From d2ccde1c8e90d38cee87a1b0309ad2827f3fd30d Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 11 Dec 2023 02:45:28 +0000
Subject: [PATCH] add boot partition size
---
kernel/drivers/spi/spi-ep93xx.c | 54 ++++++++++++++++--------------------------------------
1 files changed, 16 insertions(+), 38 deletions(-)
diff --git a/kernel/drivers/spi/spi-ep93xx.c b/kernel/drivers/spi/spi-ep93xx.c
index 79fc394..aa67655 100644
--- a/kernel/drivers/spi/spi-ep93xx.c
+++ b/kernel/drivers/spi/spi-ep93xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Driver for Cirrus Logic EP93xx SPI controller.
*
@@ -9,11 +10,7 @@
*
* For more information about the SPI controller see documentation on Cirrus
* Logic web site:
- * http://www.cirrus.com/en/pubs/manual/EP93xx_Users_Guide_UM1.pdf
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * https://www.cirrus.com/en/pubs/manual/EP93xx_Users_Guide_UM1.pdf
*/
#include <linux/io.h>
@@ -28,14 +25,14 @@
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/scatterlist.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/dma-ep93xx.h>
#include <linux/platform_data/spi-ep93xx.h>
#define SSPCR0 0x0000
-#define SSPCR0_MODE_SHIFT 6
+#define SSPCR0_SPO BIT(6)
+#define SSPCR0_SPH BIT(7)
#define SSPCR0_SCR_SHIFT 8
#define SSPCR1 0x0004
@@ -163,7 +160,10 @@
return err;
cr0 = div_scr << SSPCR0_SCR_SHIFT;
- cr0 |= (spi->mode & (SPI_CPHA | SPI_CPOL)) << SSPCR0_MODE_SHIFT;
+ if (spi->mode & SPI_CPOL)
+ cr0 |= SSPCR0_SPO;
+ if (spi->mode & SPI_CPHA)
+ cr0 |= SSPCR0_SPH;
cr0 |= dss;
dev_dbg(&master->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
@@ -214,7 +214,7 @@
/**
* ep93xx_spi_read_write() - perform next RX/TX transfer
- * @espi: ep93xx SPI controller struct
+ * @master: SPI master
*
* This function transfers next bytes (or half-words) to/from RX/TX FIFOs. If
* called several times, the whole transfer will be completed. Returns
@@ -652,7 +652,6 @@
struct resource *res;
int irq;
int error;
- int i;
info = dev_get_platdata(&pdev->dev);
if (!info) {
@@ -661,10 +660,8 @@
}
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "failed to get irq resources\n");
+ if (irq < 0)
return -EBUSY;
- }
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -676,6 +673,7 @@
if (!master)
return -ENOMEM;
+ master->use_gpio_descriptors = true;
master->prepare_transfer_hardware = ep93xx_spi_prepare_hardware;
master->unprepare_transfer_hardware = ep93xx_spi_unprepare_hardware;
master->prepare_message = ep93xx_spi_prepare_message;
@@ -683,31 +681,11 @@
master->bus_num = pdev->id;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
-
- master->num_chipselect = info->num_chipselect;
- master->cs_gpios = devm_kcalloc(&master->dev,
- master->num_chipselect, sizeof(int),
- GFP_KERNEL);
- if (!master->cs_gpios) {
- error = -ENOMEM;
- goto fail_release_master;
- }
-
- for (i = 0; i < master->num_chipselect; i++) {
- master->cs_gpios[i] = info->chipselect[i];
-
- if (!gpio_is_valid(master->cs_gpios[i]))
- continue;
-
- error = devm_gpio_request_one(&pdev->dev, master->cs_gpios[i],
- GPIOF_OUT_INIT_HIGH,
- "ep93xx-spi");
- if (error) {
- dev_err(&pdev->dev, "could not request cs gpio %d\n",
- master->cs_gpios[i]);
- goto fail_release_master;
- }
- }
+ /*
+ * The SPI core will count the number of GPIO descriptors to figure
+ * out the number of chip selects available on the platform.
+ */
+ master->num_chipselect = 0;
platform_set_drvdata(pdev, master);
--
Gitblit v1.6.2