From bedbef8ad3e75a304af6361af235302bcc61d06b Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 14 May 2024 06:39:01 +0000
Subject: [PATCH] 修改内核路径
---
kernel/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 53 +++++++++++++++++++++++++++++++++++++++++++++--------
1 files changed, 45 insertions(+), 8 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/kernel/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index d64f97d..106397a 100644
--- a/kernel/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/kernel/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG Exynos5433 TM2 board device tree source
+ * Samsung Exynos5433 TM2 board device tree source
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
*
@@ -87,8 +87,8 @@
i2c_max98504: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
- &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
+ sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
@@ -289,6 +289,12 @@
assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
};
+&cmu_mif {
+ assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>;
+ assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>;
+ assigned-clock-rates = <0>, <333000000>;
+};
+
&cmu_mscl {
assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
<&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
@@ -342,6 +348,11 @@
samsung,pll-clock-frequency = <24000000>;
pinctrl-names = "default";
pinctrl-0 = <&te_irq>;
+};
+
+&gpu {
+ mali-supply = <&buck6_reg>;
+ status = "okay";
};
&hdmi {
@@ -784,8 +795,8 @@
reg = <0x27>;
interrupt-parent = <&gpa1>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
- s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
- s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+ en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
};
};
@@ -868,6 +879,14 @@
};
};
};
+
+ ports {
+ port {
+ muic_to_usb: endpoint {
+ remote-endpoint = <&usb_to_muic>;
+ };
+ };
+ };
};
regulators {
@@ -939,8 +958,7 @@
status = "okay";
cap-sd-highspeed;
disable-wp;
- cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
@@ -1195,6 +1213,20 @@
status = "okay";
};
+&serial_3 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <3000000>;
+ shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>;
+ clocks = <&s2mps13_osc S2MPS11_CLK_BT>;
+ clock-names = "extclk";
+ };
+};
+
&spi_1 {
cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
status = "okay";
@@ -1283,12 +1315,17 @@
&usbdrd_dwc3 {
dr_mode = "otg";
- extcon = <&muic>;
};
&usbdrd30_phy {
vbus-supply = <&safeout1_reg>;
status = "okay";
+
+ port {
+ usb_to_muic: endpoint {
+ remote-endpoint = <&muic_to_usb>;
+ };
+ };
};
&xxti {
--
Gitblit v1.6.2