From b22da3d8526a935aa31e086e63f60ff3246cb61c Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 07:24:11 +0000
Subject: [PATCH] add stmac read mac form eeprom

---
 kernel/arch/arm/boot/dts/sun6i-a31-m9.dts |   44 +++++++++++---------------------------------
 1 files changed, 11 insertions(+), 33 deletions(-)

diff --git a/kernel/arch/arm/boot/dts/sun6i-a31-m9.dts b/kernel/arch/arm/boot/dts/sun6i-a31-m9.dts
index 9698f6d..a645c8f 100644
--- a/kernel/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/kernel/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -60,8 +60,6 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_m9>;
 
 		blue {
 			label = "m9:blue:pwr";
@@ -85,26 +83,26 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
+};
 
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
 
-&ir {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
-	status = "okay";
-};
-
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
@@ -123,24 +121,6 @@
 };
 
 #include "axp22x.dtsi"
-
-&pio {
-	led_pins_m9: led_pins@0 {
-		pins = "PH13";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
-		pins = "PH22";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
-		pins = "PC27";
-		function = "gpio_out";
-	};
-};
 
 &reg_aldo1 {
 	regulator-min-microvolt = <3300000>;
@@ -215,15 +195,13 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_vbus_pin_m9>;
 	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 

--
Gitblit v1.6.2