From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/drivers/mmc/host/au1xmmc.c | 35 ++++++++---------------------------
1 files changed, 8 insertions(+), 27 deletions(-)
diff --git a/kernel/drivers/mmc/host/au1xmmc.c b/kernel/drivers/mmc/host/au1xmmc.c
index 9b4be67..56a3bf5 100644
--- a/kernel/drivers/mmc/host/au1xmmc.c
+++ b/kernel/drivers/mmc/host/au1xmmc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/drivers/mmc/host/au1xmmc.c - AU1XX0 MMC driver
*
@@ -16,9 +17,6 @@
* All Rights Reserved.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
/* Why don't we use the SD controllers' carddetect feature?
@@ -261,7 +259,7 @@
au1xmmc_finish_request(host);
}
-static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
+static int au1xmmc_send_command(struct au1xmmc_host *host,
struct mmc_command *cmd, struct mmc_data *data)
{
u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
@@ -304,28 +302,12 @@
__raw_writel(cmd->arg, HOST_CMDARG(host));
wmb(); /* drain writebuffer */
- if (wait)
- IRQ_OFF(host, SD_CONFIG_CR);
-
__raw_writel((mmccmd | SD_CMD_GO), HOST_CMD(host));
wmb(); /* drain writebuffer */
/* Wait for the command to go on the line */
while (__raw_readl(HOST_CMD(host)) & SD_CMD_GO)
/* nop */;
-
- /* Wait for the command to come back */
- if (wait) {
- u32 status = __raw_readl(HOST_STATUS(host));
-
- while (!(status & SD_STATUS_CR))
- status = __raw_readl(HOST_STATUS(host));
-
- /* Clear the CR status */
- __raw_writel(SD_STATUS_CR, HOST_STATUS(host));
-
- IRQ_ON(host, SD_CONFIG_CR);
- }
return 0;
}
@@ -713,7 +695,7 @@
}
if (!ret)
- ret = au1xmmc_send_command(host, 0, mrq->cmd, mrq->data);
+ ret = au1xmmc_send_command(host, mrq->cmd, mrq->data);
if (ret) {
mrq->cmd->error = ret;
@@ -986,12 +968,9 @@
goto out2;
}
- r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!r) {
- dev_err(&pdev->dev, "no IRQ defined\n");
+ host->irq = platform_get_irq(pdev, 0);
+ if (host->irq < 0)
goto out3;
- }
- host->irq = r->start;
mmc->ops = &au1xmmc_ops;
@@ -1118,8 +1097,9 @@
if (host->platdata && host->platdata->cd_setup &&
!(mmc->caps & MMC_CAP_NEEDS_POLL))
host->platdata->cd_setup(mmc, 0);
-out_clk:
+
clk_disable_unprepare(host->clk);
+out_clk:
clk_put(host->clk);
out_irq:
free_irq(host->irq, host);
@@ -1210,6 +1190,7 @@
.resume = au1xmmc_resume,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
--
Gitblit v1.6.2