From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/kernel/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
index bb2075d..945be7d 100644
--- a/kernel/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
+++ b/kernel/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
@@ -4,6 +4,7 @@
- compatible : should be one of the following:
Generic default - "cdns,qspi-nor".
For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
+ For TI AM654 SoC - "ti,am654-ospi", "cdns,qspi-nor".
- reg : Contains two entries, each of which is a tuple consisting of a
physical address and length. The first entry is the address and
length of the controller register set. The second entry is the
@@ -34,6 +35,9 @@
(qspi_n_ss_out).
- cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low
and first bit transfer.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include either "qspi" and/or "qspi-ocp".
Example:
@@ -49,6 +53,8 @@
cdns,fifo-depth = <128>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x00000000>;
+ resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
+ reset-names = "qspi", "qspi-ocp";
flash0: n25q00@0 {
...
--
Gitblit v1.6.2