From a5969cabbb4660eab42b6ef0412cbbd1200cf14d Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 12 Oct 2024 07:10:09 +0000
Subject: [PATCH] 修改led为gpio
---
kernel/drivers/i2c/busses/i2c-designware-core.h | 92 ++++++++++++++++++++++++++++++++++-----------
1 files changed, 69 insertions(+), 23 deletions(-)
diff --git a/kernel/drivers/i2c/busses/i2c-designware-core.h b/kernel/drivers/i2c/busses/i2c-designware-core.h
index e367b1a..eb5ef4d 100644
--- a/kernel/drivers/i2c/busses/i2c-designware-core.h
+++ b/kernel/drivers/i2c/busses/i2c-designware-core.h
@@ -9,8 +9,14 @@
* Copyright (C) 2009 Provigent Ltd.
*/
+#include <linux/bits.h>
+#include <linux/compiler_types.h>
+#include <linux/completion.h>
+#include <linux/dev_printk.h>
+#include <linux/errno.h>
#include <linux/i2c.h>
-#include <linux/pm_qos.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
#define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \
I2C_FUNC_SMBUS_BYTE | \
@@ -121,8 +127,6 @@
#define STATUS_WRITE_IN_PROGRESS 0x1
#define STATUS_READ_IN_PROGRESS 0x2
-#define TIMEOUT 20 /* ms */
-
/*
* operation modes
*/
@@ -171,13 +175,20 @@
DW_IC_TX_ABRT_TXDATA_NOACK | \
DW_IC_TX_ABRT_GCALL_NOACK)
+struct clk;
+struct device;
+struct reset_control;
/**
* struct dw_i2c_dev - private i2c-designware data
* @dev: driver model device node
+ * @map: IO registers map
+ * @sysmap: System controller registers map
* @base: IO registers pointer
+ * @ext: Extended IO registers pointer
* @cmd_complete: tx completion indicator
* @clk: input reference clock
+ * @pclk: clock required to access the registers
* @slave: represent an I2C slave device
* @cmd_err: run time hadware error code
* @msgs: points to an array of messages currently being transferred
@@ -209,14 +220,14 @@
* @fp_lcnt: fast plus LCNT value
* @hs_hcnt: high speed HCNT value
* @hs_lcnt: high speed LCNT value
- * @pm_qos: pm_qos_request used while holding a hardware lock on the bus
* @acquire_lock: function to acquire a hardware lock on the bus
* @release_lock: function to release a hardware lock on the bus
- * @pm_disabled: true if power-management should be disabled for this i2c-bus
+ * @shared_with_punit: true if this bus is shared with the SoCs PUNIT
* @disable: function to disable the controller
* @disable_int: function to disable all interrupts
* @init: function to initialize the I2C hardware
* @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
+ * @suspended: set to true if the controller is suspended
*
* HCNT and LCNT parameters can be used if the platform knows more accurate
* values than the one computed based only on the input clock frequency.
@@ -224,13 +235,16 @@
*/
struct dw_i2c_dev {
struct device *dev;
+ struct regmap *map;
+ struct regmap *sysmap;
void __iomem *base;
+ void __iomem *ext;
struct completion cmd_complete;
struct clk *clk;
+ struct clk *pclk;
struct reset_control *rst;
struct i2c_client *slave;
u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev);
- struct dw_pci_controller *controller;
int cmd_err;
struct i2c_msg *msgs;
int msgs_num;
@@ -262,26 +276,26 @@
u16 fp_lcnt;
u16 hs_hcnt;
u16 hs_lcnt;
- struct pm_qos_request pm_qos;
- int (*acquire_lock)(struct dw_i2c_dev *dev);
- void (*release_lock)(struct dw_i2c_dev *dev);
- bool pm_disabled;
+ int (*acquire_lock)(void);
+ void (*release_lock)(void);
+ bool shared_with_punit;
void (*disable)(struct dw_i2c_dev *dev);
void (*disable_int)(struct dw_i2c_dev *dev);
int (*init)(struct dw_i2c_dev *dev);
+ int (*set_sda_hold_time)(struct dw_i2c_dev *dev);
int mode;
struct i2c_bus_recovery_info rinfo;
+ bool suspended;
};
-#define ACCESS_SWAP 0x00000001
-#define ACCESS_16BIT 0x00000002
-#define ACCESS_INTR_MASK 0x00000004
+#define ACCESS_INTR_MASK 0x00000001
+#define ACCESS_NO_IRQ_SUSPEND 0x00000002
-#define MODEL_CHERRYTRAIL 0x00000100
+#define MODEL_MSCC_OCELOT 0x00000100
+#define MODEL_BAIKAL_BT1 0x00000200
+#define MODEL_MASK 0x00000f00
-u32 dw_readl(struct dw_i2c_dev *dev, int offset);
-void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
-int i2c_dw_set_reg_access(struct dw_i2c_dev *dev);
+int i2c_dw_init_regmap(struct dw_i2c_dev *dev);
u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev);
@@ -291,34 +305,66 @@
void i2c_dw_release_lock(struct dw_i2c_dev *dev);
int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev);
int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev);
+int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev);
u32 i2c_dw_func(struct i2c_adapter *adap);
void i2c_dw_disable(struct dw_i2c_dev *dev);
void i2c_dw_disable_int(struct dw_i2c_dev *dev);
static inline void __i2c_dw_enable(struct dw_i2c_dev *dev)
{
- dw_writel(dev, 1, DW_IC_ENABLE);
+ regmap_write(dev->map, DW_IC_ENABLE, 1);
}
static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
{
- dw_writel(dev, 0, DW_IC_ENABLE);
+ regmap_write(dev->map, DW_IC_ENABLE, 0);
}
void __i2c_dw_disable(struct dw_i2c_dev *dev);
-extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
-extern int i2c_dw_probe(struct dw_i2c_dev *dev);
+extern void i2c_dw_configure_master(struct dw_i2c_dev *dev);
+extern int i2c_dw_probe_master(struct dw_i2c_dev *dev);
+
#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE)
+extern void i2c_dw_configure_slave(struct dw_i2c_dev *dev);
extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev);
#else
+static inline void i2c_dw_configure_slave(struct dw_i2c_dev *dev) { }
static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
#endif
+static inline int i2c_dw_probe(struct dw_i2c_dev *dev)
+{
+ switch (dev->mode) {
+ case DW_IC_SLAVE:
+ return i2c_dw_probe_slave(dev);
+ case DW_IC_MASTER:
+ return i2c_dw_probe_master(dev);
+ default:
+ dev_err(dev->dev, "Wrong operation mode: %d\n", dev->mode);
+ return -EINVAL;
+ }
+}
+
+static inline void i2c_dw_configure(struct dw_i2c_dev *dev)
+{
+ if (i2c_detect_slave_mode(dev->dev))
+ i2c_dw_configure_slave(dev);
+ else
+ i2c_dw_configure_master(dev);
+}
+
#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
-extern void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev);
#else
static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; }
-static inline void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev) {}
+#endif
+
+int i2c_dw_validate_speed(struct dw_i2c_dev *dev);
+void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev);
+
+#if IS_ENABLED(CONFIG_ACPI)
+int i2c_dw_acpi_configure(struct device *device);
+#else
+static inline int i2c_dw_acpi_configure(struct device *device) { return -ENODEV; }
#endif
--
Gitblit v1.6.2