From b22da3d8526a935aa31e086e63f60ff3246cb61c Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 07:24:11 +0000
Subject: [PATCH] add stmac read mac form eeprom
---
kernel/arch/x86/kernel/cpu/microcode/core.c | 80 ++++++++++++++++++++-------------------
1 files changed, 41 insertions(+), 39 deletions(-)
diff --git a/kernel/arch/x86/kernel/cpu/microcode/core.c b/kernel/arch/x86/kernel/cpu/microcode/core.c
index eab4de3..0b1732b 100644
--- a/kernel/arch/x86/kernel/cpu/microcode/core.c
+++ b/kernel/arch/x86/kernel/cpu/microcode/core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* CPU Microcode Update Driver for Linux
*
@@ -12,11 +13,6 @@
* (C) 2015 Borislav Petkov <bp@alien8.de>
*
* This driver allows to upgrade microcode on x86 processors.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
*/
#define pr_fmt(fmt) "microcode: " fmt
@@ -66,11 +62,6 @@
* updated at any particular moment of time.
*/
static DEFINE_MUTEX(microcode_mutex);
-
-/*
- * Serialize late loading so that CPUs get updated one-by-one.
- */
-static DEFINE_RAW_SPINLOCK(update_lock);
struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
@@ -154,7 +145,6 @@
bool get_builtin_firmware(struct cpio_data *cd, const char *name)
{
-#ifdef CONFIG_FW_LOADER
struct builtin_fw *b_fw;
for (b_fw = __start_builtin_fw; b_fw != __end_builtin_fw; b_fw++) {
@@ -164,7 +154,6 @@
return true;
}
}
-#endif
return false;
}
@@ -428,16 +417,17 @@
static int microcode_open(struct inode *inode, struct file *file)
{
- return capable(CAP_SYS_RAWIO) ? nonseekable_open(inode, file) : -EPERM;
+ return capable(CAP_SYS_RAWIO) ? stream_open(inode, file) : -EPERM;
}
static ssize_t microcode_write(struct file *file, const char __user *buf,
size_t len, loff_t *ppos)
{
ssize_t ret = -EINVAL;
+ unsigned long nr_pages = totalram_pages();
- if ((len >> PAGE_SHIFT) > totalram_pages) {
- pr_err("too much data (max %ld pages)\n", totalram_pages);
+ if ((len >> PAGE_SHIFT) > nr_pages) {
+ pr_err("too much data (max %ld pages)\n", nr_pages);
return ret;
}
@@ -553,8 +543,7 @@
/*
* Returns:
* < 0 - on error
- * 0 - no update done
- * 1 - microcode was updated
+ * 0 - success (no update done or microcode was updated)
*/
static int __reload_late(void *info)
{
@@ -569,26 +558,37 @@
if (__wait_for_cpus(&late_cpus_in, NSEC_PER_SEC))
return -1;
- raw_spin_lock(&update_lock);
- apply_microcode_local(&err);
- raw_spin_unlock(&update_lock);
+ /*
+ * On an SMT system, it suffices to load the microcode on one sibling of
+ * the core because the microcode engine is shared between the threads.
+ * Synchronization still needs to take place so that no concurrent
+ * loading attempts happen on multiple threads of an SMT core. See
+ * below.
+ */
+ if (cpumask_first(topology_sibling_cpumask(cpu)) == cpu)
+ apply_microcode_local(&err);
+ else
+ goto wait_for_siblings;
- /* siblings return UCODE_OK because their engine got updated already */
- if (err > UCODE_NFOUND) {
- pr_warn("Error reloading microcode on CPU %d\n", cpu);
+ if (err >= UCODE_NFOUND) {
+ if (err == UCODE_ERROR)
+ pr_warn("Error reloading microcode on CPU %d\n", cpu);
+
ret = -1;
- } else if (err == UCODE_UPDATED || err == UCODE_OK) {
- ret = 1;
}
- /*
- * Increase the wait timeout to a safe value here since we're
- * serializing the microcode update and that could take a while on a
- * large number of CPUs. And that is fine as the *actual* timeout will
- * be determined by the last CPU finished updating and thus cut short.
- */
- if (__wait_for_cpus(&late_cpus_out, NSEC_PER_SEC * num_online_cpus()))
+wait_for_siblings:
+ if (__wait_for_cpus(&late_cpus_out, NSEC_PER_SEC))
panic("Timeout during microcode update!\n");
+
+ /*
+ * At least one thread has completed update on each core.
+ * For others, simply call the update to make sure the
+ * per-cpu cpuinfo can be updated with right microcode
+ * revision.
+ */
+ if (cpumask_first(topology_sibling_cpumask(cpu)) != cpu)
+ apply_microcode_local(&err);
return ret;
}
@@ -605,8 +605,10 @@
atomic_set(&late_cpus_out, 0);
ret = stop_machine_cpuslocked(__reload_late, NULL, cpu_online_mask);
- if (ret > 0)
+ if (ret == 0)
microcode_check();
+
+ pr_info("Reload completed, microcode revision: 0x%x\n", boot_cpu_data.microcode);
return ret;
}
@@ -644,7 +646,7 @@
put:
put_online_cpus();
- if (ret >= 0)
+ if (ret == 0)
ret = size;
return ret;
@@ -667,8 +669,8 @@
}
static DEVICE_ATTR_WO(reload);
-static DEVICE_ATTR(version, 0400, version_show, NULL);
-static DEVICE_ATTR(processor_flags, 0400, pf_show, NULL);
+static DEVICE_ATTR(version, 0444, version_show, NULL);
+static DEVICE_ATTR(processor_flags, 0444, pf_show, NULL);
static struct attribute *mc_default_attrs[] = {
&dev_attr_version.attr,
@@ -773,9 +775,9 @@
};
/**
- * mc_bp_resume - Update boot CPU microcode during resume.
+ * microcode_bsp_resume - Update boot CPU microcode during resume.
*/
-static void mc_bp_resume(void)
+void microcode_bsp_resume(void)
{
int cpu = smp_processor_id();
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
@@ -787,7 +789,7 @@
}
static struct syscore_ops mc_syscore_ops = {
- .resume = mc_bp_resume,
+ .resume = microcode_bsp_resume,
};
static int mc_cpu_starting(unsigned int cpu)
--
Gitblit v1.6.2