From d2ccde1c8e90d38cee87a1b0309ad2827f3fd30d Mon Sep 17 00:00:00 2001 From: hc <hc@nodka.com> Date: Mon, 11 Dec 2023 02:45:28 +0000 Subject: [PATCH] add boot partition size --- kernel/Documentation/devicetree/bindings/mtd/marvell-nand.txt | 14 +++++++------- 1 files changed, 7 insertions(+), 7 deletions(-) diff --git a/kernel/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/kernel/Documentation/devicetree/bindings/mtd/marvell-nand.txt index e0c7907..a2d9a0f 100644 --- a/kernel/Documentation/devicetree/bindings/mtd/marvell-nand.txt +++ b/kernel/Documentation/devicetree/bindings/mtd/marvell-nand.txt @@ -36,29 +36,29 @@ Required properties: - reg: shall contain the native Chip Select ids (0-3). -- nand-rb: see nand.txt (0-1). +- nand-rb: see nand-controller.yaml (0-1). Optional properties: - marvell,nand-keep-config: orders the driver not to take the timings from the core and leaving them completely untouched. Bootloader timings will then be used. - label: MTD name. -- nand-on-flash-bbt: see nand.txt. -- nand-ecc-mode: see nand.txt. Will use hardware ECC if not specified. -- nand-ecc-algo: see nand.txt. This property is essentially useful when +- nand-on-flash-bbt: see nand-controller.yaml. +- nand-ecc-mode: see nand-controller.yaml. Will use hardware ECC if not specified. +- nand-ecc-algo: see nand-controller.yaml. This property is essentially useful when not using hardware ECC. Howerver, it may be added when using hardware ECC for clarification but will be ignored by the driver because ECC mode is chosen depending on the page size and the strength required by the NAND chip. This value may be overwritten with nand-ecc-strength property. -- nand-ecc-strength: see nand.txt. -- nand-ecc-step-size: see nand.txt. Marvell's NAND flash controller does +- nand-ecc-strength: see nand-controller.yaml. +- nand-ecc-step-size: see nand-controller.yaml. Marvell's NAND flash controller does use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual step size will shrink or grow in order to fit the required strength. Step sizes are not completely random for all and follow certain patterns described in AN-379, "Marvell SoC NFC ECC". -See Documentation/devicetree/bindings/mtd/nand.txt for more details on +See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on generic bindings. -- Gitblit v1.6.2