From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/drivers/mmc/host/dw_mmc-exynos.c | 22 ++++++++++++++++------
1 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/kernel/drivers/mmc/host/dw_mmc-exynos.c b/kernel/drivers/mmc/host/dw_mmc-exynos.c
index d7915e5..1f8a3c0 100644
--- a/kernel/drivers/mmc/host/dw_mmc-exynos.c
+++ b/kernel/drivers/mmc/host/dw_mmc-exynos.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Exynos Specific Extensions for Synopsys DW Multimedia Card Interface driver
*
* Copyright (C) 2012, Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#include <linux/module.h>
@@ -180,6 +176,7 @@
#ifdef CONFIG_PM_SLEEP
/**
* dw_mci_exynos_suspend_noirq - Exynos-specific suspend code
+ * @dev: Device to suspend (this device)
*
* This ensures that device will be in runtime active state in
* dw_mci_exynos_resume_noirq after calling pm_runtime_force_resume()
@@ -192,6 +189,7 @@
/**
* dw_mci_exynos_resume_noirq - Exynos-specific resume code
+ * @dev: Device to resume (this device)
*
* On exynos5420 there is a silicon errata that will sometimes leave the
* WAKEUP_INT bit in the CLKSEL register asserted. This bit is 1 to indicate
@@ -253,6 +251,8 @@
if (timing == MMC_TIMING_MMC_HS400) {
dqs |= DATA_STROBE_EN;
strobe = DQS_CTRL_RD_DELAY(strobe, priv->dqs_delay);
+ } else if (timing == MMC_TIMING_UHS_SDR104) {
+ dqs &= 0xffffff00;
} else {
dqs &= ~DATA_STROBE_EN;
}
@@ -311,6 +311,15 @@
/* Should be double rate for DDR mode */
if (ios->bus_width == MMC_BUS_WIDTH_8)
wanted <<= 1;
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_UHS_SDR50:
+ clksel = (priv->sdr_timing & 0xfff8ffff) |
+ (priv->ciu_div << 16);
+ break;
+ case MMC_TIMING_UHS_DDR50:
+ clksel = (priv->ddr_timing & 0xfff8ffff) |
+ (priv->ciu_div << 16);
break;
default:
clksel = priv->sdr_timing;
@@ -477,7 +486,7 @@
struct dw_mci_exynos_priv_data *priv = host->priv;
struct mmc_host *mmc = slot->mmc;
u8 start_smpl, smpl, candiates = 0;
- s8 found = -1;
+ s8 found;
int ret = 0;
start_smpl = dw_mci_exynos_get_clksmpl(host);
@@ -597,6 +606,7 @@
.remove = dw_mci_exynos_remove,
.driver = {
.name = "dwmmc_exynos",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = dw_mci_exynos_match,
.pm = &dw_mci_exynos_pmops,
},
--
Gitblit v1.6.2