From e636c8d336489bf3eed5878299e6cc045bbad077 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 20 Feb 2024 01:17:29 +0000
Subject: [PATCH] debug lk
---
kernel/drivers/usb/serial/mos7840.c | 858 ++++++++------------------------------------------------
1 files changed, 129 insertions(+), 729 deletions(-)
diff --git a/kernel/drivers/usb/serial/mos7840.c b/kernel/drivers/usb/serial/mos7840.c
index 3e624b6..48a9a04 100644
--- a/kernel/drivers/usb/serial/mos7840.c
+++ b/kernel/drivers/usb/serial/mos7840.c
@@ -89,16 +89,10 @@
/* For higher baud Rates use TIOCEXBAUD */
#define TIOCEXBAUD 0x5462
-/* vendor id and device id defines */
-
-/* The native mos7840/7820 component */
-#define USB_VENDOR_ID_MOSCHIP 0x9710
-#define MOSCHIP_DEVICE_ID_7840 0x7840
-#define MOSCHIP_DEVICE_ID_7820 0x7820
-#define MOSCHIP_DEVICE_ID_7810 0x7810
-/* The native component can have its vendor/device id's overridden
- * in vendor-specific implementations. Such devices can be handled
- * by making a change here, in id_table.
+/*
+ * Vendor id and device id defines
+ *
+ * NOTE: Do not add new defines, add entries directly to the id_table instead.
*/
#define USB_VENDOR_ID_BANDB 0x0856
#define BANDB_DEVICE_ID_USO9ML2_2 0xAC22
@@ -113,18 +107,6 @@
#define BANDB_DEVICE_ID_USOPTL4_2P 0xBC02
#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
#define BANDB_DEVICE_ID_USOPTL4_4P 0xBC03
-
-/* This driver also supports
- * ATEN UC2324 device using Moschip MCS7840
- * ATEN UC2322 device using Moschip MCS7820
- * MOXA UPort 2210 device using Moschip MCS7820
- */
-#define USB_VENDOR_ID_ATENINTL 0x0557
-#define ATENINTL_DEVICE_ID_UC2324 0x2011
-#define ATENINTL_DEVICE_ID_UC2322 0x7820
-
-#define USB_VENDOR_ID_MOXA 0x110a
-#define MOXA_DEVICE_ID_2210 0x2210
/* Interrupt Routine Defines */
@@ -173,29 +155,36 @@
#define LED_OFF_MS 500
enum mos7840_flag {
- MOS7840_FLAG_CTRL_BUSY,
MOS7840_FLAG_LED_BUSY,
};
+#define MCS_PORT_MASK GENMASK(2, 0)
+#define MCS_PORTS(nr) ((nr) & MCS_PORT_MASK)
+#define MCS_LED BIT(3)
+
+#define MCS_DEVICE(vid, pid, flags) \
+ USB_DEVICE((vid), (pid)), .driver_info = (flags)
+
static const struct usb_device_id id_table[] = {
- {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
- {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
- {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)},
- {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
- {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
- {USB_DEVICE(USB_VENDOR_ID_MOXA, MOXA_DEVICE_ID_2210)},
+ { MCS_DEVICE(0x0557, 0x2011, MCS_PORTS(4)) }, /* ATEN UC2324 */
+ { MCS_DEVICE(0x0557, 0x7820, MCS_PORTS(2)) }, /* ATEN UC2322 */
+ { MCS_DEVICE(0x110a, 0x2210, MCS_PORTS(2)) }, /* Moxa UPort 2210 */
+ { MCS_DEVICE(0x9710, 0x7810, MCS_PORTS(1) | MCS_LED) }, /* ASIX MCS7810 */
+ { MCS_DEVICE(0x9710, 0x7820, MCS_PORTS(2)) }, /* MosChip MCS7820 */
+ { MCS_DEVICE(0x9710, 0x7840, MCS_PORTS(4)) }, /* MosChip MCS7840 */
+ { MCS_DEVICE(0x9710, 0x7843, MCS_PORTS(3)) }, /* ASIX MCS7840 3 port */
+ { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2) },
+ { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P) },
+ { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4) },
+ { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P) },
+ { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2) },
+ { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4) },
+ { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2) },
+ { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4) },
+ { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2) },
+ { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P) },
+ { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4) },
+ { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P) },
{} /* terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -207,19 +196,12 @@
struct urb *read_urb; /* read URB for this port */
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
- char open;
- char open_ports;
struct usb_serial_port *port; /* loop back to the owner of this object */
/* Offsets */
__u8 SpRegOffset;
__u8 ControlRegOffset;
__u8 DcrRegOffset;
- /* for processing control URBS in interrupt context */
- struct urb *control_urb;
- struct usb_ctrlrequest *dr;
- char *ctrl_buf;
- int MsrLsr;
spinlock_t pool_lock;
struct urb *write_urb_pool[NUM_URBS];
@@ -301,15 +283,10 @@
val = val & 0x00ff;
/* For the UART control registers, the application number need
to be Or'ed */
- if (port->serial->num_ports == 4) {
+ if (port->serial->num_ports == 2 && port->port_number != 0)
+ val |= ((__u16)port->port_number + 2) << 8;
+ else
val |= ((__u16)port->port_number + 1) << 8;
- } else {
- if (port->port_number == 0) {
- val |= ((__u16)port->port_number + 1) << 8;
- } else {
- val |= ((__u16)port->port_number + 2) << 8;
- }
- }
dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
MCS_WR_RTYPE, val, reg, NULL, 0,
@@ -335,15 +312,10 @@
return -ENOMEM;
/* Wval is same as application number */
- if (port->serial->num_ports == 4) {
+ if (port->serial->num_ports == 2 && port->port_number != 0)
+ Wval = ((__u16)port->port_number + 2) << 8;
+ else
Wval = ((__u16)port->port_number + 1) << 8;
- } else {
- if (port->port_number == 0) {
- Wval = ((__u16)port->port_number + 1) << 8;
- } else {
- Wval = ((__u16)port->port_number + 2) << 8;
- }
- }
dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval);
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
@@ -371,149 +343,10 @@
/************************************************************************/
/************************************************************************/
-/* I N T E R F A C E F U N C T I O N S */
-/* I N T E R F A C E F U N C T I O N S */
-/************************************************************************/
-/************************************************************************/
-
-static inline void mos7840_set_port_private(struct usb_serial_port *port,
- struct moschip_port *data)
-{
- usb_set_serial_port_data(port, (void *)data);
-}
-
-static inline struct moschip_port *mos7840_get_port_private(struct
- usb_serial_port
- *port)
-{
- return (struct moschip_port *)usb_get_serial_port_data(port);
-}
-
-static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
-{
- struct moschip_port *mos7840_port;
- struct async_icount *icount;
- mos7840_port = port;
- if (new_msr &
- (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI |
- MOS_MSR_DELTA_CD)) {
- icount = &mos7840_port->port->icount;
-
- /* update input line counters */
- if (new_msr & MOS_MSR_DELTA_CTS)
- icount->cts++;
- if (new_msr & MOS_MSR_DELTA_DSR)
- icount->dsr++;
- if (new_msr & MOS_MSR_DELTA_CD)
- icount->dcd++;
- if (new_msr & MOS_MSR_DELTA_RI)
- icount->rng++;
-
- wake_up_interruptible(&port->port->port.delta_msr_wait);
- }
-}
-
-static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
-{
- struct async_icount *icount;
-
- if (new_lsr & SERIAL_LSR_BI) {
- /*
- * Parity and Framing errors only count if they
- * occur exclusive of a break being
- * received.
- */
- new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
- }
-
- /* update input line counters */
- icount = &port->port->icount;
- if (new_lsr & SERIAL_LSR_BI)
- icount->brk++;
- if (new_lsr & SERIAL_LSR_OE)
- icount->overrun++;
- if (new_lsr & SERIAL_LSR_PE)
- icount->parity++;
- if (new_lsr & SERIAL_LSR_FE)
- icount->frame++;
-}
-
-/************************************************************************/
-/************************************************************************/
/* U S B C A L L B A C K F U N C T I O N S */
/* U S B C A L L B A C K F U N C T I O N S */
/************************************************************************/
/************************************************************************/
-
-static void mos7840_control_callback(struct urb *urb)
-{
- unsigned char *data;
- struct moschip_port *mos7840_port;
- struct device *dev = &urb->dev->dev;
- __u8 regval = 0x0;
- int status = urb->status;
-
- mos7840_port = urb->context;
-
- switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status);
- goto out;
- default:
- dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
- goto out;
- }
-
- dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
- if (urb->actual_length < 1)
- goto out;
-
- dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__,
- mos7840_port->MsrLsr, mos7840_port->port_num);
- data = urb->transfer_buffer;
- regval = (__u8) data[0];
- dev_dbg(dev, "%s data is %x\n", __func__, regval);
- if (mos7840_port->MsrLsr == 0)
- mos7840_handle_new_msr(mos7840_port, regval);
- else if (mos7840_port->MsrLsr == 1)
- mos7840_handle_new_lsr(mos7840_port, regval);
-out:
- clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mos7840_port->flags);
-}
-
-static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
- __u16 *val)
-{
- struct usb_device *dev = mcs->port->serial->dev;
- struct usb_ctrlrequest *dr = mcs->dr;
- unsigned char *buffer = mcs->ctrl_buf;
- int ret;
-
- if (test_and_set_bit_lock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags))
- return -EBUSY;
-
- dr->bRequestType = MCS_RD_RTYPE;
- dr->bRequest = MCS_RDREQ;
- dr->wValue = cpu_to_le16(Wval); /* 0 */
- dr->wIndex = cpu_to_le16(reg);
- dr->wLength = cpu_to_le16(2);
-
- usb_fill_control_urb(mcs->control_urb, dev, usb_rcvctrlpipe(dev, 0),
- (unsigned char *)dr, buffer, 2,
- mos7840_control_callback, mcs);
- mcs->control_urb->transfer_buffer_length = 2;
- ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
- if (ret)
- clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags);
-
- return ret;
-}
static void mos7840_set_led_callback(struct urb *urb)
{
@@ -591,147 +424,6 @@
}
/*****************************************************************************
- * mos7840_interrupt_callback
- * this is the callback function for when we have received data on the
- * interrupt endpoint.
- *****************************************************************************/
-
-static void mos7840_interrupt_callback(struct urb *urb)
-{
- int result;
- int length;
- struct moschip_port *mos7840_port;
- struct usb_serial *serial;
- __u16 Data;
- unsigned char *data;
- __u8 sp[5], st;
- int i, rv = 0;
- __u16 wval, wreg = 0;
- int status = urb->status;
-
- switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
- __func__, status);
- return;
- default:
- dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n",
- __func__, status);
- goto exit;
- }
-
- length = urb->actual_length;
- data = urb->transfer_buffer;
-
- serial = urb->context;
-
- /* Moschip get 5 bytes
- * Byte 1 IIR Port 1 (port.number is 0)
- * Byte 2 IIR Port 2 (port.number is 1)
- * Byte 3 IIR Port 3 (port.number is 2)
- * Byte 4 IIR Port 4 (port.number is 3)
- * Byte 5 FIFO status for both */
-
- if (length > 5) {
- dev_dbg(&urb->dev->dev, "%s", "Wrong data !!!\n");
- return;
- }
-
- sp[0] = (__u8) data[0];
- sp[1] = (__u8) data[1];
- sp[2] = (__u8) data[2];
- sp[3] = (__u8) data[3];
- st = (__u8) data[4];
-
- for (i = 0; i < serial->num_ports; i++) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
- wval = ((__u16)serial->port[i]->port_number + 1) << 8;
- if (mos7840_port->open) {
- if (sp[i] & 0x01) {
- dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i);
- } else {
- switch (sp[i] & 0x0f) {
- case SERIAL_IIR_RLS:
- dev_dbg(&urb->dev->dev, "Serial Port %d: Receiver status error or \n", i);
- dev_dbg(&urb->dev->dev, "address bit detected in 9-bit mode\n");
- mos7840_port->MsrLsr = 1;
- wreg = LINE_STATUS_REGISTER;
- break;
- case SERIAL_IIR_MS:
- dev_dbg(&urb->dev->dev, "Serial Port %d: Modem status change\n", i);
- mos7840_port->MsrLsr = 0;
- wreg = MODEM_STATUS_REGISTER;
- break;
- }
- rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
- }
- }
- }
- if (!(rv < 0))
- /* the completion handler for the control urb will resubmit */
- return;
-exit:
- result = usb_submit_urb(urb, GFP_ATOMIC);
- if (result) {
- dev_err(&urb->dev->dev,
- "%s - Error %d submitting interrupt urb\n",
- __func__, result);
- }
-}
-
-static int mos7840_port_paranoia_check(struct usb_serial_port *port,
- const char *function)
-{
- if (!port) {
- pr_debug("%s - port == NULL\n", function);
- return -1;
- }
- if (!port->serial) {
- pr_debug("%s - port->serial == NULL\n", function);
- return -1;
- }
-
- return 0;
-}
-
-/* Inline functions to check the sanity of a pointer that is passed to us */
-static int mos7840_serial_paranoia_check(struct usb_serial *serial,
- const char *function)
-{
- if (!serial) {
- pr_debug("%s - serial == NULL\n", function);
- return -1;
- }
- if (!serial->type) {
- pr_debug("%s - serial->type == NULL!\n", function);
- return -1;
- }
-
- return 0;
-}
-
-static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port,
- const char *function)
-{
- /* if no port was specified, or it fails a paranoia check */
- if (!port ||
- mos7840_port_paranoia_check(port, function) ||
- mos7840_serial_paranoia_check(port->serial, function)) {
- /* then say that we don't have a valid usb_serial thing,
- * which will end up genrating -ENODEV return values */
- return NULL;
- }
-
- return port->serial;
-}
-
-/*****************************************************************************
* mos7840_bulk_in_callback
* this is the callback function for when we have received data on the
* bulk in endpoint.
@@ -739,31 +431,14 @@
static void mos7840_bulk_in_callback(struct urb *urb)
{
+ struct moschip_port *mos7840_port = urb->context;
+ struct usb_serial_port *port = mos7840_port->port;
int retval;
unsigned char *data;
- struct usb_serial *serial;
- struct usb_serial_port *port;
- struct moschip_port *mos7840_port;
int status = urb->status;
-
- mos7840_port = urb->context;
- if (!mos7840_port)
- return;
if (status) {
dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status);
- mos7840_port->read_urb_busy = false;
- return;
- }
-
- port = mos7840_port->port;
- if (mos7840_port_paranoia_check(port, __func__)) {
- mos7840_port->read_urb_busy = false;
- return;
- }
-
- serial = mos7840_get_usb_serial(port, __func__);
- if (!serial) {
mos7840_port->read_urb_busy = false;
return;
}
@@ -777,12 +452,6 @@
tty_flip_buffer_push(tport);
port->icount.rx += urb->actual_length;
dev_dbg(&port->dev, "icount.rx is %d:\n", port->icount.rx);
- }
-
- if (!mos7840_port->read_urb) {
- dev_dbg(&port->dev, "%s", "URB KILLED !!!\n");
- mos7840_port->read_urb_busy = false;
- return;
}
if (mos7840_port->has_led)
@@ -805,14 +474,12 @@
static void mos7840_bulk_out_data_callback(struct urb *urb)
{
- struct moschip_port *mos7840_port;
- struct usb_serial_port *port;
+ struct moschip_port *mos7840_port = urb->context;
+ struct usb_serial_port *port = mos7840_port->port;
int status = urb->status;
unsigned long flags;
int i;
- mos7840_port = urb->context;
- port = mos7840_port->port;
spin_lock_irqsave(&mos7840_port->pool_lock, flags);
for (i = 0; i < NUM_URBS; i++) {
if (urb == mos7840_port->write_urb_pool[i]) {
@@ -827,11 +494,7 @@
return;
}
- if (mos7840_port_paranoia_check(port, __func__))
- return;
-
- if (mos7840_port->open)
- tty_port_tty_wakeup(&port->port);
+ tty_port_tty_wakeup(&port->port);
}
@@ -848,32 +511,16 @@
static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
{
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
int response;
int j;
- struct usb_serial *serial;
struct urb *urb;
__u16 Data;
int status;
- struct moschip_port *mos7840_port;
- struct moschip_port *port0;
-
- if (mos7840_port_paranoia_check(port, __func__))
- return -ENODEV;
-
- serial = port->serial;
-
- if (mos7840_serial_paranoia_check(serial, __func__))
- return -ENODEV;
-
- mos7840_port = mos7840_get_port_private(port);
- port0 = mos7840_get_port_private(serial->port[0]);
-
- if (mos7840_port == NULL || port0 == NULL)
- return -ENODEV;
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
- port0->open_ports++;
/* Initialising the write urb pool */
for (j = 0; j < NUM_URBS; ++j) {
@@ -1024,41 +671,6 @@
status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
Data);
- /* Check to see if we've set up our endpoint info yet *
- * (can't set it up in mos7840_startup as the structures *
- * were not set up at that time.) */
- if (port0->open_ports == 1) {
- /* FIXME: Buffer never NULL, so URB is not submitted. */
- if (serial->port[0]->interrupt_in_buffer == NULL) {
- /* set up interrupt urb */
- usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
- serial->dev,
- usb_rcvintpipe(serial->dev,
- serial->port[0]->interrupt_in_endpointAddress),
- serial->port[0]->interrupt_in_buffer,
- serial->port[0]->interrupt_in_urb->
- transfer_buffer_length,
- mos7840_interrupt_callback,
- serial,
- serial->port[0]->interrupt_in_urb->interval);
-
- /* start interrupt read for mos7840 */
- response =
- usb_submit_urb(serial->port[0]->interrupt_in_urb,
- GFP_KERNEL);
- if (response) {
- dev_err(&port->dev, "%s - Error %d submitting "
- "interrupt urb\n", __func__, response);
- }
-
- }
-
- }
-
- /* see if we've set up our endpoint info yet *
- * (can't set it up in mos7840_startup as the *
- * structures were not set up at that time.) */
-
dev_dbg(&port->dev, "port number is %d\n", port->port_number);
dev_dbg(&port->dev, "minor number is %d\n", port->minor);
dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
@@ -1098,9 +710,6 @@
/* initialize our port settings */
/* Must set to enable ints! */
mos7840_port->shadowMCR = MCR_MASTER_IE;
- /* send a open port command */
- mos7840_port->open = 1;
- /* mos7840_change_port_settings(mos7840_port,old_termios); */
return 0;
err:
@@ -1127,17 +736,10 @@
static int mos7840_chars_in_buffer(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
int i;
int chars = 0;
unsigned long flags;
- struct moschip_port *mos7840_port;
-
- if (mos7840_port_paranoia_check(port, __func__))
- return 0;
-
- mos7840_port = mos7840_get_port_private(port);
- if (mos7840_port == NULL)
- return 0;
spin_lock_irqsave(&mos7840_port->pool_lock, flags);
for (i = 0; i < NUM_URBS; ++i) {
@@ -1159,24 +761,9 @@
static void mos7840_close(struct usb_serial_port *port)
{
- struct usb_serial *serial;
- struct moschip_port *mos7840_port;
- struct moschip_port *port0;
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
int j;
__u16 Data;
-
- if (mos7840_port_paranoia_check(port, __func__))
- return;
-
- serial = mos7840_get_usb_serial(port, __func__);
- if (!serial)
- return;
-
- mos7840_port = mos7840_get_port_private(port);
- port0 = mos7840_get_port_private(serial->port[0]);
-
- if (mos7840_port == NULL || port0 == NULL)
- return;
for (j = 0; j < NUM_URBS; ++j)
usb_kill_urb(mos7840_port->write_urb_pool[j]);
@@ -1192,22 +779,11 @@
usb_kill_urb(mos7840_port->read_urb);
mos7840_port->read_urb_busy = false;
- port0->open_ports--;
- dev_dbg(&port->dev, "%s in close%d\n", __func__, port0->open_ports);
- if (port0->open_ports == 0) {
- if (serial->port[0]->interrupt_in_urb) {
- dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n");
- usb_kill_urb(serial->port[0]->interrupt_in_urb);
- }
- }
-
Data = 0x0;
mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
Data = 0x00;
mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
- mos7840_port->open = 0;
}
/*****************************************************************************
@@ -1217,21 +793,8 @@
static void mos7840_break(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
unsigned char data;
- struct usb_serial *serial;
- struct moschip_port *mos7840_port;
-
- if (mos7840_port_paranoia_check(port, __func__))
- return;
-
- serial = mos7840_get_usb_serial(port, __func__);
- if (!serial)
- return;
-
- mos7840_port = mos7840_get_port_private(port);
-
- if (mos7840_port == NULL)
- return;
if (break_state == -1)
data = mos7840_port->shadowLCR | LCR_SET_BREAK;
@@ -1256,17 +819,10 @@
static int mos7840_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
int i;
int room = 0;
unsigned long flags;
- struct moschip_port *mos7840_port;
-
- if (mos7840_port_paranoia_check(port, __func__))
- return -1;
-
- mos7840_port = mos7840_get_port_private(port);
- if (mos7840_port == NULL)
- return -1;
spin_lock_irqsave(&mos7840_port->pool_lock, flags);
for (i = 0; i < NUM_URBS; ++i) {
@@ -1292,29 +848,16 @@
static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *data, int count)
{
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
int status;
int i;
int bytes_sent = 0;
int transfer_size;
unsigned long flags;
-
- struct moschip_port *mos7840_port;
- struct usb_serial *serial;
struct urb *urb;
/* __u16 Data; */
const unsigned char *current_position = data;
- unsigned char *data1;
-
- if (mos7840_port_paranoia_check(port, __func__))
- return -1;
-
- serial = port->serial;
- if (mos7840_serial_paranoia_check(serial, __func__))
- return -1;
-
- mos7840_port = mos7840_get_port_private(port);
- if (mos7840_port == NULL)
- return -1;
/* try to find a free urb in the list */
urb = NULL;
@@ -1366,7 +909,6 @@
mos7840_bulk_out_data_callback, mos7840_port);
}
- data1 = urb->transfer_buffer;
dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);
if (mos7840_port->has_led)
@@ -1399,21 +941,8 @@
static void mos7840_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- struct moschip_port *mos7840_port;
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
int status;
-
- if (mos7840_port_paranoia_check(port, __func__))
- return;
-
- mos7840_port = mos7840_get_port_private(port);
-
- if (mos7840_port == NULL)
- return;
-
- if (!mos7840_port->open) {
- dev_dbg(&port->dev, "%s", "port not opened\n");
- return;
- }
/* if we are implementing XON/XOFF, send the stop character */
if (I_IXOFF(tty)) {
@@ -1441,19 +970,8 @@
static void mos7840_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
int status;
- struct moschip_port *mos7840_port = mos7840_get_port_private(port);
-
- if (mos7840_port_paranoia_check(port, __func__))
- return;
-
- if (mos7840_port == NULL)
- return;
-
- if (!mos7840_port->open) {
- dev_dbg(&port->dev, "%s - port not opened\n", __func__);
- return;
- }
/* if we are implementing XON/XOFF, send the start character */
if (I_IXOFF(tty)) {
@@ -1476,15 +994,10 @@
static int mos7840_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- struct moschip_port *mos7840_port;
unsigned int result;
__u16 msr;
__u16 mcr;
int status;
- mos7840_port = mos7840_get_port_private(port);
-
- if (mos7840_port == NULL)
- return -ENODEV;
status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
if (status < 0)
@@ -1509,14 +1022,9 @@
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
- struct moschip_port *mos7840_port;
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
unsigned int mcr;
int status;
-
- mos7840_port = mos7840_get_port_private(port);
-
- if (mos7840_port == NULL)
- return -ENODEV;
/* FIXME: What locks the port registers ? */
mcr = mos7840_port->shadowMCR;
@@ -1594,24 +1102,11 @@
static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
int baudRate)
{
+ struct usb_serial_port *port = mos7840_port->port;
int divisor = 0;
int status;
__u16 Data;
- unsigned char number;
__u16 clk_sel_val;
- struct usb_serial_port *port;
-
- if (mos7840_port == NULL)
- return -1;
-
- port = mos7840_port->port;
- if (mos7840_port_paranoia_check(port, __func__))
- return -1;
-
- if (mos7840_serial_paranoia_check(port->serial, __func__))
- return -1;
-
- number = mos7840_port->port->port_number;
dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate);
/* reset clk_uart_sel in spregOffset */
@@ -1700,41 +1195,20 @@
static void mos7840_change_port_settings(struct tty_struct *tty,
struct moschip_port *mos7840_port, struct ktermios *old_termios)
{
+ struct usb_serial_port *port = mos7840_port->port;
int baud;
unsigned cflag;
- unsigned iflag;
__u8 lData;
__u8 lParity;
__u8 lStop;
int status;
__u16 Data;
- struct usb_serial_port *port;
- struct usb_serial *serial;
-
- if (mos7840_port == NULL)
- return;
-
- port = mos7840_port->port;
-
- if (mos7840_port_paranoia_check(port, __func__))
- return;
-
- if (mos7840_serial_paranoia_check(port->serial, __func__))
- return;
-
- serial = port->serial;
-
- if (!mos7840_port->open) {
- dev_dbg(&port->dev, "%s - port not opened\n", __func__);
- return;
- }
lData = LCR_BITS_8;
lStop = LCR_STOP_1;
lParity = LCR_PAR_NONE;
cflag = tty->termios.c_cflag;
- iflag = tty->termios.c_iflag;
/* Change the number of bits */
switch (cflag & CSIZE) {
@@ -1863,36 +1337,12 @@
struct usb_serial_port *port,
struct ktermios *old_termios)
{
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
int status;
- struct usb_serial *serial;
- struct moschip_port *mos7840_port;
-
- if (mos7840_port_paranoia_check(port, __func__))
- return;
-
- serial = port->serial;
-
- if (mos7840_serial_paranoia_check(serial, __func__))
- return;
-
- mos7840_port = mos7840_get_port_private(port);
-
- if (mos7840_port == NULL)
- return;
-
- if (!mos7840_port->open) {
- dev_dbg(&port->dev, "%s - port not opened\n", __func__);
- return;
- }
/* change the port settings to the new ones specified */
mos7840_change_port_settings(tty, mos7840_port, old_termios);
-
- if (!mos7840_port->read_urb) {
- dev_dbg(&port->dev, "%s", "URB KILLED !!!!!\n");
- return;
- }
if (!mos7840_port->read_urb_busy) {
mos7840_port->read_urb_busy = true;
@@ -1936,27 +1386,20 @@
* function to get information about serial port
*****************************************************************************/
-static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
- struct serial_struct __user *retinfo)
+static int mos7840_get_serial_info(struct tty_struct *tty,
+ struct serial_struct *ss)
{
- struct serial_struct tmp;
+ struct usb_serial_port *port = tty->driver_data;
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
- if (mos7840_port == NULL)
- return -1;
-
- memset(&tmp, 0, sizeof(tmp));
-
- tmp.type = PORT_16550A;
- tmp.line = mos7840_port->port->minor;
- tmp.port = mos7840_port->port->port_number;
- tmp.irq = 0;
- tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
- tmp.baud_base = 9600;
- tmp.close_delay = 5 * HZ;
- tmp.closing_wait = 30 * HZ;
-
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return -EFAULT;
+ ss->type = PORT_16550A;
+ ss->line = mos7840_port->port->minor;
+ ss->port = mos7840_port->port->port_number;
+ ss->irq = 0;
+ ss->xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
+ ss->baud_base = 9600;
+ ss->close_delay = 5 * HZ;
+ ss->closing_wait = 30 * HZ;
return 0;
}
@@ -1970,15 +1413,6 @@
{
struct usb_serial_port *port = tty->driver_data;
void __user *argp = (void __user *)arg;
- struct moschip_port *mos7840_port;
-
- if (mos7840_port_paranoia_check(port, __func__))
- return -1;
-
- mos7840_port = mos7840_get_port_private(port);
-
- if (mos7840_port == NULL)
- return -1;
switch (cmd) {
/* return number of bytes available */
@@ -1987,19 +1421,19 @@
dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__);
return mos7840_get_lsr_info(tty, argp);
- case TIOCGSERIAL:
- dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__);
- return mos7840_get_serial_info(mos7840_port, argp);
-
- case TIOCSSERIAL:
- dev_dbg(&port->dev, "%s TIOCSSERIAL\n", __func__);
- break;
default:
break;
}
return -ENOIOCTLCMD;
}
+/*
+ * Check if GPO (pin 42) is connected to GPI (pin 33) as recommended by ASIX
+ * for MCS7810 by bit-banging a 16-bit word.
+ *
+ * Note that GPO is really RTS of the third port so this will toggle RTS of
+ * port two or three on two- and four-port devices.
+ */
static int mos7810_check(struct usb_serial *serial)
{
int i, pass_count = 0;
@@ -2057,21 +1491,12 @@
static int mos7840_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
- u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
- u16 vid = le16_to_cpu(serial->dev->descriptor.idVendor);
+ unsigned long device_flags = id->driver_info;
u8 *buf;
- int device_type;
- if (product == MOSCHIP_DEVICE_ID_7810 ||
- product == MOSCHIP_DEVICE_ID_7820) {
- device_type = product;
+ /* Skip device-type detection if we already have device flags. */
+ if (device_flags)
goto out;
- }
-
- if (vid == USB_VENDOR_ID_MOXA && product == MOXA_DEVICE_ID_2210) {
- device_type = MOSCHIP_DEVICE_ID_7820;
- goto out;
- }
buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
if (!buf)
@@ -2083,15 +1508,15 @@
/* For a MCS7840 device GPIO0 must be set to 1 */
if (buf[0] & 0x01)
- device_type = MOSCHIP_DEVICE_ID_7840;
+ device_flags = MCS_PORTS(4);
else if (mos7810_check(serial))
- device_type = MOSCHIP_DEVICE_ID_7810;
+ device_flags = MCS_PORTS(1) | MCS_LED;
else
- device_type = MOSCHIP_DEVICE_ID_7820;
+ device_flags = MCS_PORTS(2);
kfree(buf);
out:
- usb_set_serial_data(serial, (void *)(unsigned long)device_type);
+ usb_set_serial_data(serial, (void *)device_flags);
return 0;
}
@@ -2099,16 +1524,10 @@
static int mos7840_calc_num_ports(struct usb_serial *serial,
struct usb_serial_endpoints *epds)
{
- int device_type = (unsigned long)usb_get_serial_data(serial);
- int num_ports;
+ unsigned long device_flags = (unsigned long)usb_get_serial_data(serial);
+ int num_ports = MCS_PORTS(device_flags);
- num_ports = (device_type >> 4) & 0x000F;
-
- /*
- * num_ports is currently never zero as device_type is one of
- * MOSCHIP_DEVICE_ID_78{1,2,4}0.
- */
- if (num_ports == 0)
+ if (num_ports == 0 || num_ports > 4)
return -ENODEV;
if (epds->num_bulk_in < num_ports || epds->num_bulk_out < num_ports) {
@@ -2119,10 +1538,27 @@
return num_ports;
}
+static int mos7840_attach(struct usb_serial *serial)
+{
+ struct device *dev = &serial->interface->dev;
+ int status;
+ u16 val;
+
+ /* Zero Length flag enable */
+ val = 0x0f;
+ status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, val);
+ if (status < 0)
+ dev_dbg(dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
+ else
+ dev_dbg(dev, "ZLP_REG5 Writing success status%d\n", status);
+
+ return status;
+}
+
static int mos7840_port_probe(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
- int device_type = (unsigned long)usb_get_serial_data(serial);
+ unsigned long device_flags = (unsigned long)usb_get_serial_data(serial);
struct moschip_port *mos7840_port;
int status;
int pnum;
@@ -2143,7 +1579,6 @@
* common to all port */
mos7840_port->port = port;
- mos7840_set_port_private(port, mos7840_port);
spin_lock_init(&mos7840_port->pool_lock);
/* minor is not initialised until later by
@@ -2157,32 +1592,26 @@
mos7840_port->SpRegOffset = 0x0;
mos7840_port->ControlRegOffset = 0x1;
mos7840_port->DcrRegOffset = 0x4;
- } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0x8;
- mos7840_port->ControlRegOffset = 0x9;
- mos7840_port->DcrRegOffset = 0x16;
- } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xc;
- mos7840_port->ControlRegOffset = 0xd;
- mos7840_port->DcrRegOffset = 0x1c;
+ } else {
+ u8 phy_num = mos7840_port->port_num;
+
+ /* Port 2 in the 2-port case uses registers of port 3 */
+ if (serial->num_ports == 2)
+ phy_num = 3;
+
+ mos7840_port->SpRegOffset = 0x8 + 2 * (phy_num - 2);
+ mos7840_port->ControlRegOffset = 0x9 + 2 * (phy_num - 2);
+ mos7840_port->DcrRegOffset = 0x16 + 3 * (phy_num - 2);
}
mos7840_dump_serial_port(port, mos7840_port);
- mos7840_set_port_private(port, mos7840_port);
+ usb_set_serial_port_data(port, mos7840_port);
/* enable rx_disable bit in control register */
status = mos7840_get_reg_sync(port,
mos7840_port->ControlRegOffset, &Data);
if (status < 0) {
dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status);
- goto out;
+ goto error;
} else
dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
Data |= 0x08; /* setting driver done bit */
@@ -2194,7 +1623,7 @@
mos7840_port->ControlRegOffset, Data);
if (status < 0) {
dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
- goto out;
+ goto error;
} else
dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
@@ -2205,7 +1634,7 @@
(__u16) (mos7840_port->DcrRegOffset + 0), Data);
if (status < 0) {
dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status);
- goto out;
+ goto error;
} else
dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status);
@@ -2214,7 +1643,7 @@
(__u16) (mos7840_port->DcrRegOffset + 1), Data);
if (status < 0) {
dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status);
- goto out;
+ goto error;
} else
dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status);
@@ -2223,7 +1652,7 @@
(__u16) (mos7840_port->DcrRegOffset + 2), Data);
if (status < 0) {
dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status);
- goto out;
+ goto error;
} else
dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status);
@@ -2232,7 +1661,7 @@
status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data);
if (status < 0) {
dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
- goto out;
+ goto error;
} else
dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
@@ -2249,7 +1678,7 @@
status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
if (status < 0) {
dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
- goto out;
+ goto error;
} else
dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
@@ -2263,7 +1692,7 @@
(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
if (status < 0) {
dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status);
- goto out;
+ goto error;
} else
dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status);
} else {
@@ -2275,27 +1704,16 @@
(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
if (status < 0) {
dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status);
- goto out;
+ goto error;
} else
dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);
}
- mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
- mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
- mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
- GFP_KERNEL);
- if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
- !mos7840_port->dr) {
- status = -ENOMEM;
- goto error;
- }
- mos7840_port->has_led = false;
+ mos7840_port->has_led = device_flags & MCS_LED;
/* Initialize LED timers */
- if (device_type == MOSCHIP_DEVICE_ID_7810) {
- mos7840_port->has_led = true;
-
+ if (mos7840_port->has_led) {
mos7840_port->led_urb = usb_alloc_urb(0, GFP_KERNEL);
mos7840_port->led_dr = kmalloc(sizeof(*mos7840_port->led_dr),
GFP_KERNEL);
@@ -2315,24 +1733,11 @@
/* Turn off LED */
mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
}
-out:
- if (pnum == serial->num_ports - 1) {
- /* Zero Length flag enable */
- Data = 0x0f;
- status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
- if (status < 0) {
- dev_dbg(&port->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
- goto error;
- } else
- dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status);
- }
+
return 0;
error:
kfree(mos7840_port->led_dr);
usb_free_urb(mos7840_port->led_urb);
- kfree(mos7840_port->dr);
- kfree(mos7840_port->ctrl_buf);
- usb_free_urb(mos7840_port->control_urb);
kfree(mos7840_port);
return status;
@@ -2340,9 +1745,7 @@
static int mos7840_port_remove(struct usb_serial_port *port)
{
- struct moschip_port *mos7840_port;
-
- mos7840_port = mos7840_get_port_private(port);
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
if (mos7840_port->has_led) {
/* Turn off LED */
@@ -2355,10 +1758,7 @@
usb_free_urb(mos7840_port->led_urb);
kfree(mos7840_port->led_dr);
}
- usb_kill_urb(mos7840_port->control_urb);
- usb_free_urb(mos7840_port->control_urb);
- kfree(mos7840_port->ctrl_buf);
- kfree(mos7840_port->dr);
+
kfree(mos7840_port);
return 0;
@@ -2381,17 +1781,17 @@
.unthrottle = mos7840_unthrottle,
.calc_num_ports = mos7840_calc_num_ports,
.probe = mos7840_probe,
+ .attach = mos7840_attach,
.ioctl = mos7840_ioctl,
+ .get_serial = mos7840_get_serial_info,
.set_termios = mos7840_set_termios,
.break_ctl = mos7840_break,
.tiocmget = mos7840_tiocmget,
.tiocmset = mos7840_tiocmset,
- .tiocmiwait = usb_serial_generic_tiocmiwait,
.get_icount = usb_serial_generic_get_icount,
.port_probe = mos7840_port_probe,
.port_remove = mos7840_port_remove,
.read_bulk_callback = mos7840_bulk_in_callback,
- .read_int_callback = mos7840_interrupt_callback,
};
static struct usb_serial_driver * const serial_drivers[] = {
--
Gitblit v1.6.2