1 files changed, 266 insertions(+), 136 deletions(-)
diff --git a/kernel/drivers/input/touchscreen/elants_i2c.c b/kernel/drivers/input/touchscreen/elants_i2c.c
index adfae2d..ca9cee5 100644
--- a/kernel/drivers/input/touchscreen/elants_i2c.c
+++ b/kernel/drivers/input/touchscreen/elants_i2c.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Elan Microelectronics touch panels with I2C interface
*
@@ -10,7 +11,6 @@
* Copyright (c) 2010-2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
* Copyright (c) 2010-2012 Ecole Nationale de l'Aviation Civile, France
*
- *
* This code is partly based on i2c-hid.c:
*
* Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
@@ -18,12 +18,8 @@
* Copyright (c) 2012 Red Hat, Inc
*/
-/*
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- */
+#include <linux/bits.h>
#include <linux/module.h>
#include <linux/input.h>
#include <linux/interrupt.h>
@@ -37,6 +33,7 @@
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
#include <linux/acpi.h>
#include <linux/of.h>
#include <linux/gpio/consumer.h>
@@ -65,8 +62,10 @@
#define CMD_HEADER_WRITE 0x54
#define CMD_HEADER_READ 0x53
#define CMD_HEADER_6B_READ 0x5B
+#define CMD_HEADER_ROM_READ 0x96
#define CMD_HEADER_RESP 0x52
#define CMD_HEADER_6B_RESP 0x9B
+#define CMD_HEADER_ROM_RESP 0x95
#define CMD_HEADER_HELLO 0x55
#define CMD_HEADER_REK 0x66
@@ -77,6 +76,7 @@
#define FW_POS_STATE 1
#define FW_POS_TOTAL 2
#define FW_POS_XY 3
+#define FW_POS_TOOL_TYPE 33
#define FW_POS_CHECKSUM 34
#define FW_POS_WIDTH 35
#define FW_POS_PRESSURE 45
@@ -91,6 +91,7 @@
/* FW read command, 0x53 0x?? 0x0, 0x01 */
#define E_ELAN_INFO_FW_VER 0x00
#define E_ELAN_INFO_BC_VER 0x10
+#define E_ELAN_INFO_REK 0xD0
#define E_ELAN_INFO_TEST_VER 0xE0
#define E_ELAN_INFO_FW_ID 0xF0
#define E_INFO_OSR 0xD6
@@ -107,6 +108,19 @@
#define ELAN_POWERON_DELAY_USEC 500
#define ELAN_RESET_DELAY_MSEC 20
+
+/* FW boot code version */
+#define BC_VER_H_BYTE_FOR_EKTH3900x1_I2C 0x72
+#define BC_VER_H_BYTE_FOR_EKTH3900x2_I2C 0x82
+#define BC_VER_H_BYTE_FOR_EKTH3900x3_I2C 0x92
+#define BC_VER_H_BYTE_FOR_EKTH5312x1_I2C 0x6D
+#define BC_VER_H_BYTE_FOR_EKTH5312x2_I2C 0x6E
+#define BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C 0x77
+#define BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C 0x78
+#define BC_VER_H_BYTE_FOR_EKTH5312x1_I2C_USB 0x67
+#define BC_VER_H_BYTE_FOR_EKTH5312x2_I2C_USB 0x68
+#define BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C_USB 0x74
+#define BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C_USB 0x75
enum elants_state {
ELAN_STATE_NORMAL,
@@ -134,10 +148,12 @@
u8 bc_version;
u8 iap_version;
u16 hw_version;
+ u8 major_res;
unsigned int x_res; /* resolution in units/mm */
unsigned int y_res;
unsigned int x_max;
unsigned int y_max;
+ struct touchscreen_properties prop;
enum elants_state state;
enum elants_iap_mode iap_mode;
@@ -148,10 +164,11 @@
u8 cmd_resp[HEADER_SIZE];
struct completion cmd_done;
- u8 buf[MAX_PACKET_SIZE];
-
bool wake_irq_enabled;
bool keep_power_in_suspend;
+
+ /* Must be last to be used for DMA operations */
+ u8 buf[MAX_PACKET_SIZE] ____cacheline_aligned;
};
static int elants_i2c_send(struct i2c_client *client,
@@ -190,7 +207,8 @@
static int elants_i2c_execute_command(struct i2c_client *client,
const u8 *cmd, size_t cmd_size,
- u8 *resp, size_t resp_size)
+ u8 *resp, size_t resp_size,
+ int retries, const char *cmd_name)
{
struct i2c_msg msgs[2];
int ret;
@@ -205,31 +223,60 @@
expected_response = CMD_HEADER_6B_RESP;
break;
+ case CMD_HEADER_ROM_READ:
+ expected_response = CMD_HEADER_ROM_RESP;
+ break;
+
default:
- dev_err(&client->dev, "%s: invalid command %*ph\n",
- __func__, (int)cmd_size, cmd);
+ dev_err(&client->dev, "(%s): invalid command: %*ph\n",
+ cmd_name, (int)cmd_size, cmd);
return -EINVAL;
}
- msgs[0].addr = client->addr;
- msgs[0].flags = client->flags & I2C_M_TEN;
- msgs[0].len = cmd_size;
- msgs[0].buf = (u8 *)cmd;
+ for (;;) {
+ msgs[0].addr = client->addr;
+ msgs[0].flags = client->flags & I2C_M_TEN;
+ msgs[0].len = cmd_size;
+ msgs[0].buf = (u8 *)cmd;
- msgs[1].addr = client->addr;
- msgs[1].flags = client->flags & I2C_M_TEN;
- msgs[1].flags |= I2C_M_RD;
- msgs[1].len = resp_size;
- msgs[1].buf = resp;
+ msgs[1].addr = client->addr;
+ msgs[1].flags = (client->flags & I2C_M_TEN) | I2C_M_RD;
+ msgs[1].flags |= I2C_M_RD;
+ msgs[1].len = resp_size;
+ msgs[1].buf = resp;
- ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (ret < 0)
- return ret;
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0) {
+ if (--retries > 0) {
+ dev_dbg(&client->dev,
+ "(%s) I2C transfer failed: %pe (retrying)\n",
+ cmd_name, ERR_PTR(ret));
+ continue;
+ }
- if (ret != ARRAY_SIZE(msgs) || resp[FW_HDR_TYPE] != expected_response)
- return -EIO;
+ dev_err(&client->dev,
+ "(%s) I2C transfer failed: %pe\n",
+ cmd_name, ERR_PTR(ret));
+ return ret;
+ }
- return 0;
+ if (ret != ARRAY_SIZE(msgs) ||
+ resp[FW_HDR_TYPE] != expected_response) {
+ if (--retries > 0) {
+ dev_dbg(&client->dev,
+ "(%s) unexpected response: %*ph (retrying)\n",
+ cmd_name, ret, resp);
+ continue;
+ }
+
+ dev_err(&client->dev,
+ "(%s) unexpected response: %*ph\n",
+ cmd_name, ret, resp);
+ return -EIO;
+ }
+
+ return 0;
+ }
}
static int elants_i2c_calibrate(struct elants_data *ts)
@@ -302,27 +349,21 @@
static int elants_i2c_query_hw_version(struct elants_data *ts)
{
struct i2c_client *client = ts->client;
- int error, retry_cnt;
+ int retry_cnt = MAX_RETRIES;
const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_ID, 0x00, 0x01 };
u8 resp[HEADER_SIZE];
+ int error;
- for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
+ while (retry_cnt--) {
error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
- resp, sizeof(resp));
- if (!error) {
- ts->hw_version = elants_i2c_parse_version(resp);
- if (ts->hw_version != 0xffff)
- return 0;
- }
+ resp, sizeof(resp), 1,
+ "read fw id");
+ if (error)
+ return error;
- dev_dbg(&client->dev, "read fw id error=%d, buf=%*phC\n",
- error, (int)sizeof(resp), resp);
- }
-
- if (error) {
- dev_err(&client->dev,
- "Failed to read fw id: %d\n", error);
- return error;
+ ts->hw_version = elants_i2c_parse_version(resp);
+ if (ts->hw_version != 0xffff)
+ return 0;
}
dev_err(&client->dev, "Invalid fw id: %#04x\n", ts->hw_version);
@@ -333,26 +374,27 @@
static int elants_i2c_query_fw_version(struct elants_data *ts)
{
struct i2c_client *client = ts->client;
- int error, retry_cnt;
+ int retry_cnt = MAX_RETRIES;
const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_VER, 0x00, 0x01 };
u8 resp[HEADER_SIZE];
+ int error;
- for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
+ while (retry_cnt--) {
error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
- resp, sizeof(resp));
- if (!error) {
- ts->fw_version = elants_i2c_parse_version(resp);
- if (ts->fw_version != 0x0000 &&
- ts->fw_version != 0xffff)
- return 0;
- }
+ resp, sizeof(resp), 1,
+ "read fw version");
+ if (error)
+ return error;
- dev_dbg(&client->dev, "read fw version error=%d, buf=%*phC\n",
- error, (int)sizeof(resp), resp);
+ ts->fw_version = elants_i2c_parse_version(resp);
+ if (ts->fw_version != 0x0000 && ts->fw_version != 0xffff)
+ return 0;
+
+ dev_dbg(&client->dev, "(read fw version) resp %*phC\n",
+ (int)sizeof(resp), resp);
}
- dev_err(&client->dev,
- "Failed to read fw version or fw version is invalid\n");
+ dev_err(&client->dev, "Invalid fw ver: %#04x\n", ts->fw_version);
return -EINVAL;
}
@@ -360,30 +402,24 @@
static int elants_i2c_query_test_version(struct elants_data *ts)
{
struct i2c_client *client = ts->client;
- int error, retry_cnt;
+ int error;
u16 version;
const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_TEST_VER, 0x00, 0x01 };
u8 resp[HEADER_SIZE];
- for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
- error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
- resp, sizeof(resp));
- if (!error) {
- version = elants_i2c_parse_version(resp);
- ts->test_version = version >> 8;
- ts->solution_version = version & 0xff;
-
- return 0;
- }
-
- dev_dbg(&client->dev,
- "read test version error rc=%d, buf=%*phC\n",
- error, (int)sizeof(resp), resp);
+ error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+ resp, sizeof(resp), MAX_RETRIES,
+ "read test version");
+ if (error) {
+ dev_err(&client->dev, "Failed to read test version\n");
+ return error;
}
- dev_err(&client->dev, "Failed to read test version\n");
+ version = elants_i2c_parse_version(resp);
+ ts->test_version = version >> 8;
+ ts->solution_version = version & 0xff;
- return -EINVAL;
+ return 0;
}
static int elants_i2c_query_bc_version(struct elants_data *ts)
@@ -395,13 +431,10 @@
int error;
error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
- resp, sizeof(resp));
- if (error) {
- dev_err(&client->dev,
- "read BC version error=%d, buf=%*phC\n",
- error, (int)sizeof(resp), resp);
+ resp, sizeof(resp), 1,
+ "read BC version");
+ if (error)
return error;
- }
version = elants_i2c_parse_version(resp);
ts->bc_version = version >> 8;
@@ -433,49 +466,43 @@
error = elants_i2c_execute_command(client,
get_resolution_cmd,
sizeof(get_resolution_cmd),
- resp, sizeof(resp));
- if (error) {
- dev_err(&client->dev, "get resolution command failed: %d\n",
- error);
+ resp, sizeof(resp), 1,
+ "get resolution");
+ if (error)
return error;
- }
rows = resp[2] + resp[6] + resp[10];
cols = resp[3] + resp[7] + resp[11];
+ /* Get report resolution value of ABS_MT_TOUCH_MAJOR */
+ ts->major_res = resp[16];
+
/* Process mm_to_pixel information */
error = elants_i2c_execute_command(client,
get_osr_cmd, sizeof(get_osr_cmd),
- resp, sizeof(resp));
- if (error) {
- dev_err(&client->dev, "get osr command failed: %d\n",
- error);
+ resp, sizeof(resp), 1, "get osr");
+ if (error)
return error;
- }
osr = resp[3];
error = elants_i2c_execute_command(client,
get_physical_scan_cmd,
sizeof(get_physical_scan_cmd),
- resp, sizeof(resp));
- if (error) {
- dev_err(&client->dev, "get physical scan command failed: %d\n",
- error);
+ resp, sizeof(resp), 1,
+ "get physical scan");
+ if (error)
return error;
- }
phy_x = get_unaligned_be16(&resp[2]);
error = elants_i2c_execute_command(client,
get_physical_drive_cmd,
sizeof(get_physical_drive_cmd),
- resp, sizeof(resp));
- if (error) {
- dev_err(&client->dev, "get physical drive command failed: %d\n",
- error);
+ resp, sizeof(resp), 1,
+ "get physical drive");
+ if (error)
return error;
- }
phy_y = get_unaligned_be16(&resp[2]);
@@ -561,6 +588,8 @@
/* hw version is available even if device in recovery state */
error2 = elants_i2c_query_hw_version(ts);
+ if (!error2)
+ error2 = elants_i2c_query_bc_version(ts);
if (!error)
error = error2;
@@ -568,8 +597,6 @@
error = elants_i2c_query_fw_version(ts);
if (!error)
error = elants_i2c_query_test_version(ts);
- if (!error)
- error = elants_i2c_query_bc_version(ts);
if (!error)
error = elants_i2c_query_ts_info(ts);
@@ -618,39 +645,124 @@
return error;
}
+static int elants_i2c_validate_remark_id(struct elants_data *ts,
+ const struct firmware *fw)
+{
+ struct i2c_client *client = ts->client;
+ int error;
+ const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21 };
+ u8 resp[6] = { 0 };
+ u16 ts_remark_id = 0;
+ u16 fw_remark_id = 0;
+
+ /* Compare TS Remark ID and FW Remark ID */
+ error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+ resp, sizeof(resp),
+ 1, "read Remark ID");
+ if (error)
+ return error;
+
+ ts_remark_id = get_unaligned_be16(&resp[3]);
+
+ fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]);
+
+ if (fw_remark_id != ts_remark_id) {
+ dev_err(&client->dev,
+ "Remark ID Mismatched: ts_remark_id=0x%04x, fw_remark_id=0x%04x.\n",
+ ts_remark_id, fw_remark_id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static bool elants_i2c_should_check_remark_id(struct elants_data *ts)
+{
+ struct i2c_client *client = ts->client;
+ const u8 bootcode_version = ts->iap_version;
+ bool check;
+
+ /* I2C eKTH3900 and eKTH5312 are NOT support Remark ID */
+ if ((bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x1_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x2_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x3_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x1_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x2_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x1_I2C_USB) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x2_I2C_USB) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C_USB) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C_USB)) {
+ dev_dbg(&client->dev,
+ "eKTH3900/eKTH5312(0x%02x) are not support remark id\n",
+ bootcode_version);
+ check = false;
+ } else if (bootcode_version >= 0x60) {
+ check = true;
+ } else {
+ check = false;
+ }
+
+ return check;
+}
+
static int elants_i2c_do_update_firmware(struct i2c_client *client,
const struct firmware *fw,
bool force)
{
+ struct elants_data *ts = i2c_get_clientdata(client);
const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
- const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01};
+ const u8 close_idle[] = { 0x54, 0x2c, 0x01, 0x01 };
u8 buf[HEADER_SIZE];
u16 send_id;
int page, n_fw_pages;
int error;
+ bool check_remark_id = elants_i2c_should_check_remark_id(ts);
/* Recovery mode detection! */
if (force) {
dev_dbg(&client->dev, "Recovery mode procedure\n");
+
+ if (check_remark_id) {
+ error = elants_i2c_validate_remark_id(ts, fw);
+ if (error)
+ return error;
+ }
+
error = elants_i2c_send(client, enter_iap2, sizeof(enter_iap2));
+ if (error) {
+ dev_err(&client->dev, "failed to enter IAP mode: %d\n",
+ error);
+ return error;
+ }
} else {
/* Start IAP Procedure */
dev_dbg(&client->dev, "Normal IAP procedure\n");
+
/* Close idle mode */
error = elants_i2c_send(client, close_idle, sizeof(close_idle));
if (error)
dev_err(&client->dev, "Failed close idle: %d\n", error);
msleep(60);
+
elants_i2c_sw_reset(client);
msleep(20);
- error = elants_i2c_send(client, enter_iap, sizeof(enter_iap));
- }
- if (error) {
- dev_err(&client->dev, "failed to enter IAP mode: %d\n", error);
- return error;
+ if (check_remark_id) {
+ error = elants_i2c_validate_remark_id(ts, fw);
+ if (error)
+ return error;
+ }
+
+ error = elants_i2c_send(client, enter_iap, sizeof(enter_iap));
+ if (error) {
+ dev_err(&client->dev, "failed to enter IAP mode: %d\n",
+ error);
+ return error;
+ }
}
msleep(20);
@@ -786,6 +898,7 @@
{
struct input_dev *input = ts->input;
unsigned int n_fingers;
+ unsigned int tool_type;
u16 finger_state;
int i;
@@ -795,6 +908,10 @@
dev_dbg(&ts->client->dev,
"n_fingers: %u, state: %04x\n", n_fingers, finger_state);
+
+ /* Note: all fingers have the same tool type */
+ tool_type = buf[FW_POS_TOOL_TYPE] & BIT(0) ?
+ MT_TOOL_FINGER : MT_TOOL_PALM;
for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) {
if (finger_state & 1) {
@@ -811,9 +928,8 @@
i, x, y, p, w);
input_mt_slot(input, i);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
- input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
- input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
+ input_mt_report_slot_state(input, tool_type, true);
+ touchscreen_report_pos(input, &ts->prop, x, y, true);
input_event(input, EV_ABS, ABS_MT_PRESSURE, p);
input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, w);
@@ -864,7 +980,7 @@
int i;
int len;
- len = i2c_master_recv(client, ts->buf, sizeof(ts->buf));
+ len = i2c_master_recv_dmasafe(client, ts->buf, sizeof(ts->buf));
if (len < 0) {
dev_err(&client->dev, "%s: failed to read data: %d\n",
__func__, len);
@@ -888,7 +1004,7 @@
break;
ts->state = ELAN_STATE_NORMAL;
- /* fall through */
+ fallthrough;
case ELAN_STATE_NORMAL:
@@ -954,7 +1070,7 @@
*/
static ssize_t calibrate_store(struct device *dev,
struct device_attribute *attr,
- const char *buf, size_t count)
+ const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct elants_data *ts = i2c_get_clientdata(client);
@@ -1000,8 +1116,28 @@
"Normal" : "Recovery");
}
+static ssize_t show_calibration_count(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_REK, 0x00, 0x01 };
+ u8 resp[HEADER_SIZE];
+ u16 rek_count;
+ int error;
+
+ error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+ resp, sizeof(resp), 1,
+ "read ReK status");
+ if (error)
+ return sprintf(buf, "%d\n", error);
+
+ rek_count = get_unaligned_be16(&resp[2]);
+ return sprintf(buf, "0x%04x\n", rek_count);
+}
+
static DEVICE_ATTR_WO(calibrate);
static DEVICE_ATTR(iap_mode, S_IRUGO, show_iap_mode, NULL);
+static DEVICE_ATTR(calibration_count, S_IRUGO, show_calibration_count, NULL);
static DEVICE_ATTR(update_fw, S_IWUSR, NULL, write_update_fw);
struct elants_version_attribute {
@@ -1057,6 +1193,7 @@
&dev_attr_calibrate.attr,
&dev_attr_update_fw.attr,
&dev_attr_iap_mode.attr,
+ &dev_attr_calibration_count.attr,
&elants_ver_attr_fw_version.dattr.attr,
&elants_ver_attr_hw_version.dattr.attr,
@@ -1082,14 +1219,12 @@
if (IS_ERR_OR_NULL(ts->reset_gpio))
return 0;
- gpiod_set_value_cansleep(ts->reset_gpio, 1);
-
error = regulator_enable(ts->vcc33);
if (error) {
dev_err(&ts->client->dev,
"failed to enable vcc33 regulator: %d\n",
error);
- goto release_reset_gpio;
+ return error;
}
error = regulator_enable(ts->vccio);
@@ -1098,7 +1233,7 @@
"failed to enable vccio regulator: %d\n",
error);
regulator_disable(ts->vcc33);
- goto release_reset_gpio;
+ return error;
}
/*
@@ -1107,7 +1242,6 @@
*/
udelay(ELAN_POWERON_DELAY_USEC);
-release_reset_gpio:
gpiod_set_value_cansleep(ts->reset_gpio, 0);
if (error)
return error;
@@ -1215,7 +1349,7 @@
return error;
}
- ts->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
+ ts->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ts->reset_gpio)) {
error = PTR_ERR(ts->reset_gpio);
@@ -1266,18 +1400,21 @@
ts->input->name = "Elan Touchscreen";
ts->input->id.bustype = BUS_I2C;
- __set_bit(BTN_TOUCH, ts->input->keybit);
- __set_bit(EV_ABS, ts->input->evbit);
- __set_bit(EV_KEY, ts->input->evbit);
-
- /* Single touch input params setup */
- input_set_abs_params(ts->input, ABS_X, 0, ts->x_max, 0, 0);
- input_set_abs_params(ts->input, ABS_Y, 0, ts->y_max, 0, 0);
- input_set_abs_params(ts->input, ABS_PRESSURE, 0, 255, 0, 0);
- input_abs_set_res(ts->input, ABS_X, ts->x_res);
- input_abs_set_res(ts->input, ABS_Y, ts->y_res);
-
/* Multitouch input params setup */
+
+ input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->x_max, 0, 0);
+ input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0);
+ input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+ input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
+ input_set_abs_params(ts->input, ABS_MT_TOOL_TYPE,
+ 0, MT_TOOL_PALM, 0, 0);
+ input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
+ input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
+ if (ts->major_res > 0)
+ input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, ts->major_res);
+
+ touchscreen_parse_properties(ts->input, true, &ts->prop);
+
error = input_mt_init_slots(ts->input, MAX_CONTACT_NUM,
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
if (error) {
@@ -1285,13 +1422,6 @@
"failed to initialize MT slots: %d\n", error);
return error;
}
-
- input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->x_max, 0, 0);
- input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0);
- input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
- input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
- input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
- input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
error = input_register_device(ts->input);
if (error) {
--
Gitblit v1.6.2