From b22da3d8526a935aa31e086e63f60ff3246cb61c Mon Sep 17 00:00:00 2001 From: hc <hc@nodka.com> Date: Sat, 09 Dec 2023 07:24:11 +0000 Subject: [PATCH] add stmac read mac form eeprom --- kernel/drivers/power/supply/Kconfig | 278 +++++++++++++++++++++++++++++++++++++++++++++---------- 1 files changed, 226 insertions(+), 52 deletions(-) diff --git a/kernel/drivers/power/supply/Kconfig b/kernel/drivers/power/supply/Kconfig index 80d1a2c..2d1539d 100644 --- a/kernel/drivers/power/supply/Kconfig +++ b/kernel/drivers/power/supply/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig POWER_SUPPLY bool "Power supply class support" help @@ -13,6 +14,20 @@ help Say Y here to enable debugging messages for power supply class and drivers. + +config POWER_SUPPLY_HWMON + bool + prompt "Expose power supply sensors as hwmon device" + depends on HWMON=y || HWMON=POWER_SUPPLY + default y + help + This options enables API that allows sensors found on a + power supply device (current, voltage, temperature) to be + exposed as a hwmon device. + + Say 'Y' here if you want power supplies to + have hwmon sysfs interface too. + config PDA_POWER tristate "Generic PDA/phone power driver" @@ -58,10 +73,10 @@ provided by Wolfson Microelectronics WM831x PMICs. config WM8350_POWER - tristate "WM8350 PMU support" - depends on MFD_WM8350 - help - Say Y here to enable support for the power management unit + tristate "WM8350 PMU support" + depends on MFD_WM8350 + help + Say Y here to enable support for the power management unit provided by the Wolfson Microelectronics WM8350 PMIC. config TEST_POWER @@ -101,6 +116,38 @@ Say Y here to enable support for battery on Motorola phones and tablets such as droid 4. +config BATTERY_CW2015 + tristate "CW2015 Battery driver" + depends on I2C + select REGMAP_I2C + help + Say Y here to enable support for the cellwise cw2015 + battery fuel gauge (used in the Pinebook Pro & others) + + This driver can also be built as a module. If so, the module will be + called cw2015_battery. + +config BATTERY_CW2017 + tristate "CW2017 Battery driver" + depends on I2C + select REGMAP_I2C + help + Say Y here to enable support for the cellwise cw2017 + battery fuel gauge (used in the Pinebook Pro & others) + + This driver can also be built as a module. If so, the module will be + called cw2017_battery. + +config BATTERY_CW221X + tristate "CW221x Battery driver" + depends on I2C + select REGMAP_I2C + help + Say Y hereto enable support for the cellwise cw221x + battery fuel gauge (used in the Pinebook Pro & others) + This driver can also be built as a module. If so, the module will be + called cw221x_battery. + config BATTERY_DS2760 tristate "DS2760 battery driver (HP iPAQ & others)" depends on W1 @@ -138,7 +185,7 @@ config BATTERY_LEGO_EV3 tristate "LEGO MINDSTORMS EV3 battery" - depends on OF && IIO && GPIOLIB + depends on OF && IIO && GPIOLIB && (ARCH_DAVINCI_DA850 || COMPILE_TEST) help Say Y here to enable support for the LEGO MINDSTORMS EV3 battery. @@ -151,7 +198,7 @@ config BATTERY_OLPC tristate "One Laptop Per Child battery" - depends on X86_32 && OLPC + depends on OLPC_EC help Say Y to enable support for the battery on the OLPC laptop. @@ -169,6 +216,17 @@ Say Y to enable support for the battery on the Sharp Zaurus SL-5500 (collie) models. +config BATTERY_INGENIC + tristate "Ingenic JZ47xx SoCs battery driver" + depends on MIPS || COMPILE_TEST + depends on INGENIC_ADC + help + Choose this option if you want to monitor battery status on + Ingenic JZ47xx SoC based devices. + + This driver can also be built as a module. If so, the module will be + called ingenic-battery. + config BATTERY_IPAQ_MICRO tristate "iPAQ Atmel Micro ASIC battery driver" depends on MFD_IPAQ_MICRO @@ -183,16 +241,17 @@ Say Y to enable support for battery measured by WM97xx aux port. config BATTERY_SBS - tristate "SBS Compliant gas gauge" - depends on I2C - help + tristate "SBS Compliant gas gauge" + depends on I2C + help Say Y to include support for SBS battery driver for SBS-compliant gas gauges. config CHARGER_SBS - tristate "SBS Compliant charger" - depends on I2C - help + tristate "SBS Compliant charger" + depends on I2C + select REGMAP_I2C + help Say Y to include support for SBS compliant battery chargers. config MANAGER_SBS @@ -330,10 +389,15 @@ config BATTERY_MAX17040 tristate "Maxim MAX17040 Fuel Gauge" depends on I2C + select REGMAP_I2C help - MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries - in handheld and portable equipment. The MAX17040 is configured - to operate with a single lithium cell + Maxim models with ModelGauge are fuel-gauge systems for lithium-ion + (Li+) batteries in handheld and portable equipment, including + max17040, max17041, max17043, max17044, max17048, max17049, max17058, + max17059. It is also included in some batteries like max77836. + + Driver supports reporting SOC (State of Charge, i.e capacity), + voltage and configurable low-SOC wakeup interrupt. config BATTERY_MAX17042 tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge" @@ -389,18 +453,7 @@ tristate "NXP PCF50633 MBC" depends on MFD_PCF50633 help - Say Y to include support for NXP PCF50633 Main Battery Charger. - -config BATTERY_JZ4740 - tristate "Ingenic JZ4740 battery" - depends on MACH_JZ4740 - depends on MFD_JZ4740_ADC - help - Say Y to enable support for the battery on Ingenic JZ4740 based - boards. - - This driver can be build as a module. If so, the module will be - called jz4740-battery. + Say Y to include support for NXP PCF50633 Main Battery Charger. config BATTERY_RX51 tristate "Nokia RX-51 (N900) battery driver" @@ -465,22 +518,44 @@ called gpio-charger. config CHARGER_MANAGER - bool "Battery charger manager for multiple chargers" + tristate "Battery charger manager for multiple chargers" depends on REGULATOR select EXTCON help - Say Y to enable charger-manager support, which allows multiple - chargers attached to a battery and multiple batteries attached to a - system. The charger-manager also can monitor charging status in - runtime and in suspend-to-RAM by waking up the system periodically - with help of suspend_again support. + Say Y to enable charger-manager support, which allows multiple + chargers attached to a battery and multiple batteries attached to a + system. The charger-manager also can monitor charging status in + runtime and in suspend-to-RAM by waking up the system periodically + with help of suspend_again support. -config CHARGER_LTC3651 - tristate "LTC3651 charger" +config ROCKCHIP_CHARGER_MANAGER + tristate "rockchip battery charger manager" + select EXTCON + help + Say Y to enable charger manager support, which allows multiple + chargers attached to a battery. + +config CHARGER_LT3651 + tristate "Analog Devices LT3651 charger" depends on GPIOLIB help - Say Y to include support for the LTC3651 battery charger which reports - its status via GPIO lines. + Say Y to include support for the Analog Devices (Linear Technology) + LT3651 battery charger which reports its status via GPIO lines. + +config CHARGER_SC8551 + tristate "SC8551 battery charger pump driver" + depends on I2C + select REGMAP_I2C + help + Say Y to enable support for the SC8551 battery pump charger. + +config CHARGER_SC89890 + tristate "SC89890 battery charger driver" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + select REGMAP_I2C + help + Say Y to enable support for the SC89890 battery charger. config CHARGER_MAX14577 tristate "Maxim MAX14577/77836 battery charger driver" @@ -498,6 +573,13 @@ The device is compliant with the USB Battery Charging Specification Revision 1.2 and can be found e.g. in Kindle 4/5th generation readers and certain LG devices. + +config CHARGER_MAX77650 + tristate "Maxim MAX77650 battery charger driver" + depends on MFD_MAX77650 + help + Say Y to enable support for the battery charger control of MAX77650 + PMICs. config CHARGER_MAX77693 tristate "Maxim MAX77693 battery charger driver" @@ -518,6 +600,16 @@ help Say Y to enable support for the battery charger control sysfs and platform data of MAX8998/LP3974 PMICs. + +config CHARGER_MP2629 + tristate "Monolithic power system MP2629 Battery charger" + depends on MFD_MP2629 + depends on MP2629_ADC + depends on IIO + help + Select this option to enable support for Monolithic power system + Battery charger. This driver provides Battery charger power management + functions on the systems. config CHARGER_QCOM_SMBB tristate "Qualcomm Switch-Mode Battery Charger and Boost" @@ -567,6 +659,19 @@ help Say Y to enable support for the TI BQ24735 battery charger. +config CHARGER_BQ2515X + tristate "TI BQ2515X battery charger family" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + select REGMAP_I2C + help + Say Y to enable support for the TI BQ2515X family of battery + charging integrated circuits. The BQ2515X are highly integrated + battery charge management ICs that integrate the most common + functions for wearable devices, namely a charger, an output voltage + rail, ADC for battery and system monitoring, and push-button + controller. + config CHARGER_BQ25700 tristate "TI BQ25700 battery charger driver" depends on REGMAP_I2C @@ -581,27 +686,36 @@ help Say Y to enable support for the TI BQ25890 battery charger. +config CHARGER_BQ25980 + tristate "TI BQ25980 battery charger driver" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + select REGMAP_I2C + help + Say Y to enable support for the TI BQ25980, BQ25975 and BQ25960 + series of fast battery chargers. + config CHARGER_SMB347 - tristate "Summit Microelectronics SMB347 Battery Charger" + tristate "Summit Microelectronics SMB3XX Battery Charger" depends on I2C select REGMAP_I2C help - Say Y to include support for Summit Microelectronics SMB347 - Battery Charger. + Say Y to include support for Summit Microelectronics SMB345, + SMB347 or SMB358 Battery Charger. config CHARGER_TPS65090 tristate "TPS65090 battery charger driver" depends on MFD_TPS65090 help - Say Y here to enable support for battery charging with TPS65090 - PMIC chips. + Say Y here to enable support for battery charging with TPS65090 + PMIC chips. config CHARGER_TPS65217 tristate "TPS65217 battery charger driver" depends on MFD_TPS65217 help - Say Y here to enable support for battery charging with TPS65217 - PMIC chips. + Say Y here to enable support for battery charging with TPS65217 + PMIC chips. config BATTERY_GAUGE_LTC2941 tristate "LTC2941/LTC2943 Battery Gauge Driver" @@ -613,7 +727,7 @@ config AB8500_BM bool "AB8500 Battery Management Driver" - depends on AB8500_CORE && AB8500_GPADC + depends on AB8500_CORE && AB8500_GPADC && (IIO = y) help Say Y to include support for AB8500 battery management. @@ -644,20 +758,72 @@ config CHARGER_CROS_USBPD tristate "ChromeOS EC based USBPD charger" - depends on MFD_CROS_EC - default n + depends on CROS_USBPD_NOTIFY help Say Y here to enable ChromeOS EC based USBPD charger driver. This driver gets various bits of information about what is connected to USB PD ports from the EC and converts that into power_supply properties. -config BATTERY_CW2015 - bool "CW2015 Battery driver" - default n +config CHARGER_SC2731 + tristate "Spreadtrum SC2731 charger driver" + depends on MFD_SC27XX_PMIC || COMPILE_TEST help - If you say yes here you will get support for the battery of CW2015. - This driver can give support for CW2015 Battery Interface. + Say Y here to enable support for battery charging with SC2731 + PMIC chips. + +config FUEL_GAUGE_SC27XX + tristate "Spreadtrum SC27XX fuel gauge driver" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + depends on IIO + help + Say Y here to enable support for fuel gauge with SC27XX + PMIC chips. + +config CHARGER_UCS1002 + tristate "Microchip UCS1002 USB Port Power Controller" + depends on I2C + depends on OF + depends on REGULATOR + select REGMAP_I2C + help + Say Y to enable support for Microchip UCS1002 Programmable + USB Port Power Controller with Charger Emulation. + +config CHARGER_BD70528 + tristate "ROHM bd70528 charger driver" + depends on MFD_ROHM_BD70528 + select LINEAR_RANGES + help + Say Y here to enable support for getting battery status + information and altering charger configurations from charger + block of the ROHM BD70528 Power Management IC. + +config CHARGER_BD99954 + tristate "ROHM bd99954 charger driver" + depends on I2C + select LINEAR_RANGES + help + Say Y here to enable support for getting battery and charger + information and altering charger configurations from the ROHM + BD99954 charger IC. + +config CHARGER_WILCO + tristate "Wilco EC based charger for ChromeOS" + depends on WILCO_EC + help + Say Y here to enable control of the charging routines performed + by the Embedded Controller on the Chromebook named Wilco. Further + information can be found in + Documentation/ABI/testing/sysfs-class-power-wilco + +config RN5T618_POWER + tristate "RN5T618 charger/fuel gauge support" + depends on MFD_RN5T618 + help + Say Y here to have support for RN5T618 PMIC family fuel gauge and charger. + This driver can also be built as a module. If so, the module will be + called rn5t618_power. config BATTERY_RK816 tristate "RK816 Battery driver" @@ -696,4 +862,12 @@ If you say yes here you will get support for the charger of RK818 PMIC. This driver can give support for Rk818 Charger Interface. +config CHARGER_SGM41542 + tristate "SGM41542 charger driver" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + select REGMAP_I2C + help + Say Y to enable support for the SGM41542 battery charger. + endif # POWER_SUPPLY -- Gitblit v1.6.2