From 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 13 May 2024 10:30:14 +0000
Subject: [PATCH] modify sin led gpio
---
kernel/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/kernel/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
index 47cb1d1..cd17684 100644
--- a/kernel/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
+++ b/kernel/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
@@ -1,4 +1,4 @@
-Analog Device AXI-DMAC DMA controller
+Analog Devices AXI-DMAC DMA controller
Required properties:
- compatible: Must be "adi,axi-dmac-1.00.a".
@@ -18,7 +18,6 @@
Required channel sub-node properties:
- reg: Which channel this node refers to.
- - adi,length-width: Width of the DMA transfer length register.
- adi,source-bus-width,
adi,destination-bus-width: Width of the source or destination bus in bits.
- adi,source-bus-type,
@@ -28,7 +27,8 @@
1 (AXI_DMAC_TYPE_AXI_STREAM): Streaming AXI interface
2 (AXI_DMAC_TYPE_AXI_FIFO): FIFO interface
-Optional channel properties:
+Deprecated optional channel properties:
+ - adi,length-width: Width of the DMA transfer length register.
- adi,cyclic: Must be set if the channel supports hardware cyclic DMA
transfers.
- adi,2d: Must be set if the channel supports hardware 2D DMA transfers.
--
Gitblit v1.6.2