From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 93 ++++++++++------------------------------------
1 files changed, 20 insertions(+), 73 deletions(-)
diff --git a/kernel/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/kernel/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 0e54f2d..45c3752 100644
--- a/kernel/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/kernel/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Invensense, Inc.
-*
-* This software is licensed under the terms of the GNU General Public
-* License version 2, as published by the Free Software Foundation, and
-* may be copied, distributed, and modified under those terms.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
*/
#include <linux/module.h>
@@ -21,7 +13,6 @@
#include <linux/interrupt.h>
#include <linux/poll.h>
#include <linux/math64.h>
-#include <asm/unaligned.h>
#include "inv_mpu_iio.h"
/**
@@ -98,58 +89,14 @@
return ts;
}
-int inv_reset_fifo(struct iio_dev *indio_dev)
+static int inv_reset_fifo(struct iio_dev *indio_dev)
{
int result;
- u8 d;
struct inv_mpu6050_state *st = iio_priv(indio_dev);
- /* reset it timestamp validation */
- st->it_timestamp = 0;
-
- /* disable interrupt */
- result = regmap_write(st->map, st->reg->int_enable, 0);
- if (result) {
- dev_err(regmap_get_device(st->map), "int_enable failed %d\n",
- result);
- return result;
- }
- /* disable the sensor output to FIFO */
- result = regmap_write(st->map, st->reg->fifo_en, 0);
- if (result)
- goto reset_fifo_fail;
- /* disable fifo reading */
- result = regmap_write(st->map, st->reg->user_ctrl,
- st->chip_config.user_ctrl);
- if (result)
- goto reset_fifo_fail;
-
- /* reset FIFO*/
- d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST;
- result = regmap_write(st->map, st->reg->user_ctrl, d);
- if (result)
- goto reset_fifo_fail;
-
- /* enable interrupt */
- if (st->chip_config.accl_fifo_enable ||
- st->chip_config.gyro_fifo_enable) {
- result = regmap_write(st->map, st->reg->int_enable,
- INV_MPU6050_BIT_DATA_RDY_EN);
- if (result)
- return result;
- }
- /* enable FIFO reading */
- d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_EN;
- result = regmap_write(st->map, st->reg->user_ctrl, d);
- if (result)
- goto reset_fifo_fail;
- /* enable sensor output to FIFO */
- d = 0;
- if (st->chip_config.gyro_fifo_enable)
- d |= INV_MPU6050_BITS_GYRO_OUT;
- if (st->chip_config.accl_fifo_enable)
- d |= INV_MPU6050_BIT_ACCEL_OUT;
- result = regmap_write(st->map, st->reg->fifo_en, d);
+ /* disable fifo and reenable it */
+ inv_mpu6050_prepare_fifo(st, false);
+ result = inv_mpu6050_prepare_fifo(st, true);
if (result)
goto reset_fifo_fail;
@@ -163,7 +110,7 @@
return result;
}
-/**
+/*
* inv_mpu6050_read_fifo() - Transfer data from hardware FIFO to KFIFO.
*/
irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
@@ -173,7 +120,6 @@
struct inv_mpu6050_state *st = iio_priv(indio_dev);
size_t bytes_per_datum;
int result;
- u8 data[INV_MPU6050_OUTPUT_DATA_SIZE];
u16 fifo_count;
s64 timestamp;
int int_status;
@@ -188,14 +134,12 @@
"failed to ack interrupt\n");
goto flush_fifo;
}
- if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT)) {
- dev_warn(regmap_get_device(st->map),
- "spurious interrupt with status 0x%x\n", int_status);
+ if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT))
goto end_session;
- }
if (!(st->chip_config.accl_fifo_enable |
- st->chip_config.gyro_fifo_enable))
+ st->chip_config.gyro_fifo_enable |
+ st->chip_config.magn_fifo_enable))
goto end_session;
bytes_per_datum = 0;
if (st->chip_config.accl_fifo_enable)
@@ -204,18 +148,21 @@
if (st->chip_config.gyro_fifo_enable)
bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR;
- if (st->chip_type == INV_ICM20602)
- bytes_per_datum += INV_ICM20602_BYTES_PER_TEMP_SENSOR;
+ if (st->chip_config.temp_fifo_enable)
+ bytes_per_datum += INV_MPU6050_BYTES_PER_TEMP_SENSOR;
+
+ if (st->chip_config.magn_fifo_enable)
+ bytes_per_datum += INV_MPU9X50_BYTES_MAGN;
/*
* read fifo_count register to know how many bytes are inside the FIFO
* right now
*/
- result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data,
- INV_MPU6050_FIFO_COUNT_BYTE);
+ result = regmap_bulk_read(st->map, st->reg->fifo_count_h,
+ st->data, INV_MPU6050_FIFO_COUNT_BYTE);
if (result)
goto end_session;
- fifo_count = get_unaligned_be16(&data[0]);
+ fifo_count = be16_to_cpup((__be16 *)&st->data[0]);
/*
* Handle fifo overflow by resetting fifo.
@@ -232,8 +179,8 @@
nb = fifo_count / bytes_per_datum;
inv_mpu6050_update_period(st, pf->timestamp, nb);
for (i = 0; i < nb; ++i) {
- result = regmap_bulk_read(st->map, st->reg->fifo_r_w,
- data, bytes_per_datum);
+ result = regmap_noinc_read(st->map, st->reg->fifo_r_w,
+ st->data, bytes_per_datum);
if (result)
goto flush_fifo;
/* skip first samples if needed */
@@ -242,7 +189,7 @@
continue;
}
timestamp = inv_mpu6050_get_timestamp(st);
- iio_push_to_buffers_with_timestamp(indio_dev, data, timestamp);
+ iio_push_to_buffers_with_timestamp(indio_dev, st->data, timestamp);
}
end_session:
--
Gitblit v1.6.2