From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/drivers/scsi/qla4xxx/ql4_nx.c | 27 ++++++++++++---------------
1 files changed, 12 insertions(+), 15 deletions(-)
diff --git a/kernel/drivers/scsi/qla4xxx/ql4_nx.c b/kernel/drivers/scsi/qla4xxx/ql4_nx.c
index d2b333d..f1767b2 100644
--- a/kernel/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/kernel/drivers/scsi/qla4xxx/ql4_nx.c
@@ -1,8 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* QLogic iSCSI HBA Driver
* Copyright (c) 2003-2013 QLogic Corporation
- *
- * See LICENSE.qla4xxx for copyright and licensing details.
*/
#include <linux/delay.h>
#include <linux/io.h>
@@ -974,10 +973,10 @@
return ret;
}
-/**
+/*
* This routine does CRB initialize sequence
* to put the ISP into operational state
- **/
+ */
static int
qla4_82xx_pinit_from_rom(struct scsi_qla_host *ha, int verbose)
{
@@ -2645,7 +2644,7 @@
uint32_t addr1, addr2, value, data, temp, wrval;
uint8_t stride, stride2;
uint16_t count;
- uint32_t poll, mask, data_size, modify_mask;
+ uint32_t poll, mask, modify_mask;
uint32_t wait_count = 0;
uint32_t *data_ptr = *d_ptr;
struct qla8044_minidump_entry_rddfe *rddfe;
@@ -2661,7 +2660,6 @@
poll = le32_to_cpu(rddfe->poll);
mask = le32_to_cpu(rddfe->mask);
modify_mask = le32_to_cpu(rddfe->modify_mask);
- data_size = le32_to_cpu(rddfe->data_size);
addr2 = addr1 + stride;
@@ -2742,7 +2740,7 @@
uint8_t stride1, stride2;
uint32_t addr3, addr4, addr5, addr6, addr7;
uint16_t count, loop_cnt;
- uint32_t poll, mask;
+ uint32_t mask;
uint32_t *data_ptr = *d_ptr;
struct qla8044_minidump_entry_rdmdio *rdmdio;
@@ -2754,7 +2752,6 @@
stride2 = le32_to_cpu(rdmdio->stride_2);
count = le32_to_cpu(rdmdio->count);
- poll = le32_to_cpu(rdmdio->poll);
mask = le32_to_cpu(rdmdio->mask);
value2 = le32_to_cpu(rdmdio->value_2);
@@ -2813,7 +2810,7 @@
struct qla8xxx_minidump_entry_hdr *entry_hdr,
uint32_t **d_ptr)
{
- uint32_t addr1, addr2, value1, value2, poll, mask, r_value;
+ uint32_t addr1, addr2, value1, value2, poll, r_value;
struct qla8044_minidump_entry_pollwr *pollwr_hdr;
uint32_t wait_count = 0;
uint32_t rval = QLA_SUCCESS;
@@ -2825,7 +2822,6 @@
value2 = le32_to_cpu(pollwr_hdr->value_2);
poll = le32_to_cpu(pollwr_hdr->poll);
- mask = le32_to_cpu(pollwr_hdr->mask);
while (wait_count < poll) {
ha->isp_ops->rd_reg_indirect(ha, addr1, &r_value);
@@ -3220,6 +3216,7 @@
/**
* qla4_8xxx_uevent_emit - Send uevent when the firmware dump is ready.
* @ha: pointer to adapter structure
+ * @code: uevent code to act upon
**/
static void qla4_8xxx_uevent_emit(struct scsi_qla_host *ha, u32 code)
{
@@ -3228,7 +3225,7 @@
switch (code) {
case QL4_UEVENT_CODE_FW_DUMP:
- snprintf(event_string, sizeof(event_string), "FW_DUMP=%ld",
+ snprintf(event_string, sizeof(event_string), "FW_DUMP=%lu",
ha->host_no);
break;
default:
@@ -3688,9 +3685,9 @@
return dwptr;
}
-/**
+/*
* Address and length are byte address
- **/
+ */
static uint8_t *
qla4_82xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
uint32_t offset, uint32_t length)
@@ -4052,8 +4049,8 @@
dma_addr_t sys_info_dma;
int status = QLA_ERROR;
- sys_info = dma_zalloc_coherent(&ha->pdev->dev, sizeof(*sys_info),
- &sys_info_dma, GFP_KERNEL);
+ sys_info = dma_alloc_coherent(&ha->pdev->dev, sizeof(*sys_info),
+ &sys_info_dma, GFP_KERNEL);
if (sys_info == NULL) {
DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
ha->host_no, __func__));
--
Gitblit v1.6.2