From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/net/mediatek-net.txt | 15 +++++++++++++--
1 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/net/mediatek-net.txt b/kernel/Documentation/devicetree/bindings/net/mediatek-net.txt
index 503f2b9..72d03e0 100644
--- a/kernel/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/kernel/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -11,6 +11,8 @@
"mediatek,mt2701-eth": for MT2701 SoC
"mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC
"mediatek,mt7622-eth": for MT7622 SoC
+ "mediatek,mt7629-eth": for MT7629 SoC
+ "ralink,rt5350-eth": for Ralink Rt5350F and MT7628/88 SoC
- reg: Address and length of the register set for the device
- interrupts: Should contain the three frame engines interrupts in numeric
order. These are fe_int0, fe_int1 and fe_int2.
@@ -19,14 +21,23 @@
"ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC
"ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m",
"sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC
+ "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "sgmii_tx250m",
+ "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii2_tx250m",
+ "sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck",
+ "eth2pll" : For MT7629 SoC.
- power-domains: phandle to the power domain that the ethernet is part of
- resets: Should contain phandles to the ethsys reset signals
- reset-names: Should contain the names of reset signal listed in the resets
property
These are "fe", "gmac" and "ppe"
- mediatek,ethsys: phandle to the syscon node that handles the port setup
-- mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup
- which is required for those SoCs equipped with SGMII such as MT7622 SoC.
+- mediatek,infracfg: phandle to the syscon node that handles the path from
+ GMAC to PHY variants, which is required for MT7629 SoC.
+- mediatek,sgmiisys: a list of phandles to the syscon node that handles the
+ SGMII setup which is required for those SoCs equipped with SGMII such
+ as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared
+ by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed
+ to GMAC1 and GMAC2, respectively.
- mediatek,pctl: phandle to the syscon node that handles the ports slew rate
and driver current: only for MT2701 and MT7623 SoC
--
Gitblit v1.6.2