From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/dma/dma.txt | 110 ------------------------------------------------------
1 files changed, 1 insertions(+), 109 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/dma/dma.txt b/kernel/Documentation/devicetree/bindings/dma/dma.txt
index 6312fb0..90a67a0 100644
--- a/kernel/Documentation/devicetree/bindings/dma/dma.txt
+++ b/kernel/Documentation/devicetree/bindings/dma/dma.txt
@@ -1,109 +1 @@
-* Generic DMA Controller and DMA request bindings
-
-Generic binding to provide a way for a driver using DMA Engine to retrieve the
-DMA request or channel information that goes from a hardware device to a DMA
-controller.
-
-
-* DMA controller
-
-Required property:
-- #dma-cells: Must be at least 1. Used to provide DMA controller
- specific information. See DMA client binding below for
- more details.
-
-Optional properties:
-- dma-channels: Number of DMA channels supported by the controller.
-- dma-requests: Number of DMA request signals supported by the
- controller.
-
-Example:
-
- dma: dma@48000000 {
- compatible = "ti,omap-sdma";
- reg = <0x48000000 0x1000>;
- interrupts = <0 12 0x4
- 0 13 0x4
- 0 14 0x4
- 0 15 0x4>;
- #dma-cells = <1>;
- dma-channels = <32>;
- dma-requests = <127>;
- };
-
-* DMA router
-
-DMA routers are transparent IP blocks used to route DMA request lines from
-devices to the DMA controller. Some SoCs (like TI DRA7x) have more peripherals
-integrated with DMA requests than what the DMA controller can handle directly.
-
-Required property:
-- dma-masters: phandle of the DMA controller or list of phandles for
- the DMA controllers the router can direct the signal to.
-- #dma-cells: Must be at least 1. Used to provide DMA router specific
- information. See DMA client binding below for more
- details.
-
-Optional properties:
-- dma-requests: Number of incoming request lines the router can handle.
-- In the node pointed by the dma-masters:
- - dma-requests: The router driver might need to look for this in order
- to configure the routing.
-
-Example:
- sdma_xbar: dma-router@4a002b78 {
- compatible = "ti,dra7-dma-crossbar";
- reg = <0x4a002b78 0xfc>;
- #dma-cells = <1>;
- dma-requests = <205>;
- ti,dma-safe-map = <0>;
- dma-masters = <&sdma>;
- };
-
-* DMA client
-
-Client drivers should specify the DMA property using a phandle to the controller
-followed by DMA controller specific data.
-
-Required property:
-- dmas: List of one or more DMA specifiers, each consisting of
- - A phandle pointing to DMA controller node
- - A number of integer cells, as determined by the
- #dma-cells property in the node referenced by phandle
- containing DMA controller specific information. This
- typically contains a DMA request line number or a
- channel number, but can contain any data that is
- required for configuring a channel.
-- dma-names: Contains one identifier string for each DMA specifier in
- the dmas property. The specific strings that can be used
- are defined in the binding of the DMA client device.
- Multiple DMA specifiers can be used to represent
- alternatives and in this case the dma-names for those
- DMA specifiers must be identical (see examples).
-
-Examples:
-
-1. A device with one DMA read channel, one DMA write channel:
-
- i2c1: i2c@1 {
- ...
- dmas = <&dma 2 /* read channel */
- &dma 3>; /* write channel */
- dma-names = "rx", "tx";
- ...
- };
-
-2. A single read-write channel with three alternative DMA controllers:
-
- dmas = <&dma1 5
- &dma2 7
- &dma3 2>;
- dma-names = "rx-tx", "rx-tx", "rx-tx";
-
-3. A device with three channels, one of which has two alternatives:
-
- dmas = <&dma1 2 /* read channel */
- &dma1 3 /* write channel */
- &dma2 0 /* error read */
- &dma3 0>; /* alternative error read */
- dma-names = "rx", "tx", "error", "error";
+This file has been moved to dma-controller.yaml.
--
Gitblit v1.6.2