From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/drivers/scsi/libfc/fc_fcp.c | 39 +++++++++++++--------------------------
1 files changed, 13 insertions(+), 26 deletions(-)
diff --git a/kernel/drivers/scsi/libfc/fc_fcp.c b/kernel/drivers/scsi/libfc/fc_fcp.c
index 4fae253..7cfeb68 100644
--- a/kernel/drivers/scsi/libfc/fc_fcp.c
+++ b/kernel/drivers/scsi/libfc/fc_fcp.c
@@ -1,20 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2007 Intel Corporation. All rights reserved.
* Copyright(c) 2008 Red Hat, Inc. All rights reserved.
* Copyright(c) 2008 Mike Christie
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Maintained at www.Open-FCoE.org
*/
@@ -301,6 +289,7 @@
/**
* fc_fcp_retry_cmd() - Retry a fcp_pkt
* @fsp: The FCP packet to be retried
+ * @status_code: The FCP status code to set
*
* Sets the status code to be FC_ERROR and then calls
* fc_fcp_complete_locked() which in turn calls fc_io_compl().
@@ -592,7 +581,7 @@
/**
* fc_fcp_send_data() - Send SCSI data to a target
* @fsp: The FCP packet the data is on
- * @sp: The sequence the data is to be sent on
+ * @seq: The sequence the data is to be sent on
* @offset: The starting offset for this data request
* @seq_blen: The burst length for this data request
*
@@ -763,7 +752,7 @@
brp = fc_frame_payload_get(fp, sizeof(*brp));
if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
break;
- /* fall thru */
+ fallthrough;
default:
/*
* we will let the command timeout
@@ -1295,7 +1284,7 @@
/**
* fc_lun_reset_send() - Send LUN reset command
- * @data: The FCP packet that identifies the LUN to be reset
+ * @t: Timer context used to fetch the FSP packet
*/
static void fc_lun_reset_send(struct timer_list *t)
{
@@ -1421,7 +1410,7 @@
/**
* fc_fcp_timeout() - Handler for fcp_pkt timeouts
- * @data: The FCP packet that has timed out
+ * @t: Timer context used to fetch the FSP packet
*
* If REC is supported then just issue it and return. The REC exchange will
* complete or time out and recovery can continue at that point. Otherwise,
@@ -1547,7 +1536,7 @@
"device %x invalid REC reject %d/%d\n",
fsp->rport->port_id, rjt->er_reason,
rjt->er_explan);
- /* fall through */
+ fallthrough;
case ELS_RJT_UNSUP:
FC_FCP_DBG(fsp, "device does not support REC\n");
rpriv = fsp->rport->dd_data;
@@ -1679,7 +1668,7 @@
FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
fsp, fsp->rport->port_id, error);
fsp->status_code = FC_CMD_PLOGO;
- /* fall through */
+ fallthrough;
case -FC_EX_TIMEOUT:
/*
@@ -1703,6 +1692,7 @@
/**
* fc_fcp_recovery() - Handler for fcp_pkt recovery
* @fsp: The FCP pkt that needs to be aborted
+ * @code: The FCP status code to set
*/
static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
{
@@ -1721,6 +1711,7 @@
* fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
* @fsp: The FCP packet the SRR is to be sent on
* @r_ctl: The R_CTL field for the SRR request
+ * @offset: The SRR relative offset
* This is called after receiving status but insufficient data, or
* when expecting status but the request has timed out.
*/
@@ -1839,7 +1830,7 @@
break;
case -FC_EX_CLOSED: /* e.g., link failure */
FC_FCP_DBG(fsp, "SRR error, exchange closed\n");
- /* fall through */
+ fallthrough;
default:
fc_fcp_retry_cmd(fsp, FC_ERROR);
break;
@@ -1863,7 +1854,7 @@
/**
* fc_queuecommand() - The queuecommand function of the SCSI template
* @shost: The Scsi_Host that the command was issued to
- * @cmd: The scsi_cmnd to be executed
+ * @sc_cmd: The scsi_cmnd to be executed
*
* This is the i/o strategy routine, called by the SCSI layer.
*/
@@ -1872,7 +1863,6 @@
struct fc_lport *lport = shost_priv(shost);
struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
struct fc_fcp_pkt *fsp;
- struct fc_rport_libfc_priv *rpriv;
int rval;
int rc = 0;
struct fc_stats *stats;
@@ -1893,8 +1883,6 @@
sc_cmd->scsi_done(sc_cmd);
goto out;
}
-
- rpriv = rport->dd_data;
if (!fc_fcp_lport_queue_ready(lport)) {
if (lport->qfull) {
@@ -2295,8 +2283,7 @@
void fc_destroy_fcp(void)
{
- if (scsi_pkt_cachep)
- kmem_cache_destroy(scsi_pkt_cachep);
+ kmem_cache_destroy(scsi_pkt_cachep);
}
/**
--
Gitblit v1.6.2