From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001 From: hc <hc@nodka.com> Date: Mon, 13 May 2024 10:30:14 +0000 Subject: [PATCH] modify sin led gpio --- kernel/drivers/net/wireless/broadcom/b43legacy/Kconfig | 11 ++++++----- 1 files changed, 6 insertions(+), 5 deletions(-) diff --git a/kernel/drivers/net/wireless/broadcom/b43legacy/Kconfig b/kernel/drivers/net/wireless/broadcom/b43legacy/Kconfig index 1ffa288..e4da34e 100644 --- a/kernel/drivers/net/wireless/broadcom/b43legacy/Kconfig +++ b/kernel/drivers/net/wireless/broadcom/b43legacy/Kconfig @@ -1,9 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0-only config B43LEGACY tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)" depends on SSB_POSSIBLE && MAC80211 && HAS_DMA select SSB select FW_LOADER - ---help--- + help b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and BCM4303) and early model 802.11g chips (BCM4306 Ver. 2) used in the Linksys WPC54G V1 PCMCIA devices. @@ -53,7 +54,7 @@ bool "Broadcom 43xx-legacy debugging" depends on B43LEGACY default y - ---help--- + help Say Y, because this information will help you get the driver running. This option generates a minimum of log output. @@ -74,7 +75,7 @@ bool "DMA + PIO" select B43LEGACY_DMA select B43LEGACY_PIO - ---help--- + help Include both, Direct Memory Access (DMA) and Programmed I/O (PIO) data transfer modes. The mode actually used is selectable through the module parameter "pio". With pio=0 as a module parameter, the @@ -85,14 +86,14 @@ config B43LEGACY_DMA_MODE bool "DMA (Direct Memory Access) only" select B43LEGACY_DMA - ---help--- + help Only include Direct Memory Access (DMA). This reduces the size of the driver module, by omitting the PIO code. config B43LEGACY_PIO_MODE bool "PIO (Programmed I/O) only" select B43LEGACY_PIO - ---help--- + help Only include Programmed I/O (PIO). This reduces the size of the driver module, by omitting the DMA code. Please note that PIO transfers are slow (compared to DMA). -- Gitblit v1.6.2