From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/power/supply/battery.txt | 58 ++--------------------------------------------------------
1 files changed, 2 insertions(+), 56 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/power/supply/battery.txt b/kernel/Documentation/devicetree/bindings/power/supply/battery.txt
index f4d3b4a..a9f80cc 100644
--- a/kernel/Documentation/devicetree/bindings/power/supply/battery.txt
+++ b/kernel/Documentation/devicetree/bindings/power/supply/battery.txt
@@ -1,57 +1,3 @@
-Battery Characteristics
+The contents of this file has been moved to battery.yaml
-The devicetree battery node provides static battery characteristics.
-In smart batteries, these are typically stored in non-volatile memory
-on a fuel gauge chip. The battery node should be used where there is
-no appropriate non-volatile memory, or it is unprogrammed/incorrect.
-
-Upstream dts files should not include battery nodes, unless the battery
-represented cannot easily be replaced in the system by one of a
-different type. This prevents unpredictable, potentially harmful,
-behavior should a replacement that changes the battery type occur
-without a corresponding update to the dtb.
-
-Required Properties:
- - compatible: Must be "simple-battery"
-
-Optional Properties:
- - voltage-min-design-microvolt: drained battery voltage
- - energy-full-design-microwatt-hours: battery design energy
- - charge-full-design-microamp-hours: battery design capacity
- - precharge-current-microamp: current for pre-charge phase
- - charge-term-current-microamp: current for charge termination phase
- - constant-charge-current-max-microamp: maximum constant input current
- - constant-charge-voltage-max-microvolt: maximum constant input voltage
-
-Battery properties are named, where possible, for the corresponding
-elements in enum power_supply_property, defined in
-https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/power_supply.h
-
-Batteries must be referenced by chargers and/or fuel-gauges
-using a phandle. The phandle's property should be named
-"monitored-battery".
-
-Example:
-
- bat: battery {
- compatible = "simple-battery";
- voltage-min-design-microvolt = <3200000>;
- energy-full-design-microwatt-hours = <5290000>;
- charge-full-design-microamp-hours = <1430000>;
- precharge-current-microamp = <256000>;
- charge-term-current-microamp = <128000>;
- constant-charge-current-max-microamp = <900000>;
- constant-charge-voltage-max-microvolt = <4200000>;
- };
-
- charger: charger@11 {
- ....
- monitored-battery = <&bat>;
- ...
- };
-
- fuel_gauge: fuel-gauge@22 {
- ....
- monitored-battery = <&bat>;
- ...
- };
+Please note that not all charger drivers respect all of the properties.
--
Gitblit v1.6.2