From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/drivers/net/ethernet/3com/3c509.c | 13 ++++---------
1 files changed, 4 insertions(+), 9 deletions(-)
diff --git a/kernel/drivers/net/ethernet/3com/3c509.c b/kernel/drivers/net/ethernet/3com/3c509.c
index b223769..667f38c 100644
--- a/kernel/drivers/net/ethernet/3com/3c509.c
+++ b/kernel/drivers/net/ethernet/3com/3c509.c
@@ -60,8 +60,6 @@
*/
#define DRV_NAME "3c509"
-#define DRV_VERSION "1.20"
-#define DRV_RELDATE "04Feb2008"
/* A few values that may be tweaked. */
@@ -91,8 +89,6 @@
#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/irq.h>
-
-static char version[] = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n";
#ifdef EL3_DEBUG
static int el3_debug = EL3_DEBUG;
@@ -196,7 +192,7 @@
static int el3_rx(struct net_device *dev);
static int el3_close(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
-static void el3_tx_timeout (struct net_device *dev);
+static void el3_tx_timeout (struct net_device *dev, unsigned int txqueue);
static void el3_down(struct net_device *dev);
static void el3_up(struct net_device *dev);
static const struct ethtool_ops ethtool_ops;
@@ -547,8 +543,6 @@
dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)],
dev->dev_addr, dev->irq);
- if (el3_debug > 0)
- pr_info("%s", version);
return 0;
}
@@ -689,7 +683,7 @@
}
static void
-el3_tx_timeout (struct net_device *dev)
+el3_tx_timeout (struct net_device *dev, unsigned int txqueue)
{
int ioaddr = dev->base_addr;
@@ -1143,7 +1137,6 @@
static void el3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
- strlcpy(info->version, DRV_VERSION, sizeof(info->version));
}
static int el3_get_link_ksettings(struct net_device *dev,
@@ -1266,12 +1259,14 @@
pr_cont("Forcing 3c5x9b full-duplex mode");
break;
}
+ fallthrough;
case 8:
/* set full-duplex mode based on eeprom config setting */
if ((sw_info & 0x000f) && (sw_info & 0x8000)) {
pr_cont("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)");
break;
}
+ fallthrough;
default:
/* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */
pr_cont("Setting 3c5x9/3c5x9B half-duplex mode");
--
Gitblit v1.6.2