From bedbef8ad3e75a304af6361af235302bcc61d06b Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 14 May 2024 06:39:01 +0000
Subject: [PATCH] 修改内核路径
---
kernel/drivers/pinctrl/intel/pinctrl-intel.h | 136 +++++++++++++++++++++++++++++++++++----------
1 files changed, 106 insertions(+), 30 deletions(-)
diff --git a/kernel/drivers/pinctrl/intel/pinctrl-intel.h b/kernel/drivers/pinctrl/intel/pinctrl-intel.h
index 1785abf..ad34b7a 100644
--- a/kernel/drivers/pinctrl/intel/pinctrl-intel.h
+++ b/kernel/drivers/pinctrl/intel/pinctrl-intel.h
@@ -10,7 +10,15 @@
#ifndef PINCTRL_INTEL_H
#define PINCTRL_INTEL_H
-struct pinctrl_pin_desc;
+#include <linux/bits.h>
+#include <linux/compiler_types.h>
+#include <linux/gpio/driver.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/pm.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/spinlock_types.h>
+
struct platform_device;
struct device;
@@ -25,10 +33,10 @@
*/
struct intel_pingroup {
const char *name;
- const unsigned *pins;
+ const unsigned int *pins;
size_t npins;
unsigned short mode;
- const unsigned *modes;
+ const unsigned int *modes;
};
/**
@@ -48,19 +56,31 @@
* @reg_num: GPI_IS register number
* @base: Starting pin of this group
* @size: Size of this group (maximum is 32).
- * @gpio_base: Starting GPIO base of this group (%0 if matches with @base,
- * and %-1 if no GPIO mapping should be created)
+ * @gpio_base: Starting GPIO base of this group
* @padown_num: PAD_OWN register number (assigned by the core driver)
*
* If pad groups of a community are not the same size, use this structure
* to specify them.
*/
struct intel_padgroup {
- unsigned reg_num;
- unsigned base;
- unsigned size;
+ unsigned int reg_num;
+ unsigned int base;
+ unsigned int size;
int gpio_base;
- unsigned padown_num;
+ unsigned int padown_num;
+};
+
+/**
+ * enum - Special treatment for GPIO base in pad group
+ *
+ * @INTEL_GPIO_BASE_ZERO: force GPIO base to be 0
+ * @INTEL_GPIO_BASE_NOMAP: no GPIO mapping should be created
+ * @INTEL_GPIO_BASE_MATCH: matches with starting pin number
+ */
+enum {
+ INTEL_GPIO_BASE_ZERO = -2,
+ INTEL_GPIO_BASE_NOMAP = -1,
+ INTEL_GPIO_BASE_MATCH = 0,
};
/**
@@ -73,42 +93,48 @@
* @hostown_offset: Register offset of HOSTSW_OWN from @regs. If %0 then it
* is assumed that the host owns the pin (rather than
* ACPI).
- * @is_offset: Register offset of GPI_IS from @regs. If %0 then uses the
- * default (%0x100).
+ * @is_offset: Register offset of GPI_IS from @regs.
* @ie_offset: Register offset of GPI_IE from @regs.
+ * @features: Additional features supported by the hardware
* @pin_base: Starting pin of pins in this community
+ * @npins: Number of pins in this community
* @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK,
- * HOSTSW_OWN, GPI_IS, GPI_IE, etc. Used when @gpps is %NULL.
+ * HOSTSW_OWN, GPI_IS, GPI_IE. Used when @gpps is %NULL.
* @gpp_num_padown_regs: Number of pad registers each pad group consumes at
* minimum. Use %0 if the number of registers can be
* determined by the size of the group.
- * @npins: Number of pins in this community
- * @features: Additional features supported by the hardware
* @gpps: Pad groups if the controller has variable size pad groups
* @ngpps: Number of pad groups in this community
+ * @pad_map: Optional non-linear mapping of the pads
+ * @nirqs: Optional total number of IRQs this community can generate
+ * @acpi_space_id: Optional address space ID for ACPI OpRegion handler
* @regs: Community specific common registers (reserved for core driver)
* @pad_regs: Community specific pad registers (reserved for core driver)
*
- * Most Intel GPIO host controllers this driver supports each pad group is
- * of equal size (except the last one). In that case the driver can just
+ * In some of Intel GPIO host controllers this driver supports each pad group
+ * is of equal size (except the last one). In that case the driver can just
* fill in @gpp_size field and let the core driver to handle the rest. If
* the controller has pad groups of variable size the client driver can
* pass custom @gpps and @ngpps instead.
*/
struct intel_community {
- unsigned barno;
- unsigned padown_offset;
- unsigned padcfglock_offset;
- unsigned hostown_offset;
- unsigned is_offset;
- unsigned ie_offset;
- unsigned pin_base;
- unsigned gpp_size;
- unsigned gpp_num_padown_regs;
+ unsigned int barno;
+ unsigned int padown_offset;
+ unsigned int padcfglock_offset;
+ unsigned int hostown_offset;
+ unsigned int is_offset;
+ unsigned int ie_offset;
+ unsigned int features;
+ unsigned int pin_base;
size_t npins;
- unsigned features;
+ unsigned int gpp_size;
+ unsigned int gpp_num_padown_regs;
const struct intel_padgroup *gpps;
size_t ngpps;
+ const unsigned int *pad_map;
+ unsigned short nirqs;
+ unsigned short acpi_space_id;
+
/* Reserved for the core driver */
void __iomem *regs;
void __iomem *pad_regs;
@@ -171,11 +197,61 @@
size_t ncommunities;
};
-int intel_pinctrl_probe(struct platform_device *pdev,
- const struct intel_pinctrl_soc_data *soc_data);
+const struct intel_pinctrl_soc_data *intel_pinctrl_get_soc_data(struct platform_device *pdev);
+
+struct intel_pad_context;
+struct intel_community_context;
+
+/**
+ * struct intel_pinctrl_context - context to be saved during suspend-resume
+ * @pads: Opaque context per pad (driver dependent)
+ * @communities: Opaque context per community (driver dependent)
+ */
+struct intel_pinctrl_context {
+ struct intel_pad_context *pads;
+ struct intel_community_context *communities;
+};
+
+/**
+ * struct intel_pinctrl - Intel pinctrl private structure
+ * @dev: Pointer to the device structure
+ * @lock: Lock to serialize register access
+ * @pctldesc: Pin controller description
+ * @pctldev: Pointer to the pin controller device
+ * @chip: GPIO chip in this pin controller
+ * @irqchip: IRQ chip in this pin controller
+ * @soc: SoC/PCH specific pin configuration data
+ * @communities: All communities in this pin controller
+ * @ncommunities: Number of communities in this pin controller
+ * @context: Configuration saved over system sleep
+ * @irq: pinctrl/GPIO chip irq number
+ */
+struct intel_pinctrl {
+ struct device *dev;
+ raw_spinlock_t lock;
+ struct pinctrl_desc pctldesc;
+ struct pinctrl_dev *pctldev;
+ struct gpio_chip chip;
+ struct irq_chip irqchip;
+ const struct intel_pinctrl_soc_data *soc;
+ struct intel_community *communities;
+ size_t ncommunities;
+ struct intel_pinctrl_context context;
+ int irq;
+};
+
+int intel_pinctrl_probe_by_hid(struct platform_device *pdev);
+int intel_pinctrl_probe_by_uid(struct platform_device *pdev);
+
#ifdef CONFIG_PM_SLEEP
-int intel_pinctrl_suspend(struct device *dev);
-int intel_pinctrl_resume(struct device *dev);
+int intel_pinctrl_suspend_noirq(struct device *dev);
+int intel_pinctrl_resume_noirq(struct device *dev);
#endif
+#define INTEL_PINCTRL_PM_OPS(_name) \
+const struct dev_pm_ops _name = { \
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(intel_pinctrl_suspend_noirq, \
+ intel_pinctrl_resume_noirq) \
+}
+
#endif /* PINCTRL_INTEL_H */
--
Gitblit v1.6.2