From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/drivers/misc/ti-st/st_core.c | 102 +++++++++++++++++++++++++++------------------------
1 files changed, 54 insertions(+), 48 deletions(-)
diff --git a/kernel/drivers/misc/ti-st/st_core.c b/kernel/drivers/misc/ti-st/st_core.c
index eda8d40..f4ddd1e 100644
--- a/kernel/drivers/misc/ti-st/st_core.c
+++ b/kernel/drivers/misc/ti-st/st_core.c
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Shared Transport Line discipline driver Core
* This hooks up ST KIM driver and ST LL driver
* Copyright (C) 2009-2010 Texas Instruments
* Author: Pavan Savoy <pavan_savoy@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#define pr_fmt(fmt) "(stc): " fmt
@@ -31,7 +18,8 @@
extern void st_kim_recv(void *, const unsigned char *, long);
void st_int_recv(void *, const unsigned char *, long);
-/* function pointer pointing to either,
+/*
+ * function pointer pointing to either,
* st_kim_recv during registration to receive fw download responses
* st_int_recv after registration to receive proto stack responses
*/
@@ -73,7 +61,8 @@
return tty->ops->write_room(tty);
}
-/* can be called in from
+/*
+ * can be called in from
* -- KIM (during fw download)
* -- ST Core (during st_write)
*
@@ -113,7 +102,8 @@
kfree_skb(st_gdata->rx_skb);
return;
}
- /* this cannot fail
+ /*
+ * this cannot fail
* this shouldn't take long
* - should be just skb_queue_tail for the
* protocol stack driver
@@ -134,9 +124,8 @@
return;
}
-/**
- * st_reg_complete -
- * to call registration complete callbacks
+/*
+ * st_reg_complete - to call registration complete callbacks
* of all protocol stack drivers
* This function is being called with spin lock held, protocol drivers are
* only expected to complete their waits and do nothing more than that.
@@ -169,21 +158,24 @@
pr_debug("len %d room %d", len, room);
if (!len) {
- /* Received packet has only packet header and
+ /*
+ * Received packet has only packet header and
* has zero length payload. So, ask ST CORE to
* forward the packet to protocol driver (BT/FM/GPS)
*/
st_send_frame(chnl_id, st_gdata);
} else if (len > room) {
- /* Received packet's payload length is larger.
+ /*
+ * Received packet's payload length is larger.
* We can't accommodate it in created skb.
*/
pr_err("Data length is too large len %d room %d", len,
room);
kfree_skb(st_gdata->rx_skb);
} else {
- /* Packet header has non-zero payload length and
+ /*
+ * Packet header has non-zero payload length and
* we have enough space in created skb. Lets read
* payload data */
st_gdata->rx_state = ST_W4_DATA;
@@ -191,8 +183,7 @@
return len;
}
- /* Change ST state to continue to process next
- * packet */
+ /* Change ST state to continue to process next packet */
st_gdata->rx_state = ST_W4_PACKET_TYPE;
st_gdata->rx_skb = NULL;
st_gdata->rx_count = 0;
@@ -201,7 +192,7 @@
return 0;
}
-/**
+/*
* st_wakeup_ack - internal function for action when wake-up ack
* received
*/
@@ -212,7 +203,8 @@
unsigned long flags = 0;
spin_lock_irqsave(&st_gdata->lock, flags);
- /* de-Q from waitQ and Q in txQ now that the
+ /*
+ * de-Q from waitQ and Q in txQ now that the
* chip is awake
*/
while ((waiting_skb = skb_dequeue(&st_gdata->tx_waitq)))
@@ -226,7 +218,7 @@
st_tx_wakeup(st_gdata);
}
-/**
+/*
* st_int_recv - ST's internal receive function.
* Decodes received RAW data and forwards to corresponding
* client drivers (Bluetooth,FM,GPS..etc).
@@ -275,8 +267,10 @@
/* Waiting for complete packet ? */
case ST_W4_DATA:
pr_debug("Complete pkt received");
- /* Ask ST CORE to forward
- * the packet to protocol driver */
+ /*
+ * Ask ST CORE to forward
+ * the packet to protocol driver
+ */
st_send_frame(st_gdata->rx_chnl, st_gdata);
st_gdata->rx_state = ST_W4_PACKET_TYPE;
@@ -289,7 +283,7 @@
&st_gdata->rx_skb->data
[proto->offset_len_in_hdr];
pr_debug("plen pointing to %x\n", *plen);
- if (proto->len_size == 1)/* 1 byte len field */
+ if (proto->len_size == 1) /* 1 byte len field */
payload_len = *(unsigned char *)plen;
else if (proto->len_size == 2)
payload_len =
@@ -307,18 +301,23 @@
}
/* end of if rx_count */
- /* Check first byte of packet and identify module
- * owner (BT/FM/GPS) */
+
+ /*
+ * Check first byte of packet and identify module
+ * owner (BT/FM/GPS)
+ */
switch (*ptr) {
case LL_SLEEP_IND:
case LL_SLEEP_ACK:
case LL_WAKE_UP_IND:
pr_debug("PM packet");
- /* this takes appropriate action based on
+ /*
+ * this takes appropriate action based on
* sleep state received --
*/
st_ll_sleep_state(st_gdata, *ptr);
- /* if WAKEUP_IND collides copy from waitq to txq
+ /*
+ * if WAKEUP_IND collides copy from waitq to txq
* and assume chip awake
*/
spin_unlock_irqrestore(&st_gdata->lock, flags);
@@ -344,7 +343,8 @@
default:
type = *ptr;
- /* Default case means non-HCILL packets,
+ /*
+ * Default case means non-HCILL packets,
* possibilities are packets for:
* (a) valid protocol - Supported Protocols within
* the ST_MAX_CHANNELS.
@@ -390,7 +390,7 @@
return;
}
-/**
+/*
* st_int_dequeue - internal de-Q function.
* If the previous data set was not written
* completely, return that skb which has the pending data.
@@ -409,7 +409,7 @@
return skb_dequeue(&st_gdata->txq);
}
-/**
+/*
* st_int_enqueue - internal Q-ing function.
* Will either Q the skb to txq or the tx_waitq
* depending on the ST LL state.
@@ -574,7 +574,8 @@
/* release lock previously held - re-locked below */
spin_unlock_irqrestore(&st_gdata->lock, flags);
- /* this may take a while to complete
+ /*
+ * this may take a while to complete
* since it involves BT fw download
*/
err = st_kim_start(st_gdata->kim_data);
@@ -596,7 +597,8 @@
clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
st_recv = st_int_recv;
- /* this is where all pending registration
+ /*
+ * this is where all pending registration
* are signalled to be complete by calling callback functions
*/
if ((st_gdata->protos_registered != ST_EMPTY) &&
@@ -606,7 +608,8 @@
}
clear_bit(ST_REG_PENDING, &st_gdata->st_state);
- /* check for already registered once more,
+ /*
+ * check for already registered once more,
* since the above check is old
*/
if (st_gdata->is_registered[new_proto->chnl_id] == true) {
@@ -635,7 +638,8 @@
}
EXPORT_SYMBOL_GPL(st_register);
-/* to unregister a protocol -
+/*
+ * to unregister a protocol -
* to be called from protocol stack driver
*/
long st_unregister(struct st_proto_s *proto)
@@ -721,7 +725,6 @@
*/
static int st_tty_open(struct tty_struct *tty)
{
- int err = 0;
struct st_data_s *st_gdata;
pr_info("%s ", __func__);
@@ -744,18 +747,20 @@
*/
st_kim_complete(st_gdata->kim_data);
pr_debug("done %s", __func__);
- return err;
+
+ return 0;
}
static void st_tty_close(struct tty_struct *tty)
{
- unsigned char i = ST_MAX_CHANNELS;
- unsigned long flags = 0;
+ unsigned char i;
+ unsigned long flags;
struct st_data_s *st_gdata = tty->disc_data;
pr_info("%s ", __func__);
- /* TODO:
+ /*
+ * TODO:
* if a protocol has been registered & line discipline
* un-installed for some reason - what should be done ?
*/
@@ -808,7 +813,8 @@
pr_debug("done %s", __func__);
}
-/* wake-up function called in from the TTY layer
+/*
+ * wake-up function called in from the TTY layer
* inside the internal wakeup function will be called
*/
static void st_tty_wakeup(struct tty_struct *tty)
--
Gitblit v1.6.2