From bedbef8ad3e75a304af6361af235302bcc61d06b Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 14 May 2024 06:39:01 +0000
Subject: [PATCH] 修改内核路径
---
kernel/drivers/net/phy/bcm-phy-lib.c | 429 +++++++++++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 410 insertions(+), 19 deletions(-)
diff --git a/kernel/drivers/net/phy/bcm-phy-lib.c b/kernel/drivers/net/phy/bcm-phy-lib.c
index 7e58925..b72e11c 100644
--- a/kernel/drivers/net/phy/bcm-phy-lib.c
+++ b/kernel/drivers/net/phy/bcm-phy-lib.c
@@ -1,55 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2015-2017 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include "bcm-phy-lib.h"
+#include <linux/bitfield.h>
#include <linux/brcmphy.h>
#include <linux/export.h>
#include <linux/mdio.h>
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/ethtool.h>
+#include <linux/ethtool_netlink.h>
#define MII_BCM_CHANNEL_WIDTH 0x2000
#define BCM_CL45VEN_EEE_ADV 0x3c
+
+int __bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val)
+{
+ int rc;
+
+ rc = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+ if (rc < 0)
+ return rc;
+
+ return __phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_write_exp);
int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val)
{
int rc;
- rc = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
- if (rc < 0)
- return rc;
+ phy_lock_mdio_bus(phydev);
+ rc = __bcm_phy_write_exp(phydev, reg, val);
+ phy_unlock_mdio_bus(phydev);
- return phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
+ return rc;
}
EXPORT_SYMBOL_GPL(bcm_phy_write_exp);
-int bcm_phy_read_exp(struct phy_device *phydev, u16 reg)
+int __bcm_phy_read_exp(struct phy_device *phydev, u16 reg)
{
int val;
- val = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+ val = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
if (val < 0)
return val;
- val = phy_read(phydev, MII_BCM54XX_EXP_DATA);
+ val = __phy_read(phydev, MII_BCM54XX_EXP_DATA);
/* Restore default value. It's O.K. if this write fails. */
- phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
+ __phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
return val;
}
+EXPORT_SYMBOL_GPL(__bcm_phy_read_exp);
+
+int bcm_phy_read_exp(struct phy_device *phydev, u16 reg)
+{
+ int rc;
+
+ phy_lock_mdio_bus(phydev);
+ rc = __bcm_phy_read_exp(phydev, reg);
+ phy_unlock_mdio_bus(phydev);
+
+ return rc;
+}
EXPORT_SYMBOL_GPL(bcm_phy_read_exp);
+
+int __bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set)
+{
+ int new, ret;
+
+ ret = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = __phy_read(phydev, MII_BCM54XX_EXP_DATA);
+ if (ret < 0)
+ return ret;
+
+ new = (ret & ~mask) | set;
+ if (new == ret)
+ return 0;
+
+ return __phy_write(phydev, MII_BCM54XX_EXP_DATA, new);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_modify_exp);
+
+int bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set)
+{
+ int ret;
+
+ phy_lock_mdio_bus(phydev);
+ ret = __bcm_phy_modify_exp(phydev, reg, mask, set);
+ phy_unlock_mdio_bus(phydev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_modify_exp);
int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum)
{
@@ -163,6 +213,86 @@
}
EXPORT_SYMBOL_GPL(bcm_phy_write_shadow);
+int __bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb)
+{
+ int val;
+
+ val = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+ if (val < 0)
+ return val;
+
+ return __phy_read(phydev, MII_BCM54XX_RDB_DATA);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_read_rdb);
+
+int bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb)
+{
+ int ret;
+
+ phy_lock_mdio_bus(phydev);
+ ret = __bcm_phy_read_rdb(phydev, rdb);
+ phy_unlock_mdio_bus(phydev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_rdb);
+
+int __bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val)
+{
+ int ret;
+
+ ret = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+ if (ret < 0)
+ return ret;
+
+ return __phy_write(phydev, MII_BCM54XX_RDB_DATA, val);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_write_rdb);
+
+int bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val)
+{
+ int ret;
+
+ phy_lock_mdio_bus(phydev);
+ ret = __bcm_phy_write_rdb(phydev, rdb, val);
+ phy_unlock_mdio_bus(phydev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_rdb);
+
+int __bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, u16 set)
+{
+ int new, ret;
+
+ ret = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+ if (ret < 0)
+ return ret;
+
+ ret = __phy_read(phydev, MII_BCM54XX_RDB_DATA);
+ if (ret < 0)
+ return ret;
+
+ new = (ret & ~mask) | set;
+ if (new == ret)
+ return 0;
+
+ return __phy_write(phydev, MII_BCM54XX_RDB_DATA, new);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_modify_rdb);
+
+int bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, u16 set)
+{
+ int ret;
+
+ phy_lock_mdio_bus(phydev);
+ ret = __bcm_phy_modify_rdb(phydev, rdb, mask, set);
+ phy_unlock_mdio_bus(phydev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_modify_rdb);
+
int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down)
{
int val;
@@ -217,9 +347,11 @@
if (val < 0)
return val;
- if (phydev->supported & SUPPORTED_1000baseT_Full)
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ phydev->supported))
mask |= MDIO_EEE_1000T;
- if (phydev->supported & SUPPORTED_100baseT_Full)
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ phydev->supported))
mask |= MDIO_EEE_100TX;
if (enable)
@@ -384,6 +516,265 @@
}
EXPORT_SYMBOL_GPL(bcm_phy_get_stats);
+void bcm_phy_r_rc_cal_reset(struct phy_device *phydev)
+{
+ /* Reset R_CAL/RC_CAL Engine */
+ bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010);
+
+ /* Disable Reset R_AL/RC_CAL Engine */
+ bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_r_rc_cal_reset);
+
+int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev)
+{
+ /* Increase VCO range to prevent unlocking problem of PLL at low
+ * temp
+ */
+ bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
+
+ /* Change Ki to 011 */
+ bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
+
+ /* Disable loading of TVCO buffer to bandgap, set bandgap trim
+ * to 111
+ */
+ bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
+
+ /* Adjust bias current trim by -3 */
+ bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
+
+ /* Switch to CORE_BASE1E */
+ phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);
+
+ bcm_phy_r_rc_cal_reset(phydev);
+
+ /* write AFE_RXCONFIG_0 */
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
+
+ /* write AFE_RXCONFIG_1 */
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
+
+ /* write AFE_RX_LP_COUNTER */
+ bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+
+ /* write AFE_HPF_TRIM_OTHERS */
+ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
+
+ /* write AFTE_TX_CONFIG */
+ bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_28nm_a0b0_afe_config_init);
+
+int bcm_phy_enable_jumbo(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL);
+ if (ret < 0)
+ return ret;
+
+ /* Enable extended length packet reception */
+ ret = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+ ret | MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN);
+ if (ret < 0)
+ return ret;
+
+ /* Enable the elastic FIFO for raising the transmission limit from
+ * 4.5KB to 10KB, at the expense of an additional 16 ns in propagation
+ * latency.
+ */
+ return phy_set_bits(phydev, MII_BCM54XX_ECR, MII_BCM54XX_ECR_FIFOE);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_enable_jumbo);
+
+static int __bcm_phy_enable_rdb_access(struct phy_device *phydev)
+{
+ return __bcm_phy_write_exp(phydev, BCM54XX_EXP_REG7E, 0);
+}
+
+static int __bcm_phy_enable_legacy_access(struct phy_device *phydev)
+{
+ return __bcm_phy_write_rdb(phydev, BCM54XX_RDB_REG0087,
+ BCM54XX_ACCESS_MODE_LEGACY_EN);
+}
+
+static int _bcm_phy_cable_test_start(struct phy_device *phydev, bool is_rdb)
+{
+ u16 mask, set;
+ int ret;
+
+ /* Auto-negotiation must be enabled for cable diagnostics to work, but
+ * don't advertise any capabilities.
+ */
+ phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
+ phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA);
+ phy_write(phydev, MII_CTRL1000, 0);
+
+ phy_lock_mdio_bus(phydev);
+ if (is_rdb) {
+ ret = __bcm_phy_enable_legacy_access(phydev);
+ if (ret)
+ goto out;
+ }
+
+ mask = BCM54XX_ECD_CTRL_CROSS_SHORT_DIS | BCM54XX_ECD_CTRL_UNIT_MASK;
+ set = BCM54XX_ECD_CTRL_RUN | BCM54XX_ECD_CTRL_BREAK_LINK |
+ FIELD_PREP(BCM54XX_ECD_CTRL_UNIT_MASK,
+ BCM54XX_ECD_CTRL_UNIT_CM);
+
+ ret = __bcm_phy_modify_exp(phydev, BCM54XX_EXP_ECD_CTRL, mask, set);
+
+out:
+ /* re-enable the RDB access even if there was an error */
+ if (is_rdb)
+ ret = __bcm_phy_enable_rdb_access(phydev) ? : ret;
+
+ phy_unlock_mdio_bus(phydev);
+
+ return ret;
+}
+
+static int bcm_phy_cable_test_report_trans(int result)
+{
+ switch (result) {
+ case BCM54XX_ECD_FAULT_TYPE_OK:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+ case BCM54XX_ECD_FAULT_TYPE_OPEN:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+ case BCM54XX_ECD_FAULT_TYPE_SAME_SHORT:
+ return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+ case BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT:
+ return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
+ case BCM54XX_ECD_FAULT_TYPE_INVALID:
+ case BCM54XX_ECD_FAULT_TYPE_BUSY:
+ default:
+ return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+ }
+}
+
+static bool bcm_phy_distance_valid(int result)
+{
+ switch (result) {
+ case BCM54XX_ECD_FAULT_TYPE_OPEN:
+ case BCM54XX_ECD_FAULT_TYPE_SAME_SHORT:
+ case BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT:
+ return true;
+ }
+ return false;
+}
+
+static int bcm_phy_report_length(struct phy_device *phydev, int pair)
+{
+ int val;
+
+ val = __bcm_phy_read_exp(phydev,
+ BCM54XX_EXP_ECD_PAIR_A_LENGTH_RESULTS + pair);
+ if (val < 0)
+ return val;
+
+ if (val == BCM54XX_ECD_LENGTH_RESULTS_INVALID)
+ return 0;
+
+ ethnl_cable_test_fault_length(phydev, pair, val);
+
+ return 0;
+}
+
+static int _bcm_phy_cable_test_get_status(struct phy_device *phydev,
+ bool *finished, bool is_rdb)
+{
+ int pair_a, pair_b, pair_c, pair_d, ret;
+
+ *finished = false;
+
+ phy_lock_mdio_bus(phydev);
+
+ if (is_rdb) {
+ ret = __bcm_phy_enable_legacy_access(phydev);
+ if (ret)
+ goto out;
+ }
+
+ ret = __bcm_phy_read_exp(phydev, BCM54XX_EXP_ECD_CTRL);
+ if (ret < 0)
+ goto out;
+
+ if (ret & BCM54XX_ECD_CTRL_IN_PROGRESS) {
+ ret = 0;
+ goto out;
+ }
+
+ ret = __bcm_phy_read_exp(phydev, BCM54XX_EXP_ECD_FAULT_TYPE);
+ if (ret < 0)
+ goto out;
+
+ pair_a = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_A_MASK, ret);
+ pair_b = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_B_MASK, ret);
+ pair_c = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_C_MASK, ret);
+ pair_d = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_D_MASK, ret);
+
+ ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+ bcm_phy_cable_test_report_trans(pair_a));
+ ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
+ bcm_phy_cable_test_report_trans(pair_b));
+ ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C,
+ bcm_phy_cable_test_report_trans(pair_c));
+ ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
+ bcm_phy_cable_test_report_trans(pair_d));
+
+ if (bcm_phy_distance_valid(pair_a))
+ bcm_phy_report_length(phydev, 0);
+ if (bcm_phy_distance_valid(pair_b))
+ bcm_phy_report_length(phydev, 1);
+ if (bcm_phy_distance_valid(pair_c))
+ bcm_phy_report_length(phydev, 2);
+ if (bcm_phy_distance_valid(pair_d))
+ bcm_phy_report_length(phydev, 3);
+
+ ret = 0;
+ *finished = true;
+out:
+ /* re-enable the RDB access even if there was an error */
+ if (is_rdb)
+ ret = __bcm_phy_enable_rdb_access(phydev) ? : ret;
+
+ phy_unlock_mdio_bus(phydev);
+
+ return ret;
+}
+
+int bcm_phy_cable_test_start(struct phy_device *phydev)
+{
+ return _bcm_phy_cable_test_start(phydev, false);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_cable_test_start);
+
+int bcm_phy_cable_test_get_status(struct phy_device *phydev, bool *finished)
+{
+ return _bcm_phy_cable_test_get_status(phydev, finished, false);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status);
+
+/* We assume that all PHYs which support RDB access can be switched to legacy
+ * mode. If, in the future, this is not true anymore, we have to re-implement
+ * this with RDB access.
+ */
+int bcm_phy_cable_test_start_rdb(struct phy_device *phydev)
+{
+ return _bcm_phy_cable_test_start(phydev, true);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_cable_test_start_rdb);
+
+int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev,
+ bool *finished)
+{
+ return _bcm_phy_cable_test_get_status(phydev, finished, true);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status_rdb);
+
MODULE_DESCRIPTION("Broadcom PHY Library");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Broadcom Corporation");
--
Gitblit v1.6.2