From b22da3d8526a935aa31e086e63f60ff3246cb61c Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 07:24:11 +0000
Subject: [PATCH] add stmac read mac form eeprom
---
kernel/drivers/usb/core/config.c | 63 +++++++++++--------------------
1 files changed, 22 insertions(+), 41 deletions(-)
diff --git a/kernel/drivers/usb/core/config.c b/kernel/drivers/usb/core/config.c
index a0ab8d0..39f1eca 100644
--- a/kernel/drivers/usb/core/config.c
+++ b/kernel/drivers/usb/core/config.c
@@ -298,10 +298,10 @@
goto skip_to_next_endpoint_or_interface_descriptor;
}
- /* Ignore blacklisted endpoints */
- if (udev->quirks & USB_QUIRK_ENDPOINT_BLACKLIST) {
- if (usb_endpoint_is_blacklisted(udev, ifp, d)) {
- dev_warn(ddev, "config %d interface %d altsetting %d has a blacklisted endpoint with address 0x%X, skipping\n",
+ /* Ignore some endpoints */
+ if (udev->quirks & USB_QUIRK_ENDPOINT_IGNORE) {
+ if (usb_endpoint_is_ignored(udev, ifp, d)) {
+ dev_warn(ddev, "config %d interface %d altsetting %d has an ignored endpoint with address 0x%X, skipping\n",
cfgno, inum, asnum,
d->bEndpointAddress);
goto skip_to_next_endpoint_or_interface_descriptor;
@@ -322,7 +322,7 @@
j = 255;
if (usb_endpoint_xfer_int(d)) {
i = 1;
- switch (to_usb_device(ddev)->speed) {
+ switch (udev->speed) {
case USB_SPEED_SUPER_PLUS:
case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
@@ -343,8 +343,7 @@
/*
* This quirk fixes bIntervals reported in ms.
*/
- if (to_usb_device(ddev)->quirks &
- USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL) {
+ if (udev->quirks & USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL) {
n = clamp(fls(d->bInterval) + 3, i, j);
i = j = n;
}
@@ -352,8 +351,7 @@
* This quirk fixes bIntervals reported in
* linear microframes.
*/
- if (to_usb_device(ddev)->quirks &
- USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) {
+ if (udev->quirks & USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) {
n = clamp(fls(d->bInterval), i, j);
i = j = n;
}
@@ -370,7 +368,7 @@
} else if (usb_endpoint_xfer_isoc(d)) {
i = 1;
j = 16;
- switch (to_usb_device(ddev)->speed) {
+ switch (udev->speed) {
case USB_SPEED_HIGH:
n = 7; /* 8 ms = 2^(7-1) uframes */
break;
@@ -392,8 +390,7 @@
* explicitly forbidden by the USB spec. In an attempt to make
* them usable, we will try treating them as Interrupt endpoints.
*/
- if (to_usb_device(ddev)->speed == USB_SPEED_LOW &&
- usb_endpoint_xfer_bulk(d)) {
+ if (udev->speed == USB_SPEED_LOW && usb_endpoint_xfer_bulk(d)) {
dev_warn(ddev, "config %d interface %d altsetting %d "
"endpoint 0x%X is Bulk; changing to Interrupt\n",
cfgno, inum, asnum, d->bEndpointAddress);
@@ -417,7 +414,7 @@
/* Find the highest legal maxpacket size for this endpoint */
i = 0; /* additional transactions per microframe */
- switch (to_usb_device(ddev)->speed) {
+ switch (udev->speed) {
case USB_SPEED_LOW:
maxpacket_maxes = low_speed_maxpacket_maxes;
break;
@@ -430,7 +427,7 @@
i = maxp & USB_EP_MAXP_MULT_MASK;
maxp &= ~i;
}
- /* fallthrough */
+ fallthrough;
default:
maxpacket_maxes = high_speed_maxpacket_maxes;
break;
@@ -453,8 +450,7 @@
* maxpacket sizes other than 512. High speed HCDs may not
* be able to handle that particular bug, so let's warn...
*/
- if (to_usb_device(ddev)->speed == USB_SPEED_HIGH
- && usb_endpoint_xfer_bulk(d)) {
+ if (udev->speed == USB_SPEED_HIGH && usb_endpoint_xfer_bulk(d)) {
if (maxp != 512)
dev_warn(ddev, "config %d interface %d altsetting %d "
"bulk endpoint 0x%X has invalid maxpacket %d\n",
@@ -463,7 +459,7 @@
}
/* Parse a possible SuperSpeed endpoint companion descriptor */
- if (to_usb_device(ddev)->speed >= USB_SPEED_SUPER)
+ if (udev->speed >= USB_SPEED_SUPER)
usb_parse_ss_endpoint_companion(ddev, cfgno,
inum, asnum, endpoint, buffer, size);
@@ -618,7 +614,7 @@
unsigned char *buffer2;
int size2;
struct usb_descriptor_header *header;
- int len, retval;
+ int retval;
u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES];
unsigned iad_num = 0;
@@ -773,8 +769,8 @@
nalts[i] = j = USB_MAXALTSETTING;
}
- len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j;
- config->intf_cache[i] = intfc = kzalloc(len, GFP_KERNEL);
+ intfc = kzalloc(struct_size(intfc, altsetting, j), GFP_KERNEL);
+ config->intf_cache[i] = intfc;
if (!intfc)
return -ENOMEM;
kref_init(&intfc->ref);
@@ -866,13 +862,11 @@
{
struct device *ddev = &dev->dev;
int ncfg = dev->descriptor.bNumConfigurations;
- int result = 0;
unsigned int cfgno, length;
unsigned char *bigbuffer;
struct usb_config_descriptor *desc;
+ int result;
- cfgno = 0;
- result = -ENOMEM;
if (ncfg > USB_MAXCONFIG) {
dev_warn(ddev, "too many configurations: %d, "
"using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
@@ -887,19 +881,18 @@
length = ncfg * sizeof(struct usb_host_config);
dev->config = kzalloc(length, GFP_KERNEL);
if (!dev->config)
- goto err2;
+ return -ENOMEM;
length = ncfg * sizeof(char *);
dev->rawdescriptors = kzalloc(length, GFP_KERNEL);
if (!dev->rawdescriptors)
- goto err2;
+ return -ENOMEM;
desc = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
if (!desc)
- goto err2;
+ return -ENOMEM;
- result = 0;
- for (; cfgno < ncfg; cfgno++) {
+ for (cfgno = 0; cfgno < ncfg; cfgno++) {
/* We grab just the first descriptor so we know how long
* the whole configuration is */
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
@@ -955,14 +948,11 @@
goto err;
}
}
- result = 0;
err:
kfree(desc);
dev->descriptor.bNumConfigurations = cfgno;
-err2:
- if (result == -ENOMEM)
- dev_err(ddev, "out of memory\n");
+
return result;
}
@@ -1086,15 +1076,6 @@
case USB_PTM_CAP_TYPE:
dev->bos->ptm_cap =
(struct usb_ptm_cap_descriptor *)buffer;
- break;
- case USB_CAP_TYPE_CONFIG_SUMMARY:
- /* one such desc per function */
- if (!dev->bos->num_config_summary_desc)
- dev->bos->config_summary =
- (struct usb_config_summary_descriptor *)buffer;
-
- dev->bos->num_config_summary_desc++;
- break;
default:
break;
}
--
Gitblit v1.6.2