From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/drivers/cpufreq/loongson2_cpufreq.c | 35 ++++++++++++-----------------------
1 files changed, 12 insertions(+), 23 deletions(-)
diff --git a/kernel/drivers/cpufreq/loongson2_cpufreq.c b/kernel/drivers/cpufreq/loongson2_cpufreq.c
index da34469..d05e761 100644
--- a/kernel/drivers/cpufreq/loongson2_cpufreq.c
+++ b/kernel/drivers/cpufreq/loongson2_cpufreq.c
@@ -20,10 +20,9 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
-#include <asm/clock.h>
#include <asm/idle.h>
-#include <asm/mach-loongson64/loongson.h>
+#include <asm/mach-loongson2ef/loongson.h>
static uint nowait;
@@ -58,29 +57,20 @@
loongson2_clockmod_table[index].driver_data) / 8;
/* setting the cpu frequency */
- clk_set_rate(policy->clk, freq * 1000);
+ loongson2_cpu_set_rate(freq);
return 0;
}
static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- struct clk *cpuclk;
int i;
unsigned long rate;
int ret;
- cpuclk = clk_get(NULL, "cpu_clk");
- if (IS_ERR(cpuclk)) {
- pr_err("couldn't get CPU clk\n");
- return PTR_ERR(cpuclk);
- }
-
rate = cpu_clock_freq / 1000;
- if (!rate) {
- clk_put(cpuclk);
+ if (!rate)
return -EINVAL;
- }
/* clock table init */
for (i = 2;
@@ -88,19 +78,16 @@
i++)
loongson2_clockmod_table[i].frequency = (rate * i) / 8;
- ret = clk_set_rate(cpuclk, rate * 1000);
- if (ret) {
- clk_put(cpuclk);
+ ret = loongson2_cpu_set_rate(rate);
+ if (ret)
return ret;
- }
- policy->clk = cpuclk;
- return cpufreq_generic_init(policy, &loongson2_clockmod_table[0], 0);
+ cpufreq_generic_init(policy, &loongson2_clockmod_table[0], 0);
+ return 0;
}
static int loongson2_cpufreq_exit(struct cpufreq_policy *policy)
{
- clk_put(policy->clk);
return 0;
}
@@ -143,9 +130,11 @@
u32 cpu_freq;
spin_lock_irqsave(&loongson2_wait_lock, flags);
- cpu_freq = LOONGSON_CHIPCFG(0);
- LOONGSON_CHIPCFG(0) &= ~0x7; /* Put CPU into wait mode */
- LOONGSON_CHIPCFG(0) = cpu_freq; /* Restore CPU state */
+ cpu_freq = readl(LOONGSON_CHIPCFG);
+ /* Put CPU into wait mode */
+ writel(readl(LOONGSON_CHIPCFG) & ~0x7, LOONGSON_CHIPCFG);
+ /* Restore CPU state */
+ writel(cpu_freq, LOONGSON_CHIPCFG);
spin_unlock_irqrestore(&loongson2_wait_lock, flags);
local_irq_enable();
}
--
Gitblit v1.6.2