From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/drivers/iio/light/cros_ec_light_prox.c | 91 ++++++++++++++++++---------------------------
1 files changed, 37 insertions(+), 54 deletions(-)
diff --git a/kernel/drivers/iio/light/cros_ec_light_prox.c b/kernel/drivers/iio/light/cros_ec_light_prox.c
index fd1609e..75d6b5f 100644
--- a/kernel/drivers/iio/light/cros_ec_light_prox.c
+++ b/kernel/drivers/iio/light/cros_ec_light_prox.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* cros_ec_light_prox - Driver for light and prox sensors behing CrosEC.
*
* Copyright (C) 2017 Google, Inc
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
-#include <linux/delay.h>
#include <linux/device.h>
#include <linux/iio/buffer.h>
#include <linux/iio/common/cros_ec_sensors_core.h>
@@ -23,12 +14,11 @@
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/kernel.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/sysfs.h>
/*
* We only represent one entry for light or proximity. EC is merging different
@@ -52,7 +42,7 @@
struct cros_ec_light_prox_state *st = iio_priv(indio_dev);
u16 data = 0;
s64 val64;
- int ret = IIO_VAL_INT;
+ int ret;
int idx = chan->scan_index;
mutex_lock(&st->core.cmd_lock);
@@ -60,23 +50,22 @@
switch (mask) {
case IIO_CHAN_INFO_RAW:
if (chan->type == IIO_PROXIMITY) {
- if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
- (s16 *)&data) < 0) {
- ret = -EIO;
+ ret = cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
+ (s16 *)&data);
+ if (ret)
break;
- }
*val = data;
+ ret = IIO_VAL_INT;
} else {
ret = -EINVAL;
}
break;
case IIO_CHAN_INFO_PROCESSED:
if (chan->type == IIO_LIGHT) {
- if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
- (s16 *)&data) < 0) {
- ret = -EIO;
+ ret = cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
+ (s16 *)&data);
+ if (ret)
break;
- }
/*
* The data coming from the light sensor is
* pre-processed and represents the ambient light
@@ -92,15 +81,16 @@
st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
st->core.param.sensor_offset.flags = 0;
- if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
- ret = -EIO;
+ ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+ if (ret)
break;
- }
/* Save values */
- st->core.calib[0] = st->core.resp->sensor_offset.offset[0];
+ st->core.calib[0].offset =
+ st->core.resp->sensor_offset.offset[0];
- *val = st->core.calib[idx];
+ *val = st->core.calib[idx].offset;
+ ret = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_CALIBSCALE:
/*
@@ -111,10 +101,9 @@
st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE;
- if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
- ret = -EIO;
+ ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+ if (ret)
break;
- }
val64 = st->core.resp->sensor_range.ret;
*val = val64 >> 16;
@@ -137,28 +126,30 @@
int val, int val2, long mask)
{
struct cros_ec_light_prox_state *st = iio_priv(indio_dev);
- int ret = 0;
+ int ret;
int idx = chan->scan_index;
mutex_lock(&st->core.cmd_lock);
switch (mask) {
case IIO_CHAN_INFO_CALIBBIAS:
- st->core.calib[idx] = val;
+ st->core.calib[idx].offset = val;
/* Send to EC for each axis, even if not complete */
st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
st->core.param.sensor_offset.flags = MOTION_SENSE_SET_OFFSET;
- st->core.param.sensor_offset.offset[0] = st->core.calib[0];
+ st->core.param.sensor_offset.offset[0] =
+ st->core.calib[0].offset;
st->core.param.sensor_offset.temp =
EC_MOTION_SENSE_INVALID_CALIB_TEMP;
- if (cros_ec_motion_send_host_cmd(&st->core, 0))
- ret = -EIO;
+ ret = cros_ec_motion_send_host_cmd(&st->core, 0);
break;
case IIO_CHAN_INFO_CALIBSCALE:
st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
- st->core.param.sensor_range.data = (val << 16) | (val2 / 100);
- if (cros_ec_motion_send_host_cmd(&st->core, 0))
- ret = -EIO;
+ st->core.curr_range = (val << 16) | (val2 / 100);
+ st->core.param.sensor_range.data = st->core.curr_range;
+ ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+ if (ret == 0)
+ st->core.range_updated = true;
break;
default:
ret = cros_ec_sensors_core_write(&st->core, chan, val, val2,
@@ -174,27 +165,25 @@
static const struct iio_info cros_ec_light_prox_info = {
.read_raw = &cros_ec_light_prox_read,
.write_raw = &cros_ec_light_prox_write,
+ .read_avail = &cros_ec_sensors_core_read_avail,
};
static int cros_ec_light_prox_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
struct iio_dev *indio_dev;
struct cros_ec_light_prox_state *state;
struct iio_chan_spec *channel;
int ret;
- if (!ec_dev || !ec_dev->ec_dev) {
- dev_warn(dev, "No CROS EC device found.\n");
- return -EINVAL;
- }
-
indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
if (!indio_dev)
return -ENOMEM;
- ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+ ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
+ cros_ec_sensors_capture,
+ cros_ec_sensors_push_data,
+ true);
if (ret)
return ret;
@@ -206,16 +195,15 @@
/* Common part */
channel->info_mask_shared_by_all =
- BIT(IIO_CHAN_INFO_SAMP_FREQ) |
- BIT(IIO_CHAN_INFO_FREQUENCY);
+ BIT(IIO_CHAN_INFO_SAMP_FREQ);
+ channel->info_mask_shared_by_all_available =
+ BIT(IIO_CHAN_INFO_SAMP_FREQ);
channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
channel->scan_type.shift = 0;
channel->scan_index = 0;
channel->ext_info = cros_ec_sensors_ext_info;
channel->scan_type.sign = 'u';
-
- state->core.calib[0] = 0;
/* Sensor specific */
switch (state->core.type) {
@@ -252,11 +240,6 @@
indio_dev->num_channels = CROS_EC_LIGHT_PROX_MAX_CHANNELS;
state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
-
- ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
- cros_ec_sensors_capture, NULL);
- if (ret)
- return ret;
return devm_iio_device_register(dev, indio_dev);
}
--
Gitblit v1.6.2