From b22da3d8526a935aa31e086e63f60ff3246cb61c Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 07:24:11 +0000
Subject: [PATCH] add stmac read mac form eeprom
---
kernel/drivers/usb/gadget/function/u_serial.c | 529 +++++++++++++++++++++++++++++++++-------------------------
1 files changed, 304 insertions(+), 225 deletions(-)
diff --git a/kernel/drivers/usb/gadget/function/u_serial.c b/kernel/drivers/usb/gadget/function/u_serial.c
index 9c6731b..1e59204 100644
--- a/kernel/drivers/usb/gadget/function/u_serial.c
+++ b/kernel/drivers/usb/gadget/function/u_serial.c
@@ -16,7 +16,6 @@
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/tty.h>
@@ -26,6 +25,7 @@
#include <linux/module.h>
#include <linux/console.h>
#include <linux/kthread.h>
+#include <linux/workqueue.h>
#include <linux/kfifo.h>
#include "u_serial.h"
@@ -82,14 +82,13 @@
#define GS_CONSOLE_BUF_SIZE 8192
/* console info */
-struct gscons_info {
- struct gs_port *port;
- struct task_struct *console_thread;
- struct kfifo con_buf;
- /* protect the buf and busy flag */
- spinlock_t con_lock;
- int req_busy;
- struct usb_request *console_req;
+struct gs_console {
+ struct console console;
+ struct work_struct work;
+ spinlock_t lock;
+ struct usb_request *req;
+ struct kfifo buf;
+ size_t missed;
};
/*
@@ -101,6 +100,9 @@
spinlock_t port_lock; /* guard port_* access */
struct gserial *port_usb;
+#ifdef CONFIG_U_SERIAL_CONSOLE
+ struct gs_console *console;
+#endif
u8 port_num;
@@ -109,7 +111,7 @@
int read_allocated;
struct list_head read_queue;
unsigned n_read;
- struct tasklet_struct push;
+ struct delayed_work push;
struct list_head write_pool;
int write_started;
@@ -118,6 +120,8 @@
wait_queue_head_t drain_wait; /* wait while writes drain */
bool write_busy;
wait_queue_head_t close_wait;
+ bool suspended; /* port suspended */
+ bool start_delayed; /* delay start when suspended */
/* REVISIT this state ... */
struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
@@ -254,9 +258,7 @@
list_del(&req->list);
req->zero = kfifo_is_empty(&port->port_write_buf);
- pr_vdebug("ttyGS%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
- port->port_num, len, *((u8 *)req->buf),
- *((u8 *)req->buf+1), *((u8 *)req->buf+2));
+ pr_vdebug("ttyGS%d: tx len=%d, %3ph ...\n", port->port_num, len, req->buf);
/* Drop lock while we call out of driver; completions
* could be issued while we do so. Disconnection may
@@ -342,7 +344,7 @@
}
/*
- * RX tasklet takes data out of the RX queue and hands it up to the TTY
+ * RX work takes data out of the RX queue and hands it up to the TTY
* layer until it refuses to take any more data (or is throttled back).
* Then it issues reads for any further data.
*
@@ -351,9 +353,10 @@
* So QUEUE_SIZE packets plus however many the FIFO holds (usually two)
* can be buffered before the TTY layer's buffers (currently 64 KB).
*/
-static void gs_rx_push(unsigned long _port)
+static void gs_rx_push(struct work_struct *work)
{
- struct gs_port *port = (void *)_port;
+ struct delayed_work *w = to_delayed_work(work);
+ struct gs_port *port = container_of(w, struct gs_port, push);
struct tty_struct *tty;
struct list_head *queue = &port->read_queue;
bool disconnect = false;
@@ -381,7 +384,7 @@
/* presumably a transient fault */
pr_warn("ttyGS%d: unexpected RX status %d\n",
port->port_num, req->status);
- /* FALLTHROUGH */
+ fallthrough;
case 0:
/* normal completion */
break;
@@ -428,21 +431,13 @@
/* We want our data queue to become empty ASAP, keeping data
* in the tty and ldisc (not here). If we couldn't push any
- * this time around, there may be trouble unless there's an
- * implicit tty_unthrottle() call on its way...
+ * this time around, RX may be starved, so wait until next jiffy.
*
- * REVISIT we should probably add a timer to keep the tasklet
- * from starving ... but it's not clear that case ever happens.
+ * We may leave non-empty queue only when there is a tty, and
+ * either it is throttled or there is no more room in flip buffer.
*/
- if (!list_empty(queue) && tty) {
- if (!tty_throttled(tty)) {
- if (do_push)
- tasklet_schedule(&port->push);
- else
- pr_warn("ttyGS%d: RX not scheduled?\n",
- port->port_num);
- }
- }
+ if (!list_empty(queue) && !tty_throttled(tty))
+ schedule_delayed_work(&port->push, 1);
/* If we're still connected, refill the USB RX queue. */
if (!disconnect && port->port_usb)
@@ -458,7 +453,7 @@
/* Queue all received data until the tty layer is ready for it. */
spin_lock(&port->port_lock);
list_add_tail(&req->list, &port->read_queue);
- tasklet_schedule(&port->push);
+ schedule_delayed_work(&port->push, 0);
spin_unlock(&port->port_lock);
}
@@ -475,7 +470,7 @@
/* presumably a transient fault */
pr_warn("%s: unexpected %s status %d\n",
__func__, ep->name, req->status);
- /* FALL THROUGH */
+ fallthrough;
case 0:
/* normal completion */
gs_start_tx(port);
@@ -530,7 +525,7 @@
/**
* gs_start_io - start USB I/O streams
- * @dev: encapsulates endpoints to use
+ * @port: port to use
* Context: holding port_lock; port_tty and port_usb are non-null
*
* We only start I/O when something is connected to both sides of
@@ -635,13 +630,19 @@
/* if connected, start the I/O stream */
if (port->port_usb) {
- struct gserial *gser = port->port_usb;
+ /* if port is suspended, wait resume to start I/0 stream */
+ if (!port->suspended) {
+ struct gserial *gser = port->port_usb;
- pr_debug("gs_open: start ttyGS%d\n", port->port_num);
- gs_start_io(port);
+ pr_debug("gs_open: start ttyGS%d\n", port->port_num);
+ gs_start_io(port);
- if (gser->connect)
- gser->connect(gser);
+ if (gser->connect)
+ gser->connect(gser);
+ } else {
+ pr_debug("delay start of ttyGS%d\n", port->port_num);
+ port->start_delayed = true;
+ }
}
pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file);
@@ -685,7 +686,7 @@
pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file);
gser = port->port_usb;
- if (gser && gser->disconnect)
+ if (gser && !port->suspended && gser->disconnect)
gser->disconnect(gser);
/* wait for circular write buffer to drain, disconnect, or at
@@ -706,13 +707,14 @@
/* Iff we're disconnected, there can be no I/O in flight so it's
* ok to free the circular buffer; else just scrub it. And don't
- * let the push tasklet fire again until we're re-opened.
+ * let the push async work fire again until we're re-opened.
*/
if (gser == NULL)
kfifo_free(&port->port_write_buf);
else
kfifo_reset(&port->port_write_buf);
+ port->start_delayed = false;
port->port.count = 0;
port->port.tty = NULL;
@@ -817,8 +819,8 @@
* rts/cts, or other handshaking with the host, but if the
* read queue backs up enough we'll be NAKing OUT packets.
*/
- tasklet_schedule(&port->push);
pr_vdebug("ttyGS%d: unthrottle\n", port->port_num);
+ schedule_delayed_work(&port->push, 0);
}
spin_unlock_irqrestore(&port->port_lock, flags);
}
@@ -859,50 +861,23 @@
#ifdef CONFIG_U_SERIAL_CONSOLE
-static struct gscons_info gscons_info;
-static struct console gserial_cons;
-
-static struct usb_request *gs_request_new(struct usb_ep *ep)
+static void gs_console_complete_out(struct usb_ep *ep, struct usb_request *req)
{
- struct usb_request *req = usb_ep_alloc_request(ep, GFP_ATOMIC);
- if (!req)
- return NULL;
-
- req->buf = kmalloc(ep->maxpacket, GFP_ATOMIC);
- if (!req->buf) {
- usb_ep_free_request(ep, req);
- return NULL;
- }
-
- return req;
-}
-
-static void gs_request_free(struct usb_request *req, struct usb_ep *ep)
-{
- if (!req)
- return;
-
- kfree(req->buf);
- usb_ep_free_request(ep, req);
-}
-
-static void gs_complete_out(struct usb_ep *ep, struct usb_request *req)
-{
- struct gscons_info *info = &gscons_info;
+ struct gs_console *cons = req->context;
switch (req->status) {
default:
pr_warn("%s: unexpected %s status %d\n",
__func__, ep->name, req->status);
- /* fall through */
+ fallthrough;
case 0:
/* normal completion */
- spin_lock(&info->con_lock);
- info->req_busy = 0;
- spin_unlock(&info->con_lock);
-
- wake_up_process(info->console_thread);
+ spin_lock(&cons->lock);
+ req->length = 0;
+ schedule_work(&cons->work);
+ spin_unlock(&cons->lock);
break;
+ case -ECONNRESET:
case -ESHUTDOWN:
/* disconnect */
pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
@@ -910,190 +885,250 @@
}
}
-static int gs_console_connect(int port_num)
+static void __gs_console_push(struct gs_console *cons)
{
- struct gscons_info *info = &gscons_info;
- struct gs_port *port;
+ struct usb_request *req = cons->req;
struct usb_ep *ep;
+ size_t size;
- if (port_num != gserial_cons.index) {
- pr_err("%s: port num [%d] is not support console\n",
- __func__, port_num);
- return -ENXIO;
+ if (!req)
+ return; /* disconnected */
+
+ if (req->length)
+ return; /* busy */
+
+ ep = cons->console.data;
+ size = kfifo_out(&cons->buf, req->buf, ep->maxpacket);
+ if (!size)
+ return;
+
+ if (cons->missed && ep->maxpacket >= 64) {
+ char buf[64];
+ size_t len;
+
+ len = sprintf(buf, "\n[missed %zu bytes]\n", cons->missed);
+ kfifo_in(&cons->buf, buf, len);
+ cons->missed = 0;
}
- port = ports[port_num].port;
- ep = port->port_usb->in;
- if (!info->console_req) {
- info->console_req = gs_request_new(ep);
- if (!info->console_req)
- return -ENOMEM;
- info->console_req->complete = gs_complete_out;
- }
-
- info->port = port;
- spin_lock(&info->con_lock);
- info->req_busy = 0;
- spin_unlock(&info->con_lock);
- pr_vdebug("port[%d] console connect!\n", port_num);
- return 0;
+ req->length = size;
+ if (usb_ep_queue(ep, req, GFP_ATOMIC))
+ req->length = 0;
}
-static void gs_console_disconnect(struct usb_ep *ep)
+static void gs_console_work(struct work_struct *work)
{
- struct gscons_info *info = &gscons_info;
- struct usb_request *req = info->console_req;
+ struct gs_console *cons = container_of(work, struct gs_console, work);
- gs_request_free(req, ep);
- info->console_req = NULL;
-}
+ spin_lock_irq(&cons->lock);
-static int gs_console_thread(void *data)
-{
- struct gscons_info *info = &gscons_info;
- struct gs_port *port;
- struct usb_request *req;
- struct usb_ep *ep;
- int xfer, ret, count, size;
+ __gs_console_push(cons);
- do {
- port = info->port;
- set_current_state(TASK_INTERRUPTIBLE);
- if (!port || !port->port_usb
- || !port->port_usb->in || !info->console_req)
- goto sched;
-
- req = info->console_req;
- ep = port->port_usb->in;
-
- spin_lock_irq(&info->con_lock);
- count = kfifo_len(&info->con_buf);
- size = ep->maxpacket;
-
- if (count > 0 && !info->req_busy) {
- set_current_state(TASK_RUNNING);
- if (count < size)
- size = count;
-
- xfer = kfifo_out(&info->con_buf, req->buf, size);
- req->length = xfer;
-
- spin_unlock(&info->con_lock);
- ret = usb_ep_queue(ep, req, GFP_ATOMIC);
- spin_lock(&info->con_lock);
- if (ret < 0)
- info->req_busy = 0;
- else
- info->req_busy = 1;
-
- spin_unlock_irq(&info->con_lock);
- } else {
- spin_unlock_irq(&info->con_lock);
-sched:
- if (kthread_should_stop()) {
- set_current_state(TASK_RUNNING);
- break;
- }
- schedule();
- }
- } while (1);
-
- return 0;
-}
-
-static int gs_console_setup(struct console *co, char *options)
-{
- struct gscons_info *info = &gscons_info;
- int status;
-
- info->port = NULL;
- info->console_req = NULL;
- info->req_busy = 0;
- spin_lock_init(&info->con_lock);
-
- status = kfifo_alloc(&info->con_buf, GS_CONSOLE_BUF_SIZE, GFP_KERNEL);
- if (status) {
- pr_err("%s: allocate console buffer failed\n", __func__);
- return status;
- }
-
- info->console_thread = kthread_create(gs_console_thread,
- co, "gs_console");
- if (IS_ERR(info->console_thread)) {
- pr_err("%s: cannot create console thread\n", __func__);
- kfifo_free(&info->con_buf);
- return PTR_ERR(info->console_thread);
- }
- wake_up_process(info->console_thread);
-
- return 0;
+ spin_unlock_irq(&cons->lock);
}
static void gs_console_write(struct console *co,
const char *buf, unsigned count)
{
- struct gscons_info *info = &gscons_info;
+ struct gs_console *cons = container_of(co, struct gs_console, console);
unsigned long flags;
+ size_t n;
- spin_lock_irqsave(&info->con_lock, flags);
- kfifo_in(&info->con_buf, buf, count);
- spin_unlock_irqrestore(&info->con_lock, flags);
+ spin_lock_irqsave(&cons->lock, flags);
- wake_up_process(info->console_thread);
+ n = kfifo_in(&cons->buf, buf, count);
+ if (n < count)
+ cons->missed += count - n;
+
+ if (cons->req && !cons->req->length)
+ schedule_work(&cons->work);
+
+ spin_unlock_irqrestore(&cons->lock, flags);
}
static struct tty_driver *gs_console_device(struct console *co, int *index)
{
- struct tty_driver **p = (struct tty_driver **)co->data;
-
- if (!*p)
- return NULL;
-
*index = co->index;
- return *p;
+ return gs_tty_driver;
}
-static struct console gserial_cons = {
- .name = "ttyGS",
- .write = gs_console_write,
- .device = gs_console_device,
- .setup = gs_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &gs_tty_driver,
-};
-
-static void gserial_console_init(void)
+static int gs_console_connect(struct gs_port *port)
{
- register_console(&gserial_cons);
+ struct gs_console *cons = port->console;
+ struct usb_request *req;
+ struct usb_ep *ep;
+
+ if (!cons)
+ return 0;
+
+ ep = port->port_usb->in;
+ req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
+ if (!req)
+ return -ENOMEM;
+ req->complete = gs_console_complete_out;
+ req->context = cons;
+ req->length = 0;
+
+ spin_lock(&cons->lock);
+ cons->req = req;
+ cons->console.data = ep;
+ spin_unlock(&cons->lock);
+
+ pr_debug("ttyGS%d: console connected!\n", port->port_num);
+
+ schedule_work(&cons->work);
+
+ return 0;
}
-static void gserial_console_exit(void)
+static void gs_console_disconnect(struct gs_port *port)
{
- struct gscons_info *info = &gscons_info;
+ struct gs_console *cons = port->console;
+ struct usb_request *req;
+ struct usb_ep *ep;
- unregister_console(&gserial_cons);
- if (!IS_ERR_OR_NULL(info->console_thread))
- kthread_stop(info->console_thread);
- kfifo_free(&info->con_buf);
+ if (!cons)
+ return;
+
+ spin_lock(&cons->lock);
+
+ req = cons->req;
+ ep = cons->console.data;
+ cons->req = NULL;
+
+ spin_unlock(&cons->lock);
+
+ if (!req)
+ return;
+
+ usb_ep_dequeue(ep, req);
+ gs_free_req(ep, req);
}
+
+static int gs_console_init(struct gs_port *port)
+{
+ struct gs_console *cons;
+ int err;
+
+ if (port->console)
+ return 0;
+
+ cons = kzalloc(sizeof(*port->console), GFP_KERNEL);
+ if (!cons)
+ return -ENOMEM;
+
+ strcpy(cons->console.name, "ttyGS");
+ cons->console.write = gs_console_write;
+ cons->console.device = gs_console_device;
+ cons->console.flags = CON_PRINTBUFFER;
+ cons->console.index = port->port_num;
+
+ INIT_WORK(&cons->work, gs_console_work);
+ spin_lock_init(&cons->lock);
+
+ err = kfifo_alloc(&cons->buf, GS_CONSOLE_BUF_SIZE, GFP_KERNEL);
+ if (err) {
+ pr_err("ttyGS%d: allocate console buffer failed\n", port->port_num);
+ kfree(cons);
+ return err;
+ }
+
+ port->console = cons;
+ register_console(&cons->console);
+
+ spin_lock_irq(&port->port_lock);
+ if (port->port_usb)
+ gs_console_connect(port);
+ spin_unlock_irq(&port->port_lock);
+
+ return 0;
+}
+
+static void gs_console_exit(struct gs_port *port)
+{
+ struct gs_console *cons = port->console;
+
+ if (!cons)
+ return;
+
+ unregister_console(&cons->console);
+
+ spin_lock_irq(&port->port_lock);
+ if (cons->req)
+ gs_console_disconnect(port);
+ spin_unlock_irq(&port->port_lock);
+
+ cancel_work_sync(&cons->work);
+ kfifo_free(&cons->buf);
+ kfree(cons);
+ port->console = NULL;
+}
+
+ssize_t gserial_set_console(unsigned char port_num, const char *page, size_t count)
+{
+ struct gs_port *port;
+ bool enable;
+ int ret;
+
+ ret = strtobool(page, &enable);
+ if (ret)
+ return ret;
+
+ mutex_lock(&ports[port_num].lock);
+ port = ports[port_num].port;
+
+ if (WARN_ON(port == NULL)) {
+ ret = -ENXIO;
+ goto out;
+ }
+
+ if (enable)
+ ret = gs_console_init(port);
+ else
+ gs_console_exit(port);
+out:
+ mutex_unlock(&ports[port_num].lock);
+
+ return ret < 0 ? ret : count;
+}
+EXPORT_SYMBOL_GPL(gserial_set_console);
+
+ssize_t gserial_get_console(unsigned char port_num, char *page)
+{
+ struct gs_port *port;
+ ssize_t ret;
+
+ mutex_lock(&ports[port_num].lock);
+ port = ports[port_num].port;
+
+ if (WARN_ON(port == NULL))
+ ret = -ENXIO;
+ else
+ ret = sprintf(page, "%u\n", !!port->console);
+
+ mutex_unlock(&ports[port_num].lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(gserial_get_console);
#else
-static int gs_console_connect(int port_num)
+static int gs_console_connect(struct gs_port *port)
{
return 0;
}
-static void gs_console_disconnect(struct usb_ep *ep)
+static void gs_console_disconnect(struct gs_port *port)
{
}
-static void gserial_console_init(void)
+static int gs_console_init(struct gs_port *port)
{
+ return -ENOSYS;
}
-static void gserial_console_exit(void)
+static void gs_console_exit(struct gs_port *port)
{
}
@@ -1122,7 +1157,7 @@
init_waitqueue_head(&port->drain_wait);
init_waitqueue_head(&port->close_wait);
- tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
+ INIT_DELAYED_WORK(&port->push, gs_rx_push);
INIT_LIST_HEAD(&port->read_pool);
INIT_LIST_HEAD(&port->read_queue);
@@ -1150,7 +1185,7 @@
static void gserial_free_port(struct gs_port *port)
{
- tasklet_kill(&port->push);
+ cancel_delayed_work_sync(&port->push);
/* wait for old opens to finish */
wait_event(port->close_wait, gs_closed(port));
WARN_ON(port->port_usb != NULL);
@@ -1168,18 +1203,19 @@
return;
}
port = ports[port_num].port;
+ gs_console_exit(port);
ports[port_num].port = NULL;
mutex_unlock(&ports[port_num].lock);
gserial_free_port(port);
tty_unregister_device(gs_tty_driver, port_num);
- gserial_console_exit();
}
EXPORT_SYMBOL_GPL(gserial_free_line);
-int gserial_alloc_line(unsigned char *line_num)
+int gserial_alloc_line_no_console(unsigned char *line_num)
{
struct usb_cdc_line_coding coding;
+ struct gs_port *port;
struct device *tty_dev;
int ret;
int port_num;
@@ -1202,24 +1238,33 @@
/* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */
- tty_dev = tty_port_register_device(&ports[port_num].port->port,
+ port = ports[port_num].port;
+ tty_dev = tty_port_register_device(&port->port,
gs_tty_driver, port_num, NULL);
if (IS_ERR(tty_dev)) {
- struct gs_port *port;
pr_err("%s: failed to register tty for port %d, err %ld\n",
__func__, port_num, PTR_ERR(tty_dev));
ret = PTR_ERR(tty_dev);
mutex_lock(&ports[port_num].lock);
- port = ports[port_num].port;
ports[port_num].port = NULL;
mutex_unlock(&ports[port_num].lock);
gserial_free_port(port);
goto err;
}
*line_num = port_num;
- gserial_console_init();
err:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(gserial_alloc_line_no_console);
+
+int gserial_alloc_line(unsigned char *line_num)
+{
+ int ret = gserial_alloc_line_no_console(line_num);
+
+ if (!ret && !*line_num)
+ gs_console_init(ports[*line_num].port);
+
return ret;
}
EXPORT_SYMBOL_GPL(gserial_alloc_line);
@@ -1300,7 +1345,7 @@
gser->disconnect(gser);
}
- status = gs_console_connect(port_num);
+ status = gs_console_connect(port);
spin_unlock_irqrestore(&port->port_lock, flags);
return status;
@@ -1332,6 +1377,8 @@
/* tell the TTY glue not to do I/O here any more */
spin_lock_irqsave(&port->port_lock, flags);
+ gs_console_disconnect(port);
+
/* REVISIT as above: how best to track this? */
port->port_line_coding = gser->port_line_coding;
@@ -1342,6 +1389,7 @@
if (port->port.tty)
tty_hangup(port->port.tty);
}
+ port->suspended = false;
spin_unlock_irqrestore(&port->port_lock, flags);
/* disable endpoints, aborting down any active I/O */
@@ -1359,11 +1407,42 @@
port->read_allocated = port->read_started =
port->write_allocated = port->write_started = 0;
- gs_console_disconnect(gser->in);
spin_unlock_irqrestore(&port->port_lock, flags);
}
EXPORT_SYMBOL_GPL(gserial_disconnect);
+void gserial_suspend(struct gserial *gser)
+{
+ struct gs_port *port = gser->ioport;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->port_lock, flags);
+ port->suspended = true;
+ spin_unlock_irqrestore(&port->port_lock, flags);
+}
+EXPORT_SYMBOL_GPL(gserial_suspend);
+
+void gserial_resume(struct gserial *gser)
+{
+ struct gs_port *port = gser->ioport;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->port_lock, flags);
+ port->suspended = false;
+ if (!port->start_delayed) {
+ spin_unlock_irqrestore(&port->port_lock, flags);
+ return;
+ }
+
+ pr_debug("delayed start ttyGS%d\n", port->port_num);
+ gs_start_io(port);
+ if (gser->connect)
+ gser->connect(gser);
+ port->start_delayed = false;
+ spin_unlock_irqrestore(&port->port_lock, flags);
+}
+EXPORT_SYMBOL_GPL(gserial_resume);
+
static int userial_init(void)
{
unsigned i;
--
Gitblit v1.6.2