From b22da3d8526a935aa31e086e63f60ff3246cb61c Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 09 Dec 2023 07:24:11 +0000
Subject: [PATCH] add stmac read mac form eeprom
---
kernel/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt b/kernel/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
index d1e60d2..d19885b 100644
--- a/kernel/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
+++ b/kernel/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
@@ -2,24 +2,26 @@
The Actions Semi Owl Clock Management Unit generates and supplies clock
to various controllers within the SoC. The clock binding described here is
-applicable to S900 and S700 SoC's.
+applicable to S900, S700 and S500 SoC's.
Required Properties:
- compatible: should be one of the following,
"actions,s900-cmu"
"actions,s700-cmu"
+ "actions,s500-cmu"
- reg: physical base address of the controller and length of memory mapped
region.
- clocks: Reference to the parent clocks ("hosc", "losc")
- #clock-cells: should be 1.
+- #reset-cells: should be 1.
Each clock is assigned an identifier, and client nodes can use this identifier
to specify the clock which they consume.
All available clocks are defined as preprocessor macros in corresponding
-dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h header and can be
-used in device tree sources.
+dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h or
+actions,s500-cmu.h header and can be used in device tree sources.
External clocks:
@@ -36,6 +38,7 @@
reg = <0x0 0xe0160000 0x0 0x1000>;
clocks = <&hosc>, <&losc>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
Example: UART controller node that consumes clock generated by the clock
--
Gitblit v1.6.2