From a5969cabbb4660eab42b6ef0412cbbd1200cf14d Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 12 Oct 2024 07:10:09 +0000
Subject: [PATCH] 修改led为gpio
---
kernel/Documentation/admin-guide/init.rst | 70 ++++++++++++++++------------------
1 files changed, 33 insertions(+), 37 deletions(-)
diff --git a/kernel/Documentation/admin-guide/init.rst b/kernel/Documentation/admin-guide/init.rst
index e89d97f..41f06a0 100644
--- a/kernel/Documentation/admin-guide/init.rst
+++ b/kernel/Documentation/admin-guide/init.rst
@@ -1,52 +1,48 @@
-Explaining the dreaded "No init found." boot hang message
+Explaining the "No working init found." boot hang message
=========================================================
+:Authors: Andreas Mohr <andi at lisas period de>
+ Cristian Souza <cristianmsbr at gmail period com>
-OK, so you've got this pretty unintuitive message (currently located
-in init/main.c) and are wondering what the H*** went wrong.
-Some high-level reasons for failure (listed roughly in order of execution)
-to load the init binary are:
+This document provides some high-level reasons for failure
+(listed roughly in order of execution) to load the init binary.
-A) Unable to mount root FS
-B) init binary doesn't exist on rootfs
-C) broken console device
-D) binary exists but dependencies not available
-E) binary cannot be loaded
+1) **Unable to mount root FS**: Set "debug" kernel parameter (in bootloader
+ config file or CONFIG_CMDLINE) to get more detailed kernel messages.
-Detailed explanations:
+2) **init binary doesn't exist on rootfs**: Make sure you have the correct
+ root FS type (and ``root=`` kernel parameter points to the correct
+ partition), required drivers such as storage hardware (such as SCSI or
+ USB!) and filesystem (ext3, jffs2, etc.) are builtin (alternatively as
+ modules, to be pre-loaded by an initrd).
-A) Set "debug" kernel parameter (in bootloader config file or CONFIG_CMDLINE)
- to get more detailed kernel messages.
-B) make sure you have the correct root FS type
- (and ``root=`` kernel parameter points to the correct partition),
- required drivers such as storage hardware (such as SCSI or USB!)
- and filesystem (ext3, jffs2 etc.) are builtin (alternatively as modules,
- to be pre-loaded by an initrd)
-C) Possibly a conflict in ``console= setup`` --> initial console unavailable.
- E.g. some serial consoles are unreliable due to serial IRQ issues (e.g.
- missing interrupt-based configuration).
+3) **Broken console device**: Possibly a conflict in ``console= setup``
+ --> initial console unavailable. E.g. some serial consoles are unreliable
+ due to serial IRQ issues (e.g. missing interrupt-based configuration).
Try using a different ``console= device`` or e.g. ``netconsole=``.
-D) e.g. required library dependencies of the init binary such as
- ``/lib/ld-linux.so.2`` missing or broken. Use
- ``readelf -d <INIT>|grep NEEDED`` to find out which libraries are required.
-E) make sure the binary's architecture matches your hardware.
- E.g. i386 vs. x86_64 mismatch, or trying to load x86 on ARM hardware.
- In case you tried loading a non-binary file here (shell script?),
- you should make sure that the script specifies an interpreter in its shebang
- header line (``#!/...``) that is fully working (including its library
- dependencies). And before tackling scripts, better first test a simple
- non-script binary such as ``/bin/sh`` and confirm its successful execution.
- To find out more, add code ``to init/main.c`` to display kernel_execve()s
- return values.
+
+4) **Binary exists but dependencies not available**: E.g. required library
+ dependencies of the init binary such as ``/lib/ld-linux.so.2`` missing or
+ broken. Use ``readelf -d <INIT>|grep NEEDED`` to find out which libraries
+ are required.
+
+5) **Binary cannot be loaded**: Make sure the binary's architecture matches
+ your hardware. E.g. i386 vs. x86_64 mismatch, or trying to load x86 on ARM
+ hardware. In case you tried loading a non-binary file here (shell script?),
+ you should make sure that the script specifies an interpreter in its
+ shebang header line (``#!/...``) that is fully working (including its
+ library dependencies). And before tackling scripts, better first test a
+ simple non-script binary such as ``/bin/sh`` and confirm its successful
+ execution. To find out more, add code ``to init/main.c`` to display
+ kernel_execve()s return values.
Please extend this explanation whenever you find new failure causes
(after all loading the init binary is a CRITICAL and hard transition step
-which needs to be made as painless as possible), then submit patch to LKML.
+which needs to be made as painless as possible), then submit a patch to LKML.
Further TODOs:
- Implement the various ``run_init_process()`` invocations via a struct array
which can then store the ``kernel_execve()`` result value and on failure
log it all by iterating over **all** results (very important usability fix).
-- try to make the implementation itself more helpful in general,
- e.g. by providing additional error messages at affected places.
+- Try to make the implementation itself more helpful in general, e.g. by
+ providing additional error messages at affected places.
-Andreas Mohr <andi at lisas period de>
--
Gitblit v1.6.2