From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/firmware/qcom,scm.txt | 38 ++++++++++++++++++++++++++------------
1 files changed, 26 insertions(+), 12 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/kernel/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index fcf6979..7845643 100644
--- a/kernel/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/kernel/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -7,16 +7,28 @@
Required properties:
- compatible: must contain one of the following:
- * "qcom,scm-apq8064" for APQ8064 platforms
- * "qcom,scm-msm8660" for MSM8660 platforms
- * "qcom,scm-msm8690" for MSM8690 platforms
- * "qcom,scm-msm8996" for MSM8996 platforms
- * "qcom,scm-ipq4019" for IPQ4019 platforms
- * "qcom,scm" for later processors (MSM8916, APQ8084, MSM8974, etc)
-- clocks: One to three clocks may be required based on compatible.
- * No clock required for "qcom,scm-msm8996", "qcom,scm-ipq4019"
- * Only core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660", and "qcom,scm-msm8960"
- * Core, iface, and bus clocks required for "qcom,scm"
+ * "qcom,scm-apq8064"
+ * "qcom,scm-apq8084"
+ * "qcom,scm-ipq4019"
+ * "qcom,scm-ipq806x"
+ * "qcom,scm-ipq8074"
+ * "qcom,scm-msm8660"
+ * "qcom,scm-msm8916"
+ * "qcom,scm-msm8960"
+ * "qcom,scm-msm8974"
+ * "qcom,scm-msm8994"
+ * "qcom,scm-msm8996"
+ * "qcom,scm-msm8998"
+ * "qcom,scm-sc7180"
+ * "qcom,scm-sdm845"
+ * "qcom,scm-sm8150"
+ and:
+ * "qcom,scm"
+- clocks: Specifies clocks needed by the SCM interface, if any:
+ * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
+ "qcom,scm-msm8960"
+ * core, iface and bus clocks required for "qcom,scm-apq8084",
+ "qcom,scm-msm8916" and "qcom,scm-msm8974"
- clock-names: Must contain "core" for the core clock, "iface" for the interface
clock and "bus" for the bus clock per the requirements of the compatible.
- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
@@ -26,8 +38,10 @@
firmware {
scm {
- compatible = "qcom,scm";
- clocks = <&gcc GCC_CRYPTO_CLK> , <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
+ compatible = "qcom,msm8916", "qcom,scm";
+ clocks = <&gcc GCC_CRYPTO_CLK> ,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "core", "bus", "iface";
};
};
--
Gitblit v1.6.2