From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt | 19 +++++++++++--------
1 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/kernel/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index bcda1df..44335a4 100644
--- a/kernel/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/kernel/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -20,6 +20,8 @@
"brcm,brcmnand" and an appropriate version compatibility
string, like "brcm,brcmnand-v7.0"
Possible values:
+ brcm,brcmnand-v2.1
+ brcm,brcmnand-v2.2
brcm,brcmnand-v4.0
brcm,brcmnand-v5.0
brcm,brcmnand-v6.0
@@ -28,17 +30,18 @@
brcm,brcmnand-v7.0
brcm,brcmnand-v7.1
brcm,brcmnand-v7.2
+ brcm,brcmnand-v7.3
brcm,brcmnand
- reg : the register start and length for NAND register region.
(optional) Flash DMA register range (if present)
(optional) NAND flash cache range (if at non-standard offset)
- reg-names : a list of the names corresponding to the previous register
ranges. Should contain "nand" and (optionally)
- "flash-dma" and/or "nand-cache".
-- interrupts : The NAND CTLRDY interrupt and (if Flash DMA is available)
- FLASH_DMA_DONE
-- interrupt-names : May be "nand_ctlrdy" or "flash_dma_done", if broken out as
- individual interrupts.
+ "flash-dma" or "flash-edu" and/or "nand-cache".
+- interrupts : The NAND CTLRDY interrupt, (if Flash DMA is available)
+ FLASH_DMA_DONE and if EDU is avaialble and used FLASH_EDU_DONE
+- interrupt-names : May be "nand_ctlrdy" or "flash_dma_done" or "flash_edu_done",
+ if broken out as individual interrupts.
May be "nand", if the SoC has the individual NAND
interrupts multiplexed behind another custom piece of
hardware
@@ -101,12 +104,12 @@
number (e.g., 0, 1, 2, etc.)
- #address-cells : see partition.txt
- #size-cells : see partition.txt
-- nand-ecc-strength : see nand.txt
-- nand-ecc-step-size : must be 512 or 1024. See nand.txt
Optional properties:
+- nand-ecc-strength : see nand-controller.yaml
+- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml
- nand-on-flash-bbt : boolean, to enable the on-flash BBT for this
- chip-select. See nand.txt
+ chip-select. See nand-controller.yaml
- brcm,nand-oob-sector-size : integer, to denote the spare area sector size
expected for the ECC layout in use. This size, in
addition to the strength and step-size,
--
Gitblit v1.6.2