From a5969cabbb4660eab42b6ef0412cbbd1200cf14d Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 12 Oct 2024 07:10:09 +0000
Subject: [PATCH] 修改led为gpio
---
kernel/drivers/net/wireless/ath/wcn36xx/hal.h | 228 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 222 insertions(+), 6 deletions(-)
diff --git a/kernel/drivers/net/wireless/ath/wcn36xx/hal.h b/kernel/drivers/net/wireless/ath/wcn36xx/hal.h
index 8abda27..65ef893 100644
--- a/kernel/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/kernel/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -726,7 +726,137 @@
#define WCN36XX_HAL_CFG_AP_LINK_MONITOR_TIMEOUT 102
#define WCN36XX_HAL_CFG_BTC_DWELL_TIME_MULTIPLIER 103
#define WCN36XX_HAL_CFG_ENABLE_TDLS_OXYGEN_MODE 104
-#define WCN36XX_HAL_CFG_MAX_PARAMS 105
+#define WCN36XX_HAL_CFG_ENABLE_NAT_KEEP_ALIVE_FILTER 105
+#define WCN36XX_HAL_CFG_ENABLE_SAP_OBSS_PROT 106
+#define WCN36XX_HAL_CFG_PSPOLL_DATA_RECEP_TIMEOUT 107
+#define WCN36XX_HAL_CFG_TDLS_PUAPSD_BUFFER_STA_CAPABLE 108
+#define WCN36XX_HAL_CFG_TDLS_PUAPSD_MASK 109
+#define WCN36XX_HAL_CFG_TDLS_PUAPSD_INACTIVITY_TIME 110
+#define WCN36XX_HAL_CFG_TDLS_PUAPSD_RX_FRAME_THRESHOLD 111
+#define WCN36XX_HAL_CFG_ANTENNA_DIVERSITY 112
+#define WCN36XX_HAL_CFG_ATH_DISABLE 113
+#define WCN36XX_HAL_CFG_FLEXCONNECT_POWER_FACTOR 114
+#define WCN36XX_HAL_CFG_ENABLE_ADAPTIVE_RX_DRAIN 115
+#define WCN36XX_HAL_CFG_TDLS_OFF_CHANNEL_CAPABLE 116
+#define WCN36XX_HAL_CFG_MWS_COEX_V1_WAN_FREQ 117
+#define WCN36XX_HAL_CFG_MWS_COEX_V1_WLAN_FREQ 118
+#define WCN36XX_HAL_CFG_MWS_COEX_V1_CONFIG 119
+#define WCN36XX_HAL_CFG_MWS_COEX_V1_CONFIG2 120
+#define WCN36XX_HAL_CFG_MWS_COEX_V2_WAN_FREQ 121
+#define WCN36XX_HAL_CFG_MWS_COEX_V2_WLAN_FREQ 122
+#define WCN36XX_HAL_CFG_MWS_COEX_V2_CONFIG 123
+#define WCN36XX_HAL_CFG_MWS_COEX_V2_CONFIG2 124
+#define WCN36XX_HAL_CFG_MWS_COEX_V3_WAN_FREQ 125
+#define WCN36XX_HAL_CFG_MWS_COEX_V3_WLAN_FREQ 126
+#define WCN36XX_HAL_CFG_MWS_COEX_V3_CONFIG 127
+#define WCN36XX_HAL_CFG_MWS_COEX_V3_CONFIG2 128
+#define WCN36XX_HAL_CFG_MWS_COEX_V4_WAN_FREQ 129
+#define WCN36XX_HAL_CFG_MWS_COEX_V4_WLAN_FREQ 130
+#define WCN36XX_HAL_CFG_MWS_COEX_V4_CONFIG 131
+#define WCN36XX_HAL_CFG_MWS_COEX_V4_CONFIG2 132
+#define WCN36XX_HAL_CFG_MWS_COEX_V5_WAN_FREQ 133
+#define WCN36XX_HAL_CFG_MWS_COEX_V5_WLAN_FREQ 134
+#define WCN36XX_HAL_CFG_MWS_COEX_V5_CONFIG 135
+#define WCN36XX_HAL_CFG_MWS_COEX_V5_CONFIG2 136
+#define WCN36XX_HAL_CFG_MWS_COEX_V6_WAN_FREQ 137
+#define WCN36XX_HAL_CFG_MWS_COEX_V6_WLAN_FREQ 138
+#define WCN36XX_HAL_CFG_MWS_COEX_V6_CONFIG 139
+#define WCN36XX_HAL_CFG_MWS_COEX_V6_CONFIG2 140
+#define WCN36XX_HAL_CFG_MWS_COEX_V7_WAN_FREQ 141
+#define WCN36XX_HAL_CFG_MWS_COEX_V7_WLAN_FREQ 142
+#define WCN36XX_HAL_CFG_MWS_COEX_V7_CONFIG 143
+#define WCN36XX_HAL_CFG_MWS_COEX_V7_CONFIG2 144
+#define WCN36XX_HAL_CFG_MWS_COEX_V8_WAN_FREQ 145
+#define WCN36XX_HAL_CFG_MWS_COEX_V8_WLAN_FREQ 146
+#define WCN36XX_HAL_CFG_MWS_COEX_V8_CONFIG 147
+#define WCN36XX_HAL_CFG_MWS_COEX_V8_CONFIG2 148
+#define WCN36XX_HAL_CFG_MWS_COEX_V9_WAN_FREQ 149
+#define WCN36XX_HAL_CFG_MWS_COEX_V9_WLAN_FREQ 150
+#define WCN36XX_HAL_CFG_MWS_COEX_V9_CONFIG 151
+#define WCN36XX_HAL_CFG_MWS_COEX_V9_CONFIG2 152
+#define WCN36XX_HAL_CFG_MWS_COEX_V10_WAN_FREQ 153
+#define WCN36XX_HAL_CFG_MWS_COEX_V10_WLAN_FREQ 154
+#define WCN36XX_HAL_CFG_MWS_COEX_V10_CONFIG 155
+#define WCN36XX_HAL_CFG_MWS_COEX_V10_CONFIG2 156
+#define WCN36XX_HAL_CFG_MWS_COEX_MODEM_BACKOFF 157
+#define WCN36XX_HAL_CFG_MWS_COEX_CONFIG1 158
+#define WCN36XX_HAL_CFG_MWS_COEX_CONFIG2 159
+#define WCN36XX_HAL_CFG_MWS_COEX_CONFIG3 160
+#define WCN36XX_HAL_CFG_MWS_COEX_CONFIG4 161
+#define WCN36XX_HAL_CFG_MWS_COEX_CONFIG5 162
+#define WCN36XX_HAL_CFG_MWS_COEX_CONFIG6 163
+#define WCN36XX_HAL_CFG_SAR_POWER_BACKOFF 164
+#define WCN36XX_HAL_CFG_GO_LINK_MONITOR_TIMEOUT 165
+#define WCN36XX_HAL_CFG_BTC_STATIC_OPP_WLAN_ACTIVE_WLAN_LEN 166
+#define WCN36XX_HAL_CFG_BTC_STATIC_OPP_WLAN_ACTIVE_BT_LEN 167
+#define WCN36XX_HAL_CFG_BTC_SAP_STATIC_OPP_ACTIVE_WLAN_LEN 168
+#define WCN36XX_HAL_CFG_BTC_SAP_STATIC_OPP_ACTIVE_BT_LEN 169
+#define WCN36XX_HAL_CFG_RMC_FIXED_RATE 170
+#define WCN36XX_HAL_CFG_ASD_PROBE_INTERVAL 171
+#define WCN36XX_HAL_CFG_ASD_TRIGGER_THRESHOLD 172
+#define WCN36XX_HAL_CFG_ASD_RTT_RSSI_HYST_THRESHOLD 173
+#define WCN36XX_HAL_CFG_BTC_CTS2S_ON_STA_DURING_SCO 174
+#define WCN36XX_HAL_CFG_SHORT_PREAMBLE 175
+#define WCN36XX_HAL_CFG_SHORT_SLOT_TIME 176
+#define WCN36XX_HAL_CFG_DELAYED_BA 177
+#define WCN36XX_HAL_CFG_IMMEDIATE_BA 178
+#define WCN36XX_HAL_CFG_DOT11_MODE 179
+#define WCN36XX_HAL_CFG_HT_CAPS 180
+#define WCN36XX_HAL_CFG_AMPDU_PARAMS 181
+#define WCN36XX_HAL_CFG_TX_BF_INFO 182
+#define WCN36XX_HAL_CFG_ASC_CAP_INFO 183
+#define WCN36XX_HAL_CFG_EXT_HT_CAPS 184
+#define WCN36XX_HAL_CFG_QOS_ENABLED 185
+#define WCN36XX_HAL_CFG_WME_ENABLED 186
+#define WCN36XX_HAL_CFG_WSM_ENABLED 187
+#define WCN36XX_HAL_CFG_WMM_ENABLED 188
+#define WCN36XX_HAL_CFG_UAPSD_PER_AC_BITMASK 189
+#define WCN36XX_HAL_CFG_MCS_RATES 190
+#define WCN36XX_HAL_CFG_VHT_CAPS 191
+#define WCN36XX_HAL_CFG_VHT_RX_SUPP_MCS 192
+#define WCN36XX_HAL_CFG_VHT_TX_SUPP_MCS 193
+#define WCN36XX_HAL_CFG_RA_FILTER_ENABLE 194
+#define WCN36XX_HAL_CFG_RA_RATE_LIMIT_INTERVAL 195
+#define WCN36XX_HAL_CFG_BTC_FATAL_HID_NSNIFF_BLK 196
+#define WCN36XX_HAL_CFG_BTC_CRITICAL_HID_NSNIFF_BLK 197
+#define WCN36XX_HAL_CFG_BTC_DYN_A2DP_TX_QUEUE_THOLD 198
+#define WCN36XX_HAL_CFG_BTC_DYN_OPP_TX_QUEUE_THOLD 199
+#define WCN36XX_HAL_CFG_LINK_FAIL_TIMEOUT 200
+#define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_SP 201
+#define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_RX_CNT 202
+#define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_TX_CNT 203
+#define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_RX_CNT_MEAS_WINDOW 204
+#define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_TX_CNT_MEAS_WINDOW 205
+#define WCN36XX_HAL_CFG_MAX_PSPOLL_IN_WMM_UAPSD_PS_MODE 206
+#define WCN36XX_HAL_CFG_MAX_UAPSD_INACTIVITY_INTERVALS 207
+#define WCN36XX_HAL_CFG_ENABLE_DYNAMIC_WMMPS 208
+#define WCN36XX_HAL_CFG_BURST_MODE_BE_TXOP_VALUE 209
+#define WCN36XX_HAL_CFG_ENABLE_DYNAMIC_RA_START_RATE 210
+#define WCN36XX_HAL_CFG_BTC_FAST_WLAN_CONN_PREF 211
+#define WCN36XX_HAL_CFG_ENABLE_RTSCTS_HTVHT 212
+#define WCN36XX_HAL_CFG_BTC_STATIC_OPP_WLAN_IDLE_WLAN_LEN 213
+#define WCN36XX_HAL_CFG_BTC_STATIC_OPP_WLAN_IDLE_BT_LEN 214
+#define WCN36XX_HAL_CFG_LINK_FAIL_TX_CNT 215
+#define WCN36XX_HAL_CFG_TOGGLE_ARP_BDRATES 216
+#define WCN36XX_HAL_CFG_OPTIMIZE_CA_EVENT 217
+#define WCN36XX_HAL_CFG_EXT_SCAN_CONC_MODE 218
+#define WCN36XX_HAL_CFG_BAR_WAKEUP_HOST_DISABLE 219
+#define WCN36XX_HAL_CFG_SAR_BOFFSET_CORRECTION_ENABLE 220
+#define WCN36XX_HAL_CFG_UNITS_OF_BCN_WAIT_TIME 221
+#define WCN36XX_HAL_CFG_CONS_BCNMISS_COUNT 222
+#define WCN36XX_HAL_CFG_BTC_DISABLE_WLAN_LINK_CRITICAL 223
+#define WCN36XX_HAL_CFG_DISABLE_SCAN_DURING_SCO 224
+#define WCN36XX_HAL_CFG_TRIGGER_NULLFRAME_BEFORE_HB 225
+#define WCN36XX_HAL_CFG_ENABLE_POWERSAVE_OFFLOAD 226
+#define WCN36XX_HAL_CFG_MAX_PARAMS 227
+
+/* Specify the starting bitrate, 11B and 11A/G rates can be specified in
+ * multiples of 0.5 So for 5.5 mbps => 11. for MCS 0 - 7 rates, Bit 7 should
+ * set to 1 and Bit 0-6 represent the MCS index. so for MCS2 => 130.
+ * Any invalid non-zero value or unsupported rate will set the start rate
+ * to 6 mbps.
+ */
+#define WCN36XX_HAL_CFG_ENABLE_DYNAMIC_RA_START_RATE 210
/* Message definitons - All the messages below need to be packed */
@@ -1405,6 +1535,76 @@
struct wcn36xx_hal_config_sta_params sta_params;
} __packed;
+struct wcn36xx_hal_supported_rates_v1 {
+ /* For Self STA Entry: this represents Self Mode.
+ * For Peer Stations, this represents the mode of the peer.
+ * On Station:
+ *
+ * --this mode is updated when PE adds the Self Entry.
+ *
+ * -- OR when PE sends 'ADD_BSS' message and station context in BSS
+ * is used to indicate the mode of the AP.
+ *
+ * ON AP:
+ *
+ * -- this mode is updated when PE sends 'ADD_BSS' and Sta entry
+ * for that BSS is used to indicate the self mode of the AP.
+ *
+ * -- OR when a station is associated, PE sends 'ADD_STA' message
+ * with this mode updated.
+ */
+
+ enum sta_rate_mode op_rate_mode;
+
+ /* 11b, 11a and aniLegacyRates are IE rates which gives rate in
+ * unit of 500Kbps
+ */
+ u16 dsss_rates[WCN36XX_HAL_NUM_DSSS_RATES];
+ u16 ofdm_rates[WCN36XX_HAL_NUM_OFDM_RATES];
+ u16 legacy_rates[WCN36XX_HAL_NUM_POLARIS_RATES];
+ u16 reserved;
+
+ /* Taurus only supports 26 Titan Rates(no ESF/concat Rates will be
+ * supported) First 26 bits are reserved for those Titan rates and
+ * the last 4 bits(bit28-31) for Taurus, 2(bit26-27) bits are
+ * reserved
+ * Titan and Taurus Rates
+ */
+ u32 enhanced_rate_bitmap;
+
+ /* 0-76 bits used, remaining reserved
+ * bits 0-15 and 32 should be set.
+ */
+ u8 supported_mcs_set[WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET];
+
+ /* RX Highest Supported Data Rate defines the highest data
+ * rate that the STA is able to receive, in unites of 1Mbps.
+ * This value is derived from "Supported MCS Set field" inside
+ * the HT capability element.
+ */
+ u16 rx_highest_data_rate;
+
+ /* Indicates the Maximum MCS that can be received for each spatial
+ * stream.
+ */
+ u16 vht_rx_mcs_map;
+
+ /* Indicates the highest VHT data rate that the STA is able to
+ * receive.
+ */
+ u16 vht_rx_highest_data_rate;
+
+ /* Indicates the Maximum MCS that can be transmitted for each spatial
+ * stream.
+ */
+ u16 vht_tx_mcs_map;
+
+ /* Indicates the highest VHT data rate that the STA is able to
+ * transmit.
+ */
+ u16 vht_tx_highest_data_rate;
+} __packed;
+
struct wcn36xx_hal_config_sta_params_v1 {
/* BSSID of STA */
u8 bssid[ETH_ALEN];
@@ -1507,11 +1707,21 @@
u8 p2p;
/* Reserved to align next field on a dword boundary */
- u8 reserved;
+ u8 ht_ldpc_enabled:1;
+ u8 vht_ldpc_enabled:1;
+ u8 vht_tx_bf_enabled:1;
+ u8 vht_tx_mu_beamformee_capable:1;
+ u8 reserved:4;
/* These rates are the intersection of peer and self capabilities. */
- struct wcn36xx_hal_supported_rates supported_rates;
+ struct wcn36xx_hal_supported_rates_v1 supported_rates;
+
+ u8 vht_capable;
+ u8 vht_tx_channel_width_set;
+
} __packed;
+
+#define WCN36XX_DIFF_STA_PARAMS_V1_NOVHT 10
struct wcn36xx_hal_config_sta_req_msg_v1 {
struct wcn36xx_hal_msg_header header;
@@ -1933,7 +2143,13 @@
* "STA context"
*/
struct wcn36xx_hal_config_sta_params_v1 sta;
+
+ u8 vht_capable;
+ u8 vht_tx_channel_width_set;
+
} __packed;
+
+#define WCN36XX_DIFF_BSS_PARAMS_V1_NOVHT (WCN36XX_DIFF_STA_PARAMS_V1_NOVHT + 2)
struct wcn36xx_hal_config_bss_req_msg_v1 {
struct wcn36xx_hal_msg_header header;
@@ -2091,7 +2307,7 @@
/*
* This is used configure the key information on a given station.
* When the sec_type is WEP40 or WEP104, the def_wep_idx is used to locate
- * a preconfigured key from a BSS the station assoicated with; otherwise
+ * a preconfigured key from a BSS the station associated with; otherwise
* a new key descriptor is created based on the key field.
*/
struct wcn36xx_hal_set_sta_key_req_msg {
@@ -2240,7 +2456,7 @@
struct wcn36xx_hal_msg_header header;
/* Actual FTM Command body */
- u8 ptt_msg[0];
+ u8 ptt_msg[];
} __packed;
struct wcn36xx_hal_process_ptt_msg_rsp_msg {
@@ -2249,7 +2465,7 @@
/* FTM Command response status */
u32 ptt_msg_resp_status;
/* Actual FTM Command body */
- u8 ptt_msg[0];
+ u8 ptt_msg[];
} __packed;
struct update_edca_params_req_msg {
--
Gitblit v1.6.2