From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/power/supply/charger-manager.txt | 30 ++++++++++++++++++++----------
1 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/power/supply/charger-manager.txt b/kernel/Documentation/devicetree/bindings/power/supply/charger-manager.txt
index ec4fe9d..b5ae906 100644
--- a/kernel/Documentation/devicetree/bindings/power/supply/charger-manager.txt
+++ b/kernel/Documentation/devicetree/bindings/power/supply/charger-manager.txt
@@ -3,24 +3,32 @@
Required properties :
- compatible : "charger-manager"
- - <>-supply : for regulator consumer
- - cm-num-chargers : number of chargers
+ - <>-supply : for regulator consumer, named according to cm-regulator-name
- cm-chargers : name of chargers
- cm-fuel-gauge : name of battery fuel gauge
- subnode <regulator> :
- cm-regulator-name : name of charger regulator
- subnode <cable> :
- - cm-cable-name : name of charger cable
+ - cm-cable-name : name of charger cable - one of USB, USB-HOST,
+ SDP, DCP, CDP, ACA, FAST-CHARGER, SLOW-CHARGER, WPT,
+ PD, DOCK, JIG, or MECHANICAL
- cm-cable-extcon : name of extcon dev
(optional) - cm-cable-min : minimum current of cable
(optional) - cm-cable-max : maximum current of cable
Optional properties :
- cm-name : charger manager's name (default : "battery")
- - cm-poll-mode : polling mode (enum polling_modes)
- - cm-poll-interval : polling interval
- - cm-battery-stat : battery status (enum data_source)
- - cm-fullbatt-* : data for full battery checking
+ - cm-poll-mode : polling mode - 0 for disabled, 1 for always, 2 for when
+ external power is connected, or 3 for when charging. If not present,
+ then polling is disabled
+ - cm-poll-interval : polling interval (in ms)
+ - cm-battery-stat : battery status - 0 for battery always present, 1 for no
+ battery, 2 to check presence via fuel gauge, or 3 to check presence
+ via charger
+ - cm-fullbatt-vchkdrop-volt : voltage drop (in uV) before restarting charging
+ - cm-fullbatt-voltage : voltage (in uV) of full battery
+ - cm-fullbatt-soc : state of charge to consider as full battery
+ - cm-fullbatt-capacity : capcity (in uAh) to consider as full battery
- cm-thermal-zone : name of external thermometer's thermal zone
- cm-battery-* : threshold battery temperature for charging
-cold : critical cold temperature of battery for charging
@@ -28,6 +36,10 @@
-hot : critical hot temperature of battery for charging
-temp-diff : temperature difference to allow recharging
- cm-dis/charging-max = limits of charging duration
+
+Deprecated properties:
+ - cm-num-chargers
+ - cm-fullbatt-vchkdrop-ms
Example :
charger-manager@0 {
@@ -39,13 +51,11 @@
cm-poll-mode = <1>;
cm-poll-interval = <30000>;
- cm-fullbatt-vchkdrop-ms = <30000>;
cm-fullbatt-vchkdrop-volt = <150000>;
cm-fullbatt-soc = <100>;
cm-battery-stat = <3>;
- cm-num-chargers = <3>;
cm-chargers = "charger0", "charger1", "charger2";
cm-fuel-gauge = "fuelgauge0";
@@ -71,7 +81,7 @@
cm-cable-max = <500000>;
};
cable@1 {
- cm-cable-name = "TA";
+ cm-cable-name = "SDP";
cm-cable-extcon = "extcon-dev.0";
cm-cable-min = <650000>;
cm-cable-max = <675000>;
--
Gitblit v1.6.2