From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001 From: hc <hc@nodka.com> Date: Mon, 13 May 2024 10:30:14 +0000 Subject: [PATCH] modify sin led gpio --- kernel/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt | 119 +++++++++++++++++++++++++++++++++++++++++++++++++++++++---- 1 files changed, 111 insertions(+), 8 deletions(-) diff --git a/kernel/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/kernel/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 601dd9f..1f9a62e 100644 --- a/kernel/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/kernel/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -12,6 +12,8 @@ "qcom,msm8916-mss-pil", "qcom,msm8974-mss-pil" "qcom,msm8996-mss-pil" + "qcom,msm8998-mss-pil" + "qcom,sc7180-mss-pil" "qcom,sdm845-mss-pil" - reg: @@ -28,24 +30,59 @@ - interrupts-extended: Usage: required Value type: <prop-encoded-array> - Definition: must list the watchdog, fatal IRQs ready, handover and - stop-ack IRQs + Definition: reference to the interrupts that match interrupt-names - interrupt-names: Usage: required Value type: <stringlist> - Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack" + Definition: The interrupts needed depends on the the compatible + string: + qcom,q6v5-pil: + qcom,ipq8074-wcss-pil: + qcom,msm8916-mss-pil: + qcom,msm8974-mss-pil: + must be "wdog", "fatal", "ready", "handover", "stop-ack" + qcom,msm8996-mss-pil: + qcom,msm8998-mss-pil: + qcom,sc7180-mss-pil: + qcom,sdm845-mss-pil: + must be "wdog", "fatal", "ready", "handover", "stop-ack", + "shutdown-ack" + +- firmware-name: + Usage: optional + Value type: <stringlist> + Definition: must list the relative firmware image paths for mba and + modem. They are used for booting and authenticating the + Hexagon core. - clocks: Usage: required Value type: <phandle> - Definition: reference to the iface, bus and mem clocks to be held on - behalf of the booting of the Hexagon core + Definition: reference to the clocks that match clock-names - clock-names: Usage: required Value type: <stringlist> - Definition: must be "iface", "bus", "mem" + Definition: The clocks needed depend on the compatible string: + qcom,ipq8074-wcss-pil: + no clock names required + qcom,q6v5-pil: + qcom,msm8916-mss-pil: + qcom,msm8974-mss-pil: + must be "iface", "bus", "mem", "xo" + qcom,msm8996-mss-pil: + must be "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "pnoc", "qdss" + qcom,msm8998-mss-pil: + must be "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "qdss" + qcom,sc7180-mss-pil: + must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi", + "nav" + qcom,sdm845-mss-pil: + must be "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "prng" - resets: Usage: required @@ -53,14 +90,39 @@ Definition: reference to the reset-controller for the modem sub-system reference to the list of 3 reset-controllers for the wcss sub-system + reference to the list of 2 reset-controllers for the modem + sub-system on SC7180, SDM845 SoCs - reset-names: Usage: required Value type: <stringlist> Definition: must be "mss_restart" for the modem sub-system - Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset" - for the wcss syb-system + must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset" + for the wcss sub-system + must be "mss_restart", "pdc_reset" for the modem + sub-system on SC7180, SDM845 SoCs +For devices where the mba and mpss sub-nodes are not specified, mba/mpss region +should be referenced as follows: +- memory-region: + Usage: required + Value type: <phandle> + Definition: reference to the reserved-memory for the mba region followed + by the mpss region + +For the compatible strings below the following supplies are required: + "qcom,q6v5-pil" + "qcom,msm8916-mss-pil", +- cx-supply: +- mx-supply: +- pll-supply: + Usage: required + Value type: <phandle> + Definition: reference to the regulators to be held on behalf of the + booting of the Hexagon core + +For the compatible string below the following supplies are required: + "qcom,msm8974-mss-pil" - cx-supply: - mss-supply: - mx-supply: @@ -69,6 +131,35 @@ Value type: <phandle> Definition: reference to the regulators to be held on behalf of the booting of the Hexagon core + +For the compatible string below the following supplies are required: + "qcom,msm8996-mss-pil" +- pll-supply: + Usage: required + Value type: <phandle> + Definition: reference to the regulators to be held on behalf of the + booting of the Hexagon core + +- power-domains: + Usage: required + Value type: <phandle> + Definition: reference to power-domains that match power-domain-names + +- power-domain-names: + Usage: required + Value type: <stringlist> + Definition: The power-domains needed depend on the compatible string: + qcom,q6v5-pil: + qcom,ipq8074-wcss-pil: + qcom,msm8916-mss-pil: + qcom,msm8974-mss-pil: + no power-domain names required + qcom,msm8996-mss-pil: + qcom,msm8998-mss-pil: + must be "cx", "mx" + qcom,sc7180-mss-pil: + qcom,sdm845-mss-pil: + must be "cx", "mx", "mss", "load_state" - qcom,smem-states: Usage: required @@ -88,6 +179,18 @@ by the three offsets within syscon for q6, modem and nc halt registers. +For the compatible strings below the following phandle references are required: + "qcom,sc7180-mss-pil" +- qcom,spare-regs: + Usage: required + Value type: <prop-encoded-array> + Definition: a phandle reference to a syscon representing TCSR followed + by the offset within syscon for conn_box_spare0 register + used by the modem sub-system running on SC7180 SoC. + +The Hexagon node must contain iommus property as described in ../iommu/iommu.txt +on platforms which do not have TrustZone. + = SUBNODES: The Hexagon node must contain two subnodes, named "mba" and "mpss" representing the memory regions used by the Hexagon firmware. Each sub-node must contain: -- Gitblit v1.6.2