From d2ccde1c8e90d38cee87a1b0309ad2827f3fd30d Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 11 Dec 2023 02:45:28 +0000
Subject: [PATCH] add boot partition size
---
kernel/drivers/soc/bcm/brcmstb/biuctrl.c | 143 +++++++++++++++++++++++++++++++++++++++--------
1 files changed, 117 insertions(+), 26 deletions(-)
diff --git a/kernel/drivers/soc/bcm/brcmstb/biuctrl.c b/kernel/drivers/soc/bcm/brcmstb/biuctrl.c
index 20b63be..7f8dc30 100644
--- a/kernel/drivers/soc/bcm/brcmstb/biuctrl.c
+++ b/kernel/drivers/soc/bcm/brcmstb/biuctrl.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Broadcom STB SoCs Bus Unit Interface controls
*
* Copyright (C) 2015, Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#define pr_fmt(fmt) "brcmstb: " KBUILD_MODNAME ": " fmt
@@ -20,6 +12,22 @@
#include <linux/of_address.h>
#include <linux/syscore_ops.h>
#include <linux/soc/brcmstb/brcmstb.h>
+
+#define RACENPREF_MASK 0x3
+#define RACPREFINST_SHIFT 0
+#define RACENINST_SHIFT 2
+#define RACPREFDATA_SHIFT 4
+#define RACENDATA_SHIFT 6
+#define RAC_CPU_SHIFT 8
+#define RACCFG_MASK 0xff
+#define DPREF_LINE_2_SHIFT 24
+#define DPREF_LINE_2_MASK 0xff
+
+/* Bitmask to enable instruction and data prefetching with a 256-bytes stride */
+#define RAC_DATA_INST_EN_MASK (1 << RACPREFINST_SHIFT | \
+ RACENPREF_MASK << RACENINST_SHIFT | \
+ 1 << RACPREFDATA_SHIFT | \
+ RACENPREF_MASK << RACENDATA_SHIFT)
#define CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK 0x70000000
#define CPU_CREDIT_REG_MCPx_READ_CRED_MASK 0xf
@@ -39,11 +47,21 @@
static bool mcp_wr_pairing_en;
static const int *cpubiuctrl_regs;
+enum cpubiuctrl_regs {
+ CPU_CREDIT_REG = 0,
+ CPU_MCP_FLOW_REG,
+ CPU_WRITEBACK_CTRL_REG,
+ RAC_CONFIG0_REG,
+ RAC_CONFIG1_REG,
+ NUM_CPU_BIUCTRL_REGS,
+};
+
static inline u32 cbc_readl(int reg)
{
int offset = cpubiuctrl_regs[reg];
- if (offset == -1)
+ if (offset == -1 ||
+ (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG))
return (u32)-1;
return readl_relaxed(cpubiuctrl_base + offset);
@@ -53,38 +71,45 @@
{
int offset = cpubiuctrl_regs[reg];
- if (offset == -1)
+ if (offset == -1 ||
+ (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG))
return;
writel(val, cpubiuctrl_base + offset);
}
-enum cpubiuctrl_regs {
- CPU_CREDIT_REG = 0,
- CPU_MCP_FLOW_REG,
- CPU_WRITEBACK_CTRL_REG
-};
-
static const int b15_cpubiuctrl_regs[] = {
[CPU_CREDIT_REG] = 0x184,
[CPU_MCP_FLOW_REG] = -1,
[CPU_WRITEBACK_CTRL_REG] = -1,
+ [RAC_CONFIG0_REG] = -1,
+ [RAC_CONFIG1_REG] = -1,
};
-/* Odd cases, e.g: 7260 */
+/* Odd cases, e.g: 7260A0 */
static const int b53_cpubiuctrl_no_wb_regs[] = {
[CPU_CREDIT_REG] = 0x0b0,
[CPU_MCP_FLOW_REG] = 0x0b4,
[CPU_WRITEBACK_CTRL_REG] = -1,
+ [RAC_CONFIG0_REG] = 0x78,
+ [RAC_CONFIG1_REG] = 0x7c,
};
static const int b53_cpubiuctrl_regs[] = {
[CPU_CREDIT_REG] = 0x0b0,
[CPU_MCP_FLOW_REG] = 0x0b4,
[CPU_WRITEBACK_CTRL_REG] = 0x22c,
+ [RAC_CONFIG0_REG] = 0x78,
+ [RAC_CONFIG1_REG] = 0x7c,
};
-#define NUM_CPU_BIUCTRL_REGS 3
+static const int a72_cpubiuctrl_regs[] = {
+ [CPU_CREDIT_REG] = 0x18,
+ [CPU_MCP_FLOW_REG] = 0x1c,
+ [CPU_WRITEBACK_CTRL_REG] = 0x20,
+ [RAC_CONFIG0_REG] = 0x08,
+ [RAC_CONFIG1_REG] = 0x0c,
+};
static int __init mcp_write_pairing_set(void)
{
@@ -109,25 +134,86 @@
return 0;
}
-static const u32 b53_mach_compat[] = {
+static const u32 a72_b53_mach_compat[] = {
+ 0x7211,
+ 0x7216,
+ 0x72164,
+ 0x72165,
+ 0x7255,
+ 0x7260,
0x7268,
0x7271,
0x7278,
};
-static void __init mcp_b53_set(void)
+/* The read-ahead cache present in the Brahma-B53 CPU is a special piece of
+ * hardware after the integrated L2 cache of the B53 CPU complex whose purpose
+ * is to prefetch instruction and/or data with a line size of either 64 bytes
+ * or 256 bytes. The rationale is that the data-bus of the CPU interface is
+ * optimized for 256-byte transactions, and enabling the read-ahead cache
+ * provides a significant performance boost (typically twice the performance
+ * for a memcpy benchmark application).
+ *
+ * The read-ahead cache is transparent for Virtual Address cache maintenance
+ * operations: IC IVAU, DC IVAC, DC CVAC, DC CVAU and DC CIVAC. So no special
+ * handling is needed for the DMA API above and beyond what is included in the
+ * arm64 implementation.
+ *
+ * In addition, since the Point of Unification is typically between L1 and L2
+ * for the Brahma-B53 processor no special read-ahead cache handling is needed
+ * for the IC IALLU and IC IALLUIS cache maintenance operations.
+ *
+ * However, it is not possible to specify the cache level (L3) for the cache
+ * maintenance instructions operating by set/way to operate on the read-ahead
+ * cache. The read-ahead cache will maintain coherency when inner cache lines
+ * are cleaned by set/way, but if it is necessary to invalidate inner cache
+ * lines by set/way to maintain coherency with system masters operating on
+ * shared memory that does not have hardware support for coherency, then it
+ * will also be necessary to explicitly invalidate the read-ahead cache.
+ */
+static void __init a72_b53_rac_enable_all(struct device_node *np)
+{
+ unsigned int cpu;
+ u32 enable = 0, pref_dist, shift;
+
+ if (IS_ENABLED(CONFIG_CACHE_B15_RAC))
+ return;
+
+ if (WARN(num_possible_cpus() > 4, "RAC only supports 4 CPUs\n"))
+ return;
+
+ pref_dist = cbc_readl(RAC_CONFIG1_REG);
+ for_each_possible_cpu(cpu) {
+ shift = cpu * RAC_CPU_SHIFT + RACPREFDATA_SHIFT;
+ enable |= RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT);
+ if (cpubiuctrl_regs == a72_cpubiuctrl_regs) {
+ enable &= ~(RACENPREF_MASK << shift);
+ enable |= 3 << shift;
+ pref_dist |= 1 << (cpu + DPREF_LINE_2_SHIFT);
+ }
+ }
+
+ cbc_writel(enable, RAC_CONFIG0_REG);
+ cbc_writel(pref_dist, RAC_CONFIG1_REG);
+
+ pr_info("%pOF: Broadcom %s read-ahead cache\n",
+ np, cpubiuctrl_regs == a72_cpubiuctrl_regs ?
+ "Cortex-A72" : "Brahma-B53");
+}
+
+static void __init mcp_a72_b53_set(void)
{
unsigned int i;
u32 reg;
reg = brcmstb_get_family_id();
- for (i = 0; i < ARRAY_SIZE(b53_mach_compat); i++) {
- if (BRCM_ID(reg) == b53_mach_compat[i])
+ for (i = 0; i < ARRAY_SIZE(a72_b53_mach_compat); i++) {
+ if (BRCM_ID(reg) == a72_b53_mach_compat[i])
break;
}
- if (i == ARRAY_SIZE(b53_mach_compat))
+ if (i == ARRAY_SIZE(a72_b53_mach_compat))
return;
/* Set all 3 MCP interfaces to 8 credits */
@@ -165,6 +251,7 @@
static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
{
struct device_node *cpu_dn;
+ u32 family_id;
int ret = 0;
cpubiuctrl_base = of_iomap(np, 0);
@@ -187,13 +274,16 @@
cpubiuctrl_regs = b15_cpubiuctrl_regs;
else if (of_device_is_compatible(cpu_dn, "brcm,brahma-b53"))
cpubiuctrl_regs = b53_cpubiuctrl_regs;
+ else if (of_device_is_compatible(cpu_dn, "arm,cortex-a72"))
+ cpubiuctrl_regs = a72_cpubiuctrl_regs;
else {
pr_err("unsupported CPU\n");
ret = -EINVAL;
}
of_node_put(cpu_dn);
- if (BRCM_ID(brcmstb_get_family_id()) == 0x7260)
+ family_id = brcmstb_get_family_id();
+ if (BRCM_ID(family_id) == 0x7260 && BRCM_REV(family_id) == 0)
cpubiuctrl_regs = b53_cpubiuctrl_no_wb_regs;
out:
of_node_put(np);
@@ -256,7 +346,8 @@
return ret;
}
- mcp_b53_set();
+ a72_b53_rac_enable_all(np);
+ mcp_a72_b53_set();
#ifdef CONFIG_PM_SLEEP
register_syscore_ops(&brcmstb_cpu_credit_syscore_ops);
#endif
--
Gitblit v1.6.2