From d2ccde1c8e90d38cee87a1b0309ad2827f3fd30d Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 11 Dec 2023 02:45:28 +0000
Subject: [PATCH] add boot partition size
---
kernel/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt | 18 ++++++++++--------
1 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/kernel/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
index b455c5a..cc51e47 100644
--- a/kernel/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
+++ b/kernel/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
@@ -9,14 +9,17 @@
- "amlogic,meson8-clkc" for Meson8 (S802) SoCs
- "amlogic,meson8b-clkc" for Meson8 (S805) SoCs
- "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
-- reg: it must be composed by two tuples:
- 0) physical base address of the xtal register and length of memory
- mapped region.
- 1) physical base address of the clock controller and length of memory
- mapped region.
-
- #clock-cells: should be 1.
- #reset-cells: should be 1.
+- clocks: list of clock phandles, one for each entry in clock-names
+- clock-names: should contain the following:
+ * "xtal": the 24MHz system oscillator
+ * "ddr_pll": the DDR PLL clock
+ * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN)
+
+Parent node should have the following properties :
+- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
+- reg: base address and size of the HHI system control register space.
Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. All available clocks are defined as
@@ -30,9 +33,8 @@
Example: Clock controller node:
- clkc: clock-controller@c1104000 {
+ clkc: clock-controller {
compatible = "amlogic,meson8b-clkc";
- reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
#clock-cells = <1>;
#reset-cells = <1>;
};
--
Gitblit v1.6.2