From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/net/cpsw.txt | 12 ++++++++++--
1 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/net/cpsw.txt b/kernel/Documentation/devicetree/bindings/net/cpsw.txt
index b3acebe..7c7ac5e 100644
--- a/kernel/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/kernel/Documentation/devicetree/bindings/net/cpsw.txt
@@ -22,7 +22,8 @@
- cpsw-phy-sel : Specifies the phandle to the CPSW phy mode selection
device. See also cpsw-phy-sel.txt for it's binding.
Note that in legacy cases cpsw-phy-sel may be
- a child device instead of a phandle.
+ a child device instead of a phandle
+ (DEPRECATED, use phys property instead).
Optional properties:
- ti,hwmods : Must be "cpgmac0"
@@ -44,12 +45,15 @@
Slave Properties:
Required properties:
- phy-mode : See ethernet.txt file in the same directory
+- phys : phandle on phy-gmii-sel PHY (see phy/ti-phy-gmii-sel.txt)
Optional properties:
- dual_emac_res_vlan : Specifies VID to be used to segregate the ports
-- mac-address : See ethernet.txt file in the same directory
- phy_id : Specifies slave phy id (deprecated, use phy-handle)
- phy-handle : See ethernet.txt file in the same directory
+
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
Slave sub-nodes:
- fixed-link : See fixed-link.txt file in the same directory
@@ -85,12 +89,14 @@
phy-mode = "rgmii-txid";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1 0>;
};
cpsw_emac1: slave@1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii-txid";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2 0>;
};
};
@@ -114,11 +120,13 @@
phy-mode = "rgmii-txid";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1 0>;
};
cpsw_emac1: slave@1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii-txid";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2 0>;
};
};
--
Gitblit v1.6.2