From e636c8d336489bf3eed5878299e6cc045bbad077 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 20 Feb 2024 01:17:29 +0000
Subject: [PATCH] debug lk

---
 kernel/tools/testing/ktest/sample.conf |   69 ++++++++++++++++++++++++++++------
 1 files changed, 56 insertions(+), 13 deletions(-)

diff --git a/kernel/tools/testing/ktest/sample.conf b/kernel/tools/testing/ktest/sample.conf
index 6ca6ca0..65957a9 100644
--- a/kernel/tools/testing/ktest/sample.conf
+++ b/kernel/tools/testing/ktest/sample.conf
@@ -10,7 +10,7 @@
 #
 
 # Options set in the beginning of the file are considered to be
-# default options. These options can be overriden by test specific
+# default options. These options can be overridden by test specific
 # options, with the following exceptions:
 #
 #  LOG_FILE
@@ -204,7 +204,7 @@
 #
 # This config file can also contain "config variables".
 # These are assigned with ":=" instead of the ktest option
-# assigment "=".
+# assignment "=".
 #
 # The difference between ktest options and config variables
 # is that config variables can be used multiple times,
@@ -263,7 +263,7 @@
 #### Using options in other options ####
 #
 # Options that are defined in the config file may also be used
-# by other options. All options are evaulated at time of
+# by other options. All options are evaluated at time of
 # use (except that config variables are evaluated at config
 # processing time).
 #
@@ -349,13 +349,13 @@
 # option to boot to with GRUB_REBOOT
 #GRUB_FILE = /boot/grub2/grub.cfg
 
-# The tool for REBOOT_TYPE = grub2 to set the next reboot kernel
+# The tool for REBOOT_TYPE = grub2 or grub2bls to set the next reboot kernel
 # to boot into (one shot mode).
 # (default grub2_reboot)
 #GRUB_REBOOT = grub2_reboot
 
 # The grub title name for the test kernel to boot
-# (Only mandatory if REBOOT_TYPE = grub or grub2)
+# (Only mandatory if REBOOT_TYPE = grub or grub2 or grub2bls)
 #
 # Note, ktest.pl will not update the grub menu.lst, you need to
 # manually add an option for the test. ktest.pl will search
@@ -373,6 +373,10 @@
 # for: menuentry 'Test Kernel'
 # do a: GRUB_MENU = 'Test Kernel'
 # For customizing, add your entry in /etc/grub.d/40_custom.
+#
+# For grub2bls, a search of "title"s are done. The menu is found
+# by searching for the contents of GRUB_MENU in the line that starts
+# with "title".
 #
 #GRUB_MENU = Test Kernel
 
@@ -438,6 +442,19 @@
 # Users can cancel the test by Ctrl^C
 # (default 0)
 #EMAIL_WHEN_CANCELED = 1
+#
+# If a test ends with an error and EMAIL_ON_ERROR is set as well
+# as a LOG_FILE is defined, then the log of the failing test will
+# be included in the email that is sent.
+# It is possible that the log may be very large, in which case,
+# only the last amount of the log should be sent. To limit how
+# much of the log is sent, set MAIL_MAX_SIZE. This will be the
+# size in bytes of the last portion of the log of the failed
+# test file. That is, if this is set to 100000, then only the
+# last 100 thousand bytes of the log file will be included in
+# the email.
+# (default undef)
+#MAIL_MAX_SIZE = 1000000
 
 # Start a test setup. If you leave this off, all options
 # will be default and the test will run once.
@@ -479,6 +496,11 @@
 # default (undefined)
 #POST_KTEST = ${SSH} ~/dismantle_test
 
+# If you want to remove the kernel entry in Boot Loader Specification (BLS)
+# environment, use kernel-install command.
+# Here's the example:
+#POST_KTEST = ssh root@Test "/usr/bin/kernel-install remove $KERNEL_VERSION"
+
 # The default test type (default test)
 # The test types may be:
 #   build   - only build the kernel, do nothing else
@@ -496,7 +518,7 @@
 #TEST = ssh user@machine /root/run_test
 
 # The build type is any make config type or special command
-#  (default randconfig)
+#  (default oldconfig)
 #   nobuild - skip the clean and build step
 #   useconfig:/path/to/config - use the given config and run
 #              oldconfig on it.
@@ -530,6 +552,11 @@
 # or on some systems:
 #POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
 
+# If you want to add the kernel entry in Boot Loader Specification (BLS)
+# environment, use kernel-install command.
+# Here's the example:
+#POST_INSTALL = ssh root@Test "/usr/bin/kernel-install add $KERNEL_VERSION /boot/vmlinuz-$KERNEL_VERSION"
+
 # If for some reason you just want to boot the kernel and you do not
 # want the test to install anything new. For example, you may just want
 # to boot test the same kernel over and over and do not want to go through
@@ -542,6 +569,11 @@
 #
 # default (undefined)
 #PRE_TEST = ${SSH} reboot_to_special_kernel
+
+# To kill the entire test if PRE_TEST is defined but fails set this
+# to 1.
+# (default 0)
+#PRE_TEST_DIE = 1
 
 # If there is a command you want to run after the individual test case
 # completes, then you can set this option.
@@ -592,6 +624,8 @@
 #
 # For REBOOT_TYPE = grub2, you must define both GRUB_MENU and
 # GRUB_FILE.
+#
+# For REBOOT_TYPE = grub2bls, you must define GRUB_MENU.
 #
 # For REBOOT_TYPE = syslinux, you must define SYSLINUX_LABEL, and
 # perhaps modify SYSLINUX (default extlinux) and SYSLINUX_PATH
@@ -691,7 +725,7 @@
 
 # Line to define a successful boot up in console output.
 # This is what the line contains, not the entire line. If you need
-# the entire line to match, then use regural expression syntax like:
+# the entire line to match, then use regular expression syntax like:
 #  (do not add any quotes around it)
 #
 #  SUCCESS_LINE = ^MyBox Login:$
@@ -775,6 +809,11 @@
 # is issued instead of a reboot.
 # CONNECT_TIMEOUT = 25
 
+# The timeout in seconds for how long to wait for any running command
+# to timeout. If not defined, it will let it go indefinitely.
+# (default undefined)
+#RUN_TIMEOUT = 600
+
 # In between tests, a reboot of the box may occur, and this
 # is the time to wait for the console after it stops producing
 # output. Some machines may not produce a large lag on reboot
@@ -823,7 +862,7 @@
 # (ignored if POWEROFF_ON_SUCCESS is set)
 #REBOOT_ON_SUCCESS = 1
 
-# In case there are isses with rebooting, you can specify this
+# In case there are issues with rebooting, you can specify this
 # to always powercycle after this amount of time after calling
 # reboot.
 # Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just
@@ -832,7 +871,7 @@
 # (default undefined)
 #POWERCYCLE_AFTER_REBOOT = 5
 
-# In case there's isses with halting, you can specify this
+# In case there's issues with halting, you can specify this
 # to always poweroff after this amount of time after calling
 # halt.
 # Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just
@@ -886,6 +925,10 @@
 # (default ssh $SSH_USER@$MACHINE reboot)
 # The variables SSH_USER and MACHINE are defined.
 #REBOOT = ssh $SSH_USER@$MACHINE reboot
+
+# The return code of REBOOT
+# (default 255)
+#REBOOT_RETURN_CODE = 255
 
 # The way triple faults are detected is by testing the kernel
 # banner. If the kernel banner for the kernel we are testing is
@@ -952,7 +995,7 @@
 #
 #  PATCHCHECK_START is required and is the first patch to
 #   test (the SHA1 of the commit). You may also specify anything
-#   that git checkout allows (branch name, tage, HEAD~3).
+#   that git checkout allows (branch name, tag, HEAD~3).
 #
 #  PATCHCHECK_END is the last patch to check (default HEAD)
 #
@@ -974,7 +1017,7 @@
 #     IGNORE_WARNINGS is set for the given commit's sha1
 #
 #   IGNORE_WARNINGS can be used to disable the failure of patchcheck
-#     on a particuler commit (SHA1). You can add more than one commit
+#     on a particular commit (SHA1). You can add more than one commit
 #     by adding a list of SHA1s that are space delimited.
 #
 #   If BUILD_NOCLEAN is set, then make mrproper will not be run on
@@ -1073,7 +1116,7 @@
 #   whatever reason. (Can't reboot, want to inspect each iteration)
 #   Doing a BISECT_MANUAL will have the test wait for you to
 #   tell it if the test passed or failed after each iteration.
-#   This is basicall the same as running git bisect yourself
+#   This is basically the same as running git bisect yourself
 #   but ktest will rebuild and install the kernel for you.
 #
 # BISECT_CHECK = 1 (optional, default 0)
@@ -1219,7 +1262,7 @@
 #
 # CONFIG_BISECT_EXEC (optional)
 #  The config bisect is a separate program that comes with ktest.pl.
-#  By befault, it will look for:
+#  By default, it will look for:
 #    `pwd`/config-bisect.pl # the location ktest.pl was executed from.
 #  If it does not find it there, it will look for:
 #    `dirname <ktest.pl>`/config-bisect.pl # The directory that holds ktest.pl

--
Gitblit v1.6.2