From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/drivers/mmc/host/sdhci-spear.c | 37 ++++++-------------------------------
1 files changed, 6 insertions(+), 31 deletions(-)
diff --git a/kernel/drivers/mmc/host/sdhci-spear.c b/kernel/drivers/mmc/host/sdhci-spear.c
index ba99f1b..d463e2f 100644
--- a/kernel/drivers/mmc/host/sdhci-spear.c
+++ b/kernel/drivers/mmc/host/sdhci-spear.c
@@ -15,13 +15,11 @@
#include <linux/clk.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
#include <linux/highmem.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/slab.h>
@@ -32,7 +30,6 @@
struct spear_sdhci {
struct clk *clk;
- int card_int_gpio;
};
/* sdhci ops */
@@ -43,22 +40,9 @@
.set_uhs_signaling = sdhci_set_uhs_signaling,
};
-static void sdhci_probe_config_dt(struct device_node *np,
- struct spear_sdhci *host)
-{
- int cd_gpio;
-
- cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
- if (!gpio_is_valid(cd_gpio))
- cd_gpio = -1;
-
- host->card_int_gpio = cd_gpio;
-}
-
static int sdhci_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
- struct resource *iomem;
struct spear_sdhci *sdhci;
struct device *dev;
int ret;
@@ -71,8 +55,7 @@
goto err;
}
- iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem);
+ host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(host->ioaddr)) {
ret = PTR_ERR(host->ioaddr);
dev_dbg(&pdev->dev, "unable to map iomem: %d\n", ret);
@@ -109,21 +92,13 @@
dev_dbg(&pdev->dev, "Error setting desired clk, clk=%lu\n",
clk_get_rate(sdhci->clk));
- sdhci_probe_config_dt(pdev->dev.of_node, sdhci);
/*
- * It is optional to use GPIOs for sdhci card detection. If
- * sdhci->card_int_gpio < 0, then use original sdhci lines otherwise
- * GPIO lines. We use the built-in GPIO support for this.
+ * It is optional to use GPIOs for sdhci card detection. If we
+ * find a descriptor using slot GPIO, we use it.
*/
- if (sdhci->card_int_gpio >= 0) {
- ret = mmc_gpio_request_cd(host->mmc, sdhci->card_int_gpio, 0);
- if (ret < 0) {
- dev_dbg(&pdev->dev,
- "failed to request card-detect gpio%d\n",
- sdhci->card_int_gpio);
- goto disable_clk;
- }
- }
+ ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0);
+ if (ret == -EPROBE_DEFER)
+ goto disable_clk;
ret = sdhci_add_host(host);
if (ret)
--
Gitblit v1.6.2