From e636c8d336489bf3eed5878299e6cc045bbad077 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 20 Feb 2024 01:17:29 +0000
Subject: [PATCH] debug lk
---
kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi | 86 +++++++++++++++++++++++-------------------
1 files changed, 47 insertions(+), 39 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi b/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
index 3135b2f..5e7b0cd 100755
--- a/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
+++ b/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
@@ -34,15 +34,6 @@
vin-supply = <&vcc3v3_sys>;
};
- vcc3v3_vga: vcc3v3-vga {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_vga";
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vcc3v3_sys>;
- };
pcie30_avdd0v9: pcie30-avdd0v9 {
compatible = "regulator-fixed";
@@ -145,10 +136,10 @@
gpio_function = <0>;
};
- hp_en {
- gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
- gpio_function = <0>;
- };
+ //gpio99 {
+ // gpio_num = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;//HP_EN_GPIO3_A6_3V3
+ // gpio_function = <1>;
+ //};
wifi_power_en {
gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
@@ -235,8 +226,8 @@
nodka-lvds = <15>;
display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
+ native-mode = <&timing>;
+ timing: timing {
clock-frequency = <72500000>;
hactive = <1280>;
vactive = <800>;
@@ -253,8 +244,8 @@
};
};
ports {
- panel_in: endpoint {
- remote-endpoint = <&edp_out>;
+ panel_in_lvds: endpoint {
+ remote-endpoint = <&lvds_out>;
};
};
};
@@ -321,7 +312,7 @@
* when dsi0 is enabled
*/
&video_phy0 {
- status = "disabled";
+ status = "okay";
};
&dsi0 {
@@ -346,7 +337,7 @@
*/
&video_phy1 {
- status = "okay";
+ status = "disabled";
};
&dsi1 {
status = "disabled";
@@ -357,11 +348,11 @@
};
&dsi1_in_vp1 {
- status = "okay";
+ status = "disabled";
};
&dsi1_panel {
- power-supply = <&vcc3v3_lcd1_n>; //MIPI_3V3EN_GPIO3_A3_d_3V3
+// power-supply = <&vcc3v3_lcd1_n>; //MIPI_3V3EN_GPIO3_A3_d_3V3
vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
@@ -381,20 +372,11 @@
&edp {
force-hpd;
- status = "okay";
- ports {
- port@1 {
- reg = <1>;
- edp_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
-
- };
+ status = "disabled";
};
&edp_phy {
- status = "okay";
+ status = "disabled";
};
&edp_in_vp0 {
@@ -402,18 +384,40 @@
};
&edp_in_vp1 {
- status = "okay";
+ status = "disabled";
};
&route_edp {
- status = "okay";
+ status = "disabled";
connect = <&vp1_out_edp>;
};
&route_edp {
+ status = "disabled";
+};
+
+&lvds {
+ status = "okay";
+ ports {
+ port@1 {
+ reg = <1>;
+ lvds_out:endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+};
+
+&route_lvds{
+ status = "okay";
+ connect = <&vp1_out_lvds>;
+};
+
+&lvds_in_vp1 {
status = "okay";
};
+
/*
* edp_end
*/
@@ -631,7 +635,7 @@
&pcie30phy {
- status = "okay";
+ status = "disabled";
};
&pcie2x1 {
@@ -690,11 +694,15 @@
<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
<2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
<2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
<2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
+ <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -765,10 +773,10 @@
enable-active-high;
};
-&vcc3v3_lcd1_n {
- gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
- enable-active-high;
-};
+//&vcc3v3_lcd1_n {
+ //gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
+ //enable-active-high;
+//};
&wireless_wlan {
pinctrl-names = "default";
--
Gitblit v1.6.2