From cde9070d9970eef1f7ec2360586c802a16230ad8 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:43:50 +0000
Subject: [PATCH] rtl88x2CE_WiFi_linux driver
---
kernel/drivers/tty/serial/8250/8250_ingenic.c | 49 +++++++++++++++++++++++++------------------------
1 files changed, 25 insertions(+), 24 deletions(-)
diff --git a/kernel/drivers/tty/serial/8250/8250_ingenic.c b/kernel/drivers/tty/serial/8250/8250_ingenic.c
index 15a8c8d..988bf6b 100644
--- a/kernel/drivers/tty/serial/8250/8250_ingenic.c
+++ b/kernel/drivers/tty/serial/8250/8250_ingenic.c
@@ -129,20 +129,19 @@
return 0;
}
-EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup);
OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart",
ingenic_early_console_setup);
-EARLYCON_DECLARE(jz4770_uart, ingenic_early_console_setup);
OF_EARLYCON_DECLARE(jz4770_uart, "ingenic,jz4770-uart",
ingenic_early_console_setup);
-EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup);
OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart",
ingenic_early_console_setup);
-EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup);
OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart",
+ ingenic_early_console_setup);
+
+OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart",
ingenic_early_console_setup);
static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
@@ -208,12 +207,11 @@
static int ingenic_uart_probe(struct platform_device *pdev)
{
struct uart_8250_port uart = {};
- struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
struct ingenic_uart_data *data;
const struct ingenic_uart_config *cdata;
const struct of_device_id *match;
- int err, line;
+ struct resource *regs;
+ int irq, err, line;
match = of_match_device(of_match, &pdev->dev);
if (!match) {
@@ -222,8 +220,13 @@
}
cdata = match->data;
- if (!regs || !irq) {
- dev_err(&pdev->dev, "no registers/irq defined\n");
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs) {
+ dev_err(&pdev->dev, "no registers defined\n");
return -EINVAL;
}
@@ -239,7 +242,7 @@
uart.port.regshift = 2;
uart.port.serial_out = ingenic_uart_serial_out;
uart.port.serial_in = ingenic_uart_serial_in;
- uart.port.irq = irq->start;
+ uart.port.irq = irq;
uart.port.dev = &pdev->dev;
uart.port.fifosize = cdata->fifosize;
uart.tx_loadsz = cdata->tx_loadsz;
@@ -256,22 +259,14 @@
return -ENOMEM;
data->clk_module = devm_clk_get(&pdev->dev, "module");
- if (IS_ERR(data->clk_module)) {
- err = PTR_ERR(data->clk_module);
- if (err != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "unable to get module clock: %d\n", err);
- return err;
- }
+ if (IS_ERR(data->clk_module))
+ return dev_err_probe(&pdev->dev, PTR_ERR(data->clk_module),
+ "unable to get module clock\n");
data->clk_baud = devm_clk_get(&pdev->dev, "baud");
- if (IS_ERR(data->clk_baud)) {
- err = PTR_ERR(data->clk_baud);
- if (err != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "unable to get baud clock: %d\n", err);
- return err;
- }
+ if (IS_ERR(data->clk_baud))
+ return dev_err_probe(&pdev->dev, PTR_ERR(data->clk_baud),
+ "unable to get baud clock\n");
err = clk_prepare_enable(data->clk_module);
if (err) {
@@ -328,12 +323,18 @@
.fifosize = 64,
};
+static const struct ingenic_uart_config x1000_uart_config = {
+ .tx_loadsz = 32,
+ .fifosize = 64,
+};
+
static const struct of_device_id of_match[] = {
{ .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config },
{ .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config },
{ .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config },
{ .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config },
{ .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config },
+ { .compatible = "ingenic,x1000-uart", .data = &x1000_uart_config },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, of_match);
--
Gitblit v1.6.2