From d2ccde1c8e90d38cee87a1b0309ad2827f3fd30d Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 11 Dec 2023 02:45:28 +0000
Subject: [PATCH] add boot partition size
---
kernel/arch/powerpc/sysdev/dart_iommu.c | 96 +++++++++++++++++-------------------------------
1 files changed, 34 insertions(+), 62 deletions(-)
diff --git a/kernel/arch/powerpc/sysdev/dart_iommu.c b/kernel/arch/powerpc/sysdev/dart_iommu.c
index 5ca3e22..8ff9bcf 100644
--- a/kernel/arch/powerpc/sysdev/dart_iommu.c
+++ b/kernel/arch/powerpc/sysdev/dart_iommu.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* arch/powerpc/sysdev/dart_iommu.c
*
@@ -10,21 +11,6 @@
* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
*
* Dynamic DMA mapping support, Apple U3, U4 & IBM CPC925 "DART" iommu.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
@@ -158,7 +144,7 @@
unsigned int tmp;
/* Perform a standard cache flush */
- flush_inval_dcache_range(start, end);
+ flush_dcache_range(start, end);
/*
* Perform the sequence described in the CPC925 manual to
@@ -251,8 +237,11 @@
* 16MB (1 << 24) alignment. We allocate a full 16Mb chuck since we
* will blow up an entire large page anyway in the kernel mapping.
*/
- dart_tablebase = __va(memblock_alloc_base(1UL<<24,
- 1UL<<24, 0x80000000L));
+ dart_tablebase = memblock_alloc_try_nid_raw(SZ_16M, SZ_16M,
+ MEMBLOCK_LOW_LIMIT, SZ_2G,
+ NUMA_NO_NODE);
+ if (!dart_tablebase)
+ panic("Failed to allocate 16MB below 2GB for DART table\n");
/* There is no point scanning the DART space for leaks*/
kmemleak_no_scan((void *)dart_tablebase);
@@ -261,7 +250,10 @@
* that to work around what looks like a problem with the HT bridge
* prefetching into invalid pages and corrupting data
*/
- tmp = memblock_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
+ tmp = memblock_phys_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
+ if (!tmp)
+ panic("DART: table allocation failed\n");
+
dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) &
DARTMAP_RPNMASK);
@@ -352,19 +344,12 @@
iommu_table_dart.it_index = 0;
iommu_table_dart.it_blocksize = 1;
iommu_table_dart.it_ops = &iommu_dart_ops;
- iommu_init_table(&iommu_table_dart, -1);
+ iommu_init_table(&iommu_table_dart, -1, 0, 0);
/* Reserve the last page of the DART to avoid possible prefetch
* past the DART mapped area
*/
set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
-}
-
-static void pci_dma_dev_setup_dart(struct pci_dev *dev)
-{
- if (dart_is_u4)
- set_dma_offset(&dev->dev, DART_U4_BYPASS_BASE);
- set_iommu_table_base(&dev->dev, &iommu_table_dart);
}
static void pci_dma_bus_setup_dart(struct pci_bus *bus)
@@ -390,27 +375,18 @@
return false;
}
-static int dart_dma_set_mask(struct device *dev, u64 dma_mask)
+static void pci_dma_dev_setup_dart(struct pci_dev *dev)
{
- if (!dev->dma_mask || !dma_supported(dev, dma_mask))
- return -EIO;
+ if (dart_is_u4 && dart_device_on_pcie(&dev->dev))
+ dev->dev.archdata.dma_offset = DART_U4_BYPASS_BASE;
+ set_iommu_table_base(&dev->dev, &iommu_table_dart);
+}
- /* U4 supports a DART bypass, we use it for 64-bit capable
- * devices to improve performances. However, that only works
- * for devices connected to U4 own PCIe interface, not bridged
- * through hypertransport. We need the device to support at
- * least 40 bits of addresses.
- */
- if (dart_device_on_pcie(dev) && dma_mask >= DMA_BIT_MASK(40)) {
- dev_info(dev, "Using 64-bit DMA iommu bypass\n");
- set_dma_ops(dev, &dma_nommu_ops);
- } else {
- dev_info(dev, "Using 32-bit DMA via iommu\n");
- set_dma_ops(dev, &dma_iommu_ops);
- }
-
- *dev->dma_mask = dma_mask;
- return 0;
+static bool iommu_bypass_supported_dart(struct pci_dev *dev, u64 mask)
+{
+ return dart_is_u4 &&
+ dart_device_on_pcie(&dev->dev) &&
+ mask >= DMA_BIT_MASK(40);
}
void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
@@ -427,27 +403,23 @@
}
/* Initialize the DART HW */
- if (dart_init(dn) != 0)
- goto bail;
-
- /* Setup bypass if supported */
- if (dart_is_u4)
- ppc_md.dma_set_mask = dart_dma_set_mask;
-
+ if (dart_init(dn) != 0) {
+ of_node_put(dn);
+ return;
+ }
+ /*
+ * U4 supports a DART bypass, we use it for 64-bit capable devices to
+ * improve performance. However, that only works for devices connected
+ * to the U4 own PCIe interface, not bridged through hypertransport.
+ * We need the device to support at least 40 bits of addresses.
+ */
controller_ops->dma_dev_setup = pci_dma_dev_setup_dart;
controller_ops->dma_bus_setup = pci_dma_bus_setup_dart;
+ controller_ops->iommu_bypass_supported = iommu_bypass_supported_dart;
/* Setup pci_dma ops */
set_pci_dma_ops(&dma_iommu_ops);
- return;
-
- bail:
- /* If init failed, use direct iommu and null setup functions */
- controller_ops->dma_dev_setup = NULL;
- controller_ops->dma_bus_setup = NULL;
-
- /* Setup pci_dma ops */
- set_pci_dma_ops(&dma_nommu_ops);
+ of_node_put(dn);
}
#ifdef CONFIG_PM
--
Gitblit v1.6.2