From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/net/dsa/ksz.txt | 155 ++++++++++++++++++++++++++++++++++-----------------
1 files changed, 104 insertions(+), 51 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/net/dsa/ksz.txt b/kernel/Documentation/devicetree/bindings/net/dsa/ksz.txt
index ac145b8..95e91e8 100644
--- a/kernel/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ b/kernel/Documentation/devicetree/bindings/net/dsa/ksz.txt
@@ -5,8 +5,23 @@
- compatible: For external switch chips, compatible string must be exactly one
of the following:
+ - "microchip,ksz8765"
+ - "microchip,ksz8794"
+ - "microchip,ksz8795"
- "microchip,ksz9477"
- "microchip,ksz9897"
+ - "microchip,ksz9896"
+ - "microchip,ksz9567"
+ - "microchip,ksz8565"
+ - "microchip,ksz9893"
+ - "microchip,ksz9563"
+ - "microchip,ksz8563"
+
+Optional properties:
+
+- reset-gpios : Should be a gpio specifier for a reset line
+- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to
+ 125MHz instead of 25MHz.
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required and optional properties.
@@ -15,58 +30,96 @@
Ethernet switch connected via SPI to the host, CPU port wired to eth0:
- eth0: ethernet@10001000 {
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
+ eth0: ethernet@10001000 {
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
- spi1: spi@f8008000 {
- pinctrl-0 = <&pinctrl_spi_ksz>;
- cs-gpios = <&pioC 25 0>;
- id = <1>;
+ spi1: spi@f8008000 {
+ pinctrl-0 = <&pinctrl_spi_ksz>;
+ cs-gpios = <&pioC 25 0>;
+ id = <1>;
- ksz9477: ksz9477@0 {
- compatible = "microchip,ksz9477";
- reg = <0>;
+ ksz9477: ksz9477@0 {
+ compatible = "microchip,ksz9477";
+ reg = <0>;
- spi-max-frequency = <44000000>;
- spi-cpha;
- spi-cpol;
+ spi-max-frequency = <44000000>;
+ spi-cpha;
+ spi-cpol;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- label = "lan1";
- };
- port@1 {
- reg = <1>;
- label = "lan2";
- };
- port@2 {
- reg = <2>;
- label = "lan3";
- };
- port@3 {
- reg = <3>;
- label = "lan4";
- };
- port@4 {
- reg = <4>;
- label = "lan5";
- };
- port@5 {
- reg = <5>;
- label = "cpu";
- ethernet = <ð0>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
- };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan5";
+ };
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ ksz8565: ksz8565@0 {
+ compatible = "microchip,ksz8565";
+ reg = <0>;
+
+ spi-max-frequency = <44000000>;
+ spi-cpha;
+ spi-cpol;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <ð0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
--
Gitblit v1.6.2