From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 113 ++++++++++++++++++++++++++++++++++++++++++++------------
1 files changed, 88 insertions(+), 25 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/kernel/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 7fd4e8c..b61c2d5 100644
--- a/kernel/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/kernel/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -21,10 +21,22 @@
SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi".
-Optional properties:
- reg: Address and length of the register set for the device.
- reg-names: Must include the list of following reg names,
"membase"
+- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi"
+ compatible target.
+ reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi"
+ compatible target.
+ Must contain interrupt-names property per entry for
+ "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets.
+
+- interrupt-names: Must include the entries for MSI interrupt
+ names ("msi0" to "msi15") and legacy interrupt
+ name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi"
+ compatible targets.
+
+Optional properties:
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reseti.txt for details.
- reset-names: Must include the list of following reset names,
@@ -37,12 +49,9 @@
- clocks: List of clock specifiers, must contain an entry for each required
entry in clock-names.
- clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref",
- "wifi_wcss_rtc".
-- interrupts: List of interrupt lines. Must contain an entry
- for each entry in the interrupt-names property.
-- interrupt-names: Must include the entries for MSI interrupt
- names ("msi0" to "msi15") and legacy interrupt
- name ("legacy"),
+ "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and
+ "cxo_ref_clk_pin" and optionally "qdss" for "qcom,wcn3990-wifi"
+ compatible target.
- qcom,msi_addr: MSI interrupt address.
- qcom,msi_base: Base value to add before writing MSI data into
MSI address register.
@@ -55,9 +64,51 @@
- qcom,ath10k-pre-calibration-data : pre calibration data as an array,
the length can vary between hw versions.
- <supply-name>-supply: handle to the regulator device tree node
- optional "supply-name" is "vdd-0.8-cx-mx".
+ optional "supply-name" are "vdd-0.8-cx-mx",
+ "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0",
+ and "vdd-3.3-ch1".
+- memory-region:
+ Usage: optional
+ Value type: <phandle>
+ Definition: reference to the reserved-memory for the msa region
+ used by the wifi firmware running in Q6.
+- iommus:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: A list of phandle and IOMMU specifier pairs.
+- ext-fem-name:
+ Usage: Optional
+ Value type: string
+ Definition: Name of external front end module used. Some valid FEM names
+ for example: "microsemi-lx5586", "sky85703-11"
+ and "sky85803" etc.
+- qcom,snoc-host-cap-8bit-quirk:
+ Usage: Optional
+ Value type: <empty>
+ Definition: Quirk specifying that the firmware expects the 8bit version
+ of the host capability QMI request
+- qcom,xo-cal-data: xo cal offset to be configured in xo trim register.
-Example (to supply the calibration data alone):
+- qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically
+ mapped msa region.
+
+- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex
+ support by the hardware.
+- qcom,coexist-gpio-pin : gpio pin number information to support coex
+ which will be used by wifi firmware.
+
+* Subnodes
+The ath10k wifi node can contain one optional firmware subnode.
+Firmware subnode is needed when the platform does not have TustZone.
+The firmware subnode must have:
+
+- iommus:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A list of phandle and IOMMU specifier pairs.
+
+
+Example (to supply PCI based wifi block details):
In this example, the node is defined as child node of the PCI controller.
@@ -69,10 +120,10 @@
#address-cells = <3>;
device_type = "pci";
- ath10k@0,0 {
+ wifi@0,0 {
reg = <0 0 0 0 0>;
- device_type = "pci";
qcom,ath10k-calibration-data = [ 01 02 03 ... ];
+ ext-fem-name = "microsemi-lx5586";
};
};
};
@@ -125,6 +176,8 @@
qcom,msi_addr = <0x0b006040>;
qcom,msi_base = <0x40>;
qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ];
+ qcom,coexist-support = <1>;
+ qcom,coexist-gpio-pin = <0x33>;
};
Example (to supply wcn3990 SoC wifi block details):
@@ -133,20 +186,30 @@
compatible = "qcom,wcn3990-wifi";
reg = <0x18800000 0x800000>;
reg-names = "membase";
- clocks = <&clock_gcc clk_aggre2_noc_clk>;
- clock-names = "smmu_aggre2_noc_clk"
+ clocks = <&clock_gcc clk_rf_clk2_pin>;
+ clock-names = "cxo_ref_clk_pin";
interrupts =
- <0 130 0 /* CE0 */ >,
- <0 131 0 /* CE1 */ >,
- <0 132 0 /* CE2 */ >,
- <0 133 0 /* CE3 */ >,
- <0 134 0 /* CE4 */ >,
- <0 135 0 /* CE5 */ >,
- <0 136 0 /* CE6 */ >,
- <0 137 0 /* CE7 */ >,
- <0 138 0 /* CE8 */ >,
- <0 139 0 /* CE9 */ >,
- <0 140 0 /* CE10 */ >,
- <0 141 0 /* CE11 */ >;
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
vdd-0.8-cx-mx-supply = <&pm8998_l5>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+ vdd-3.3-ch1-supply = <&vreg_l26a_3p3>;
+ memory-region = <&wifi_msa_mem>;
+ iommus = <&apps_smmu 0x0040 0x1>;
+ qcom,msa-fixed-perm;
+ wifi-firmware {
+ iommus = <&apps_iommu 0xc22 0x1>;
+ };
};
--
Gitblit v1.6.2