From cde9070d9970eef1f7ec2360586c802a16230ad8 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:43:50 +0000
Subject: [PATCH] rtl88x2CE_WiFi_linux driver
---
kernel/drivers/watchdog/iTCO_vendor_support.c | 189 ++++-------------------------------------------
1 files changed, 17 insertions(+), 172 deletions(-)
diff --git a/kernel/drivers/watchdog/iTCO_vendor_support.c b/kernel/drivers/watchdog/iTCO_vendor_support.c
index b6b2f90..cf0eaa0 100644
--- a/kernel/drivers/watchdog/iTCO_vendor_support.c
+++ b/kernel/drivers/watchdog/iTCO_vendor_support.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* intel TCO vendor specific watchdog driver support
*
* (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
*
* Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
* provide warranty for any of this software. This material is
@@ -38,16 +34,17 @@
/* List of vendor support modes */
/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
#define SUPERMICRO_OLD_BOARD 1
-/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
+/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems - no longer supported */
#define SUPERMICRO_NEW_BOARD 2
/* Broken BIOS */
#define BROKEN_BIOS 911
-static int vendorsupport;
-module_param(vendorsupport, int, 0);
+int iTCO_vendorsupport;
+EXPORT_SYMBOL(iTCO_vendorsupport);
+
+module_param_named(vendorsupport, iTCO_vendorsupport, int, 0);
MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default="
- "0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+, "
- "911=Broken SMI BIOS");
+ "0 (none), 1=SuperMicro Pent3, 911=Broken SMI BIOS");
/*
* Vendor Specific Support
@@ -95,143 +92,6 @@
val32 = inl(smires->start);
val32 |= 0x00002000; /* Turn on SMI clearing watchdog */
outl(val32, smires->start); /* Needed to deactivate watchdog */
-}
-
-/*
- * Vendor Support: 2
- * Board: Super Micro Computer Inc. P4SBx, P4DPx
- * iTCO chipset: ICH4
- *
- * Code contributed by: R. Seretny <lkpatches@paypc.com>
- * Documentation obtained by R. Seretny from SuperMicro Technical Support
- *
- * To enable Watchdog function:
- * 1. BIOS
- * For P4SBx:
- * BIOS setup -> Advanced -> Integrated Peripherals -> Watch Dog Feature
- * For P4DPx:
- * BIOS setup -> Advanced -> I/O Device Configuration -> Watch Dog
- * This setting enables or disables Watchdog function. When enabled, the
- * default watchdog timer is set to be 5 minutes (about 4m35s). It is
- * enough to load and run the OS. The application (service or driver) has
- * to take over the control once OS is running up and before watchdog
- * expires.
- *
- * 2. JUMPER
- * For P4SBx: JP39
- * For P4DPx: JP37
- * This jumper is used for safety. Closed is enabled. This jumper
- * prevents user enables watchdog in BIOS by accident.
- *
- * To enable Watch Dog function, both BIOS and JUMPER must be enabled.
- *
- * The documentation lists motherboards P4SBx and P4DPx series as of
- * 20-March-2002. However, this code works flawlessly with much newer
- * motherboards, such as my X6DHR-8G2 (SuperServer 6014H-82).
- *
- * The original iTCO driver as written does not actually reset the
- * watchdog timer on these machines, as a result they reboot after five
- * minutes.
- *
- * NOTE: You may leave the Watchdog function disabled in the SuperMicro
- * BIOS to avoid a "boot-race"... This driver will enable watchdog
- * functionality even if it's disabled in the BIOS once the /dev/watchdog
- * file is opened.
- */
-
-/* I/O Port's */
-#define SM_REGINDEX 0x2e /* SuperMicro ICH4+ Register Index */
-#define SM_DATAIO 0x2f /* SuperMicro ICH4+ Register Data I/O */
-
-/* Control Register's */
-#define SM_CTLPAGESW 0x07 /* SuperMicro ICH4+ Control Page Switch */
-#define SM_CTLPAGE 0x08 /* SuperMicro ICH4+ Control Page Num */
-
-#define SM_WATCHENABLE 0x30 /* Watchdog enable: Bit 0: 0=off, 1=on */
-
-#define SM_WATCHPAGE 0x87 /* Watchdog unlock control page */
-
-#define SM_ENDWATCH 0xAA /* Watchdog lock control page */
-
-#define SM_COUNTMODE 0xf5 /* Watchdog count mode select */
- /* (Bit 3: 0 = seconds, 1 = minutes */
-
-#define SM_WATCHTIMER 0xf6 /* 8-bits, Watchdog timer counter (RW) */
-
-#define SM_RESETCONTROL 0xf7 /* Watchdog reset control */
- /* Bit 6: timer is reset by kbd interrupt */
- /* Bit 7: timer is reset by mouse interrupt */
-
-static void supermicro_new_unlock_watchdog(void)
-{
- /* Write 0x87 to port 0x2e twice */
- outb(SM_WATCHPAGE, SM_REGINDEX);
- outb(SM_WATCHPAGE, SM_REGINDEX);
- /* Switch to watchdog control page */
- outb(SM_CTLPAGESW, SM_REGINDEX);
- outb(SM_CTLPAGE, SM_DATAIO);
-}
-
-static void supermicro_new_lock_watchdog(void)
-{
- outb(SM_ENDWATCH, SM_REGINDEX);
-}
-
-static void supermicro_new_pre_start(unsigned int heartbeat)
-{
- unsigned int val;
-
- supermicro_new_unlock_watchdog();
-
- /* Watchdog timer setting needs to be in seconds*/
- outb(SM_COUNTMODE, SM_REGINDEX);
- val = inb(SM_DATAIO);
- val &= 0xF7;
- outb(val, SM_DATAIO);
-
- /* Write heartbeat interval to WDOG */
- outb(SM_WATCHTIMER, SM_REGINDEX);
- outb((heartbeat & 255), SM_DATAIO);
-
- /* Make sure keyboard/mouse interrupts don't interfere */
- outb(SM_RESETCONTROL, SM_REGINDEX);
- val = inb(SM_DATAIO);
- val &= 0x3f;
- outb(val, SM_DATAIO);
-
- /* enable watchdog by setting bit 0 of Watchdog Enable to 1 */
- outb(SM_WATCHENABLE, SM_REGINDEX);
- val = inb(SM_DATAIO);
- val |= 0x01;
- outb(val, SM_DATAIO);
-
- supermicro_new_lock_watchdog();
-}
-
-static void supermicro_new_pre_stop(void)
-{
- unsigned int val;
-
- supermicro_new_unlock_watchdog();
-
- /* disable watchdog by setting bit 0 of Watchdog Enable to 0 */
- outb(SM_WATCHENABLE, SM_REGINDEX);
- val = inb(SM_DATAIO);
- val &= 0xFE;
- outb(val, SM_DATAIO);
-
- supermicro_new_lock_watchdog();
-}
-
-static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
-{
- supermicro_new_unlock_watchdog();
-
- /* reset watchdog timeout to heartveat value */
- outb(SM_WATCHTIMER, SM_REGINDEX);
- outb((heartbeat & 255), SM_DATAIO);
-
- supermicro_new_lock_watchdog();
}
/*
@@ -294,12 +154,9 @@
void iTCO_vendor_pre_start(struct resource *smires,
unsigned int heartbeat)
{
- switch (vendorsupport) {
+ switch (iTCO_vendorsupport) {
case SUPERMICRO_OLD_BOARD:
supermicro_old_pre_start(smires);
- break;
- case SUPERMICRO_NEW_BOARD:
- supermicro_new_pre_start(heartbeat);
break;
case BROKEN_BIOS:
broken_bios_start(smires);
@@ -310,12 +167,9 @@
void iTCO_vendor_pre_stop(struct resource *smires)
{
- switch (vendorsupport) {
+ switch (iTCO_vendorsupport) {
case SUPERMICRO_OLD_BOARD:
supermicro_old_pre_stop(smires);
- break;
- case SUPERMICRO_NEW_BOARD:
- supermicro_new_pre_stop();
break;
case BROKEN_BIOS:
broken_bios_stop(smires);
@@ -324,23 +178,9 @@
}
EXPORT_SYMBOL(iTCO_vendor_pre_stop);
-void iTCO_vendor_pre_keepalive(struct resource *smires, unsigned int heartbeat)
-{
- if (vendorsupport == SUPERMICRO_NEW_BOARD)
- supermicro_new_pre_set_heartbeat(heartbeat);
-}
-EXPORT_SYMBOL(iTCO_vendor_pre_keepalive);
-
-void iTCO_vendor_pre_set_heartbeat(unsigned int heartbeat)
-{
- if (vendorsupport == SUPERMICRO_NEW_BOARD)
- supermicro_new_pre_set_heartbeat(heartbeat);
-}
-EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat);
-
int iTCO_vendor_check_noreboot_on(void)
{
- switch (vendorsupport) {
+ switch (iTCO_vendorsupport) {
case SUPERMICRO_OLD_BOARD:
return 0;
default:
@@ -351,7 +191,13 @@
static int __init iTCO_vendor_init_module(void)
{
- pr_info("vendor-support=%d\n", vendorsupport);
+ if (iTCO_vendorsupport == SUPERMICRO_NEW_BOARD) {
+ pr_warn("Option vendorsupport=%d is no longer supported, "
+ "please use the w83627hf_wdt driver instead\n",
+ SUPERMICRO_NEW_BOARD);
+ return -EINVAL;
+ }
+ pr_info("vendor-support=%d\n", iTCO_vendorsupport);
return 0;
}
@@ -368,4 +214,3 @@
MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support");
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
-
--
Gitblit v1.6.2